Winmate FA30-210 User manual

Brand: Winmate

Model: FA30-210

Type: User manual

FA30-210 Motherboard

3.5” SBC with Freescale® iMX6 Dual Core Processor

User Manual

Version 1.1

Document Part Number:

9171111I103L

- 2 -

Contents

PREFACE ................................................................................................................................................ - 3 -

ABOUT THIS USER MANUAL .................................................................................................................. - 6 -

CHAPTER 1: GENERAL INFORMATION ................................................................................................... - 8 -

1.1 INTRODUCTION ...................................................................................................................................... - 8 -

1.2 FEATURES ............................................................................................................................................. - 8 -

1.3 PACKAGE CONTENTS ............................................................................................................................... - 9 -

1.4 MOTHERBOARD SPECIFICATIONS ............................................................................................................... - 9 -

1.5 FUNCTIONAL DESCRIPTION ..................................................................................................................... - 11 -

1.6 PHYSICAL DESCRIPTION ......................................................................................................................... - 12 -

CHAPTER 2: HARDWARE INSTALLATION .............................................................................................. - 14 -

2.1 MOTHERBOARD COMPONENTS ............................................................................................................... - 14 -

2.1.1 Component Side ...................................................................................................................... - 14 -

2.1.2 Soldier Side .............................................................................................................................. - 15 -

2.1.3 I/O Side .................................................................................................................................... - 16 -

2.2.1 JUMPERS ......................................................................................................................................... - 16 -

2.2.1 Jumper List .............................................................................................................................. - 17 -

2.3 CONNECTORS ...................................................................................................................................... - 19 -

2.3.1 Front Side Setting Description ................................................................................................. - 20 -

2.3.2 I/O Description ........................................................................................................................ - 27 -

2.4 CONFIGURING SERIAL PORT SETTINGS IN ANDROID OS ................................................................................ - 30 -

CHAPTER 3: SOFTWARE PROGRAMMING GUIDE ................................................................................. - 34 -

3.1 ANDROID PROGRAMMING GUIDE ............................................................................................................ - 34 -

3.1.1 ADB Installation ....................................................................................................................... - 34 -

3.1.2 GPIO ........................................................................................................................................ - 35 -

3.1.3 CAN BUS .................................................................................................................................. - 35 -

3.1.4 UART Sample Code .................................................................................................................. - 35 -

3.1.5 OTA Update Guide ................................................................................................................... - 36 -

3.2 LINUX AND UBUNTU PROGRAMMING GUIDE ............................................................................................. - 41 -

3.2.1 GPIO ........................................................................................................................................ - 41 -

3.2.2 CAN BUS .................................................................................................................................. - 41 -

3.2.3 UART Switch ............................................................................................................................ - 41 -

CHAPTER 4: TECHNICAL SUPPORT ....................................................................................................... - 43 -

USER MANUAL PREFACE

- 3 -

PREFACE

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve

design and/or performance. We assume no responsibility or liability for the use of

the described product(s), conveys no license or title under any patent, copyright,

or masks work rights to these products, and makes no representations or

warranties that these products are free from patent, copyright, or mask work right

infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or warranty

that such application will be suitable for the specified use without further testing or

modification.

Warranty

We warrant that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. (Standard is one year,

extended warranty will need to discuss with our sales representatives. If the

customer discovers a defect, we will, at its option, repair or replace the defective

product at no charge to the customer, provided it is returned during the warranty

period of one year, with transportation charges prepaid. The returned product

must be properly packaged in its original packaging to obtain warranty service.

If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth

digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W17Axxxxxxxx means October of year 2017.

USER MANUAL PREFACE

- 4 -

Customer Service

We provide a service guide as below for any problem by the following steps: First,

contact your distributor, sales representative, or our customer service center for

technical support if you need additional assistance. You need to prepare the

following information before you call:

 Product serial number

 Peripheral attachments

 Software (OS, version, application software, etc.)

 Detailed problem description

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products. Please do not

hesitate to call or e-mail us.

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful

information or to alert you to the potential for hardware damage or personal injury.

These are Notes, Important, Cautions, and Warnings. The following is an example

of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to

know.

CAUTION

A Caution alert indicates potential damage to hardware and explains

how to avoid the potential problem.

