ITC 69641 User manual

Brand: ITC

Model: 69641

Type: User manual

3030 Corporate Grove Dr.

Hudsonville, MI 49426

Phone: 616.396.1355

itc-us.com

Safety Instructions

• Disconnect power before installing, adding or changing any component.

• To avoid a hazard to children, account for all parts and destroy all packing materials.

• Do not install any luminaire assembly closer than 6” from any combustible materials.

• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.

• All electrical connections should be made inside a watertight junction box.

PARTS / TOOLS NEEDED:

Vertical Nav Light Power Drill Butt Splices (not provided)

INSTALLATION INSTRUCTIONS

Vertical Nav Light

Part#: 69641

For warranty information please visit www.itc-us.com/warranty-return-policy

Rev A • 11/02/22

Page 1 of 1

1. Remove bezel if not already disassembled.

2. Determine the installation location for your light. Once determined drill a 0.5” hole.

3. Connect wires to power source.

4. Feed wires back through the hole and screw the light in place using the screws provided.

5. Reattach bezel.

1

ITC 69641 User manual

Brand: ITC

Model: 69641

Type: User manual

Related papers

Other documents