2. ITC
  3. 69923S
69923S

ITC 69923S User manual

  • I've reviewed the installation instructions for the ITC reading lights models 69923S and 69924S. The document outlines the necessary steps for properly setting up the lights, including wiring and mounting. I'm ready to answer your questions about the installation process or other details from the instructions.
  • What power source is required for the reading light?
    What tools are needed for installation?
    What should be done before starting the installation?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev A •11/22/22
1. Determine the installation location and use the bezel to
mark and drill screw holes and wiring hole.
PARTS/TOOLS NEEDED:
View or Bella Reading Light Mounting Screws
(Qty: 2)
Butt Splice Connectors
(Not Provided) Power Drill
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive (+) input.
3. Feed the wires back through the hole and screw the
light down.
INSTALLATION INSTRUCTIONS
Compass™ Reading Light
Part#: 69923S & 69924S
Page 1 of 1
2. Using the wiring diagrams below, wire the light to the
incoming 12V DC power. Test the light.
Black (-)
12V DC (+)
Overhead
Light
White (-)
Black (+)
Incoming
12V DC
Power
/