WARNING!

An Electrical Shock Warning indicates the potential harm from

electrical hazards and how to avoid the potential problem.

USER MANUAL PREFACE

- 5 -

Safety Precautions

CAUTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Safety and Warranty

1. Please read these safety instructions carefully.

2. Please keep this user manual for later reference.

3. Please disconnect this equipment from any AC outlet before cleaning. Do not

use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

7. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

8. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

11. If any of the following situations arises, get the equipment checked by service

personnel:

A. The power cord or plug is damaged.

B. Liquid has penetrated into the equipment.

C. The equipment has been exposed to moisture.

D. The equipment does not work well, or you cannot get it to work according

to the user’s manual.

E. The equipment has been dropped and damaged.

F. The equipment has obvious signs of breakage.

USER MANUAL ABOUT THIS USER MANUAL

- 6 -

ABOUT THIS USER MANUAL

This User Manual provides information about the FA30-210 Motherboard.

NOTE:

Some pictures in this guide are samples and can differ from actual

product.

Chapter Descriptions

Chapter 1, General Information provides general information about the FA30-210

Motherboard including layout, mechanical dimensions and product specifications.

Chapter 2, Hardware Installation provides information on motherboard

components, jumper settings and connector pin assignment of the FA30-210

Motherboard.

Chapter 3, Software Programming Guide provides instructions on software

installation for all supported operating systems.

Chapter 4, Technical Support provides the directory to technical support for

FA30-210 Motherboard.

Document Revision History

Version

Date

Note

1.0

14-Jun-2017

Initial document release

1.1

13-Apr-2018

Revise p.13 (Boot Mode

Selector settings), update to

Android 6.0

USER MANUAL CHAPTER 1 GENERAL INFORMATION

- 7 -

General Information

This chapter includes the FA30-210

Motherboard background information.

Sections include:

1.1 Introduction

1.2 Features

1.3 Packing Contents

1.4 Motherboard Specifications

1.5 Functional Description

1.6 Physical Description

USER MANUAL CHAPTER 1 GENERAL INFORMATION

- 8 -

CHAPTER 1: GENERAL INFORMATION

This chapter includes the FA30-210 Motherboard background information.

1.1 Introduction

Thank you for choosing the FA30-210 Motherboard. This motherboard is an

integrated package that provides a complete RISC platform for project evaluation,

application development and solution feasibility testing that decreases lead-time

and lowers initial cost and investment.

FA30-210 Motherboard empowered by a Freescale® Cortex™ – A9 iMX6 Dual

Core 1 GHz processor. In peripheral connectivity, FA30-210 SBC features serial

port connector, CAN BUS connector, and USB 2.0 A-type connector, LAN port

with PoE function support, Micro HDMI, Debug port, and one Micro SD card slot.

1.2 Features

FA30-210 Motherboard has the following features:

 3.5” Form Factor (146 mm x 91 mm)

 Freescale Cortex™ – A9 iMX6 Dual Core 1 GHz processor

 Supports Android 4.4/ Linux Kernel 3.0.35, QT 5.4 Browser/ Ubuntu 16.04

 One Micro SD/SDHC card slot

 Built-in 16 GB eMMC

 Micro HDMI Output

 Power Over Ethernet (PoE) supported (Optional)

USER MANUAL CHAPTER 1 GENERAL INFORMATION

- 9 -

1.3 Package Contents

Inspect the equipment for damage. If any equipment is missing or damaged,

Standard packing list includes:

Motherboard

User Manual

(Hardcopy)

Driver CD

* Pictures are for reference only and can differ from actual product.

** The packing contents may vary according to your order.

*** If you need to purchase the optional accessories or request part numbers, please

contact our sales representatives.

1.4 Motherboard Specifications

Model Name

FA30-210

System

Specifications

CPU

Freescale® Cortex™ A9 iMX6 Dual Core

System Memory

1GB DDR3 (2GB for Optional)

Storage

On board 16GB eMMC/mSATA

Expansion Slot

1 x MicroSD/ SDHC Card Slot

Android 6.0(Default)

Linux 3.0.35 QT 5.4 (Optional)

Ubuntu 16.04 (Optional)

I/O Interface

External I/O

1 x DC In Terminal Block (2-pin)

1 x USB A-type (Host)

1 x RS232/ 422/ 485 selectable COM Port (DB9)

USER MANUAL CHAPTER 1 GENERAL INFORMATION

- 10 -

1 x CAN Bus (DB9)

1 x RJ-45 10/100/1000 (PoE optional)

1 x Micro SD Card Slot

1 x USB OTG

1 x Mini USB (for debug)

1 x Micro-HDMI Output

Internal I/O

1 x LVDS by pin-header

1 x Backlight connector

1 x I2C Touch connector

1 x USB Touch connector

5 x USB pin-header (5 x 4 pin)

2 x UART pin-headers (Optional)

1 x Digital I/O with 3.3V (8-pin GPIO)

1 x Mini-PCIe Connector

1 x 3.3V Power Output

1 x 5V Power Output

1 x Power-input Bypass Output

1 x Reset Input

2 x Audio Output (Left & Right)

1 x Microphone Input

1 x CAN Bus by pin-header (non-isolation)

(optional)

Power

Requirements

Power Input

DC IN 9~24V

Power Consumption

Physical

Characteristics

Dimensions

(W x H x D)

146 mm x 91.6 mm (3.5" Form Factor)

Environment

Operating Temperature

-20 deg. C to +60 deg. C

Storage Temperature

-40 deg. C to +70 deg. C

Operating Humidity

10% to 95% (non-condensing, RH)

USER MANUAL CHAPTER 1 GENERAL INFORMATION

- 11 -

1.5 Functional Description

FA30-210 Function Block

USER MANUAL CHAPTER 1 GENERAL INFORMATION

- 12 -

1.6 Physical Description

FA30-210 Board Dimensions

Unit: mm

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 13 -

Hardware Installation

This chapter introduces the setup procedures of

the FA30-210 motherboard, including

instructions on how to connect jumpers and

peripherals, and mechanical drawings.

Sections include:

2.1 Motherboard Components

2.2 Jumpers

2.3 Connectors

2.4 Configuring Serial Port Settings

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 14 -

CHAPTER 2: HARDWARE INSTALLATION

This chapter introduces the setup procedures of the FA30-210 platform, including

instructions on how to connect jumpers and peripherals, and mechanical drawings.

Carefully read the content of this chapter in order to avoid any damages.

2.1 Motherboard Components

This section explains the location of the components on the FA30-210

motherboard.

2.1.1 Component Side

Connectors

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 15 -

Jumpers and switches

2.1.2 Soldier Side

SW1

USB

2.0

Mini-PCIE

Half Card

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 16 -

2.1.3 I/O Side

2.2.1 Jumpers

This section explains how to set jumpers for correct configuration of the

motherboard. A metal-bridge jumper used to close an electric circuit, and it usually

consists of two metal pins and one small clip protected by a plastic cover that

slides over the pins to connect them. Users can connect the pins with the clip to

close a jumper, and remove the clip to open a jumper. Generally, a jumper will

have three pins which labeled 1, 2, and 3.

The jumper setting diagram is shown below. When the jumper cap is placed on

both pins, the jumper is SHORT. The illustration below shows a 3-pin jumper; pins

1 and 2 are short. If you remove the jumper cap, the jumper is OPEN.

PIN 1-2 SHORT

NOTE:

A pair of needle nose pliers may be helpful when working with

jumpers. If you have any doubts about the best hardware

configuration for your application, contact your local distributor or

sales representative before you make any changes. Generally, you

simply need a standard cable to make most connections.

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 17 -

2.2.1 Jumper List

The following table shows the function of each of the board's jumpers.

Label

Function

Note

JP1

Panel Power Selector

2x3 header, pitch 2.0mm

JP2

Backlight Power Selector

2x1 header, pitch 2.0mm

JP3

Panel Control Power Selector

2x1 header, pitch 2.0mm

JP4

Brightness Adjust Mode

Selector

2x1 header, pitch 2.0mm

JP5

Backlight Control Mode

Selector

2x1 header, pitch 2.0mm

SW2

Boot Mode Selector

N/A

2.2.1.1 Panel Power Selector(JP1)

2.2.1.2 Backlight Power Selector (JP2)

Setting

Function

1-2*

+3.3V

3-4

+5V

5-6

+12V

Setting

Function

1-2

+12V

2-3*

+5V

3.3V

12V

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 18 -

2.2.1.3 Panel Control Power Selector (JP3)

2.2.1.4 Brightness Adjust Mode Selector (JP4)

2.2.1.5 Backlight Control Mode Selector (JP5)

2.2.1.6 Boot Mode Selector (SW2)

Setting

Function

1-2

+5V

2-3*

+3.3V

Setting

Function

1-2

Adjust by VR Knob

2-3*

Adjust by Software

Setting

Function

1-2

2-3*

PWM

Setting

Function

PIN1

PIN2

PIN3

PIN4

Emmc Boot

Boot from MicroSD

Download by USB OTG

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 19 -

2.3 Connectors

This section lists all the connectors on the FA30-210 Motherboard and its pin

assignments.

Motherboard connectors:

Front Side

Label

Connector

Note

BT1

RTC Battery

1 x 2 DF13-2P, pitch 1.25mm

CN1

Reset

White,1 x4 wafer, pitch 1.0mm

CN2

Backlight Control VR

JST-B3B-PH-KL

CN3

CAN2

JST-BM04B-SRSS-TB

CN5

NFC

0.5mm 12p Connectors for FPC

CN6

LED

0.5mm 6p Connectors for FPC

CN7

Light Sensor Connector

0.5mm Pitch Connectors for FFC

CN8

Backlight 1(Vin or 5V)

1 x7 wafer pitch 2.0mm

CN9

DIDO Connector

Header 2x7pin, P: 2.0mm

CN11

Backlight 2

2 x 1 wafer pitch 2.0mm

CN12

Speaker Out Left

2 x 1 wafer, pitch 2.0mm

CN14

Speaker Out Right

2 x 1 wafer, pitch 2.0mm

CN15

Mini-PCIe

Foxconn, AS0B226-S68Q-7H

CN17

3.3V output

Blue, 2 x 1 wafer, pitch 2.0mm

CN20

5V output

Red, 2 x 1 wafer, pitch 2.0mm

CN23

12V output

Yellow, 2 x 1 wafer, pitch 2.0mm

CN27

COM Serial port (RS-232/422/485)

D-sub 9

CN28

CAN Bus

D-sub 9

CN30

Micro SD

CN33

DEBUG UART2 Connector

White, 1 x 6 wafer, pitch

1.0mm(Bottom side)

CN34 or

CN35

I2C Touch

0.5mm 10p Connectors for FPC

CN37

LVDS

40DP pitch1.25

CN38

USB5

White, 1 x4p wafer, pitch 1.0mm

CN39

USB4

White, 1 x4p wafer, pitch 1.0mm

CN40

USB1

White, 1 x4p wafer, pitch 1.0mm

CN41

USB3

White, 1 x4p wafer, pitch 1.0mm

CN43

UART4

White, 1 x8p wafer, pitch 1.0mm

CN44

TTL Panel

0.5mm Pitch Connectors For

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

- 20 -

FFC

CN45

Microphone

2 x 1 wafer, pitch 2.0mm

CN46

Terminal Block 2-pin

2-pin 3.5mm

CN47

UART5

White, 1 x8p wafer, pitch 1.0mm

CN48

USB 2.0 Type A

I2C Touch

0.5mm Pitch Connectors For

FFC

LAN1

RJ-45 with POE

RT5-1740K22A

Rear Side

Label

Connector

Note

CN32

USB OTG

CN33

Debug UART2

White, 1 x 6 wafer, pitch 1.0mm

HDMI 1

Micro HDMI

USB1

Mini USB for Debug

USB OTG

2.3.1 Front Side Setting Description

This section includes pin assignment of connectors located on the front side of the

FA30-200 Motherboard.

2.3.1.1 RTC Battery (BT1)

2.3.1.2 Reset (CN1)

Pin №

Signal Name

GND

BAT

Pin №

Signal Name

PM_SYSRST#

GND

PWRBTN_IN#

Page is loading ...

Winmate FA30-210 User manual

Brand: Winmate

Model: FA30-210

Type: User manual

Download PDF

report

Winmate FA30-210 User manual

Winmate FA30-210 User manual

Related papers

Other documents