Winmate iH70 User manual

IH70 Motherboard

Mini-ITX SBC with w/ Intel® 4th Generation Core i3/i5/i7 Processor,

VGA, LVDS, Dual Giga Ethernet, USB 3.0 and Mini-PCIe Interface

V110

User Manual

Version 1.1

Manual Number: 9171111I101K

IH70 Motherboard User Manual

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve

design and/or performance. We assume no responsibility or liability for the use of

the described product(s), conveys no license or title under any patent, copyright, or

masks work rights to these products, and makes no representations or warranties

that these products are free from patent, copyright, or mask work right infringement,

unless otherwise specified. Applications that are described in this manual are for

illustration purposes only. We make no representation or warranty that such

application will be suitable for the specified use without further testing or

modification.

Warranty

We warrant that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. (Standard is one year,

extended warranty will need to discuss with our sales representatives. If the

customer discovers a defect, we will, at its option, repair or replace the defective

product at no charge to the customer, provided it is returned during the warranty

period of one year, with transportation charges prepaid. The returned product must

be properly packaged in its original packaging to obtain warranty service.

If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth

digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W11Axxxxxxxx means October of year 2011.

IH70 Motherboard User Manual

iii

Packing List

Before using this Motherboard, please make sure that all the items listed below are

present in your package:

 IH70 SBC Motherboard

 User Manual & Driver CD

Optional Accessories:

 Power Cord

If any of these items are missing or damaged, contact your distributor or sales

representative immediately.

Customer Service

We provide a service guide as below for any problem by the following steps: First,

contact your distributor, sales representative, or our customer service center for

technical support if you need additional assistance. You need to prepare the

following information before you call:

 Product serial number

 Peripheral attachments

 Software (OS, version, application software, etc.)

 Detailed problem description

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day.

We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products. Please do not

hesitate to call or e-mail us.

IH70 Motherboard User Manual

iv

Safety Precautions

 Warning!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronic

personnel should open the PC chassis.

 Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

IH70 Motherboard User Manual

v

Safety and Warranty

1. Please read these safety instructions carefully.

2. Please keep this user- manual for later reference.

3. Please disconnect this equipment from any AC outlet before cleaning. Do not

use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or

letting it fall could cause damage.

7. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

8. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not used for a long time, disconnect it from the power

source to avoid damage by transient over-voltage.

11. If any of the following situations arises, get the equipment checked by service

personnel:

A. The power cord or plug is damaged.

B. Liquid has penetrated into the equipment.

C. The equipment has been exposed to moisture.

D. The equipment does not work well, or you cannot get it to work according

to the user’s manual.

E. The equipment has been dropped and damaged.

F. The equipment has obvious signs of breakage.

IH70 Motherboard User Manual

vi

Revision History

Manual

Version

Board

Version

Released

Date

Note

Author

1.0

V100

2014.10.7

Initial Draft

Patrick Hsien

1.1

V110

2015.12.30

Revised: BIOS Configuration,

Driver Installation,

Pin Assignment and Jumper

Setting

Austin,

edited by Anna

Kiseleva

IH70 Motherboard User Manual

vii

CONTENTS

PREFACE ………………………………………………………………………………………..II

CHAPTER 1 GENERAL INFORMATION ................................................... 2

1.1 INTRODUCTION ....................................................................................... 2

1.2 FEATURES .............................................................................................. 2

1.3 MOTHERBOARD SPECIFICATIONS ................................................................ 3

CHAPTER 2 HARDWARE INSTALLATION ................................................ 7

2.1 MEMORY MODULE (SO-DIMM) INSTALLATION ........................................... 7

2.2 I/O EQUIPMENT INSTALLATION .................................................................. 8

2.2.1 12V DC-IN ...................................................................................................... 8

2.2.2 Serial COM Ports ............................................................................................ 8

2.2.3 VGA ................................................................................................................ 8

2.2.4 Ethernet Interface .......................................................................................... 8

2.2.5 USB Ports ....................................................................................................... 8

2.2.6 Audio Function ............................................................................................... 9

2.3 JUMPERS AND CONNECTORS .................................................................... 10

2.3.1 Component Side ........................................................................................... 10

2.3.2 Solder Side ................................................................................................... 11

2.3.3 I/O Side ........................................................................................................ 12

2.4 JUMPER SETTINGS ................................................................................. 13

2.4.1 Jumper List ................................................................................................... 13

2.4.2 Setting Jumpers ........................................................................................... 14

2.5 CONNECTORS AND PIN ASSIGNMENT ........................................................... 17

2.5.1 Front Side Setting Description ...................................................................... 17

2.5.2 I/O Side ........................................................................................................ 32

CHAPTER 3 AMI BIOS SETUP .............................................................. 38

3.1 WHEN AND HOW TO USE BIOS SETUP ........................................................ 38

3.2 BIOS FUNCTIONS .................................................................................... 39

3.2.1 Main Menu .................................................................................................. 39

3.2.2 Advanced Menu ........................................................................................... 41

3.2.3 Chipset Menu ............................................................................................... 56

3.2.4 Boot Menu ................................................................................................... 63

3.2.5 Security Menu .............................................................................................. 65

3.2.6 Save & Exit ................................................................................................... 66

IH70 Motherboard User Manual

viii

3.3 USING RECOVERY WIZARD TO RESTORE COMPUTER ....................................... 68

CHAPTER 4 DRIVER INSTALLATION ..................................................... 71

4.1 INTEL CHIPSET DRIVER INSTALLATION........................................................... 71

4.2 GRAPHICS DRIVER INSTALLATION ................................................................ 73

4.3 AUDIO DRIVER INSTALLATION ..................................................................... 76

4.4 ETHERNET DRIVER INSTALLATION ................................................................ 78

4.5 INTEL® MANAGEMENT ENGINE SOFTWARE INSTALLATION ............................... 81

4.6 FINTEK COM PORT DRIVER INSTALLATION ................................................... 84

4.7 USB 3.0 DRIVER INSTALLATION (FOR WINDOWS 7) ....................................... 87

CHAPTER 5: TECHNICAL SUPPORT DOCUMENTS ................................. 92

5.1 DIGITAL I/O SDK .................................................................................... 92

5.2 WATCHDOG SDK ..................................................................................... 92

General Information

This chapter includes the IH70 SBC Motherboard

background information.

Sections include:

1.1 Introduction

1.2 Features

1.3 Motherboard Specifications

IH70 Motherboard User Manual

2

Chapter 1 General Information

1.1 Introduction

Thank you for choosing the IH SBC 70 motherboard. The motherboard is

integrated with Intel®QM87 chipset, 17x17mm, and Socket G3 Intel® 4th

Generation Core i7/i5/i3 Processor. The Intel®4th Generation Core™ processor

based on 64-bit, multi-core processors built on 22-nanometer process

technology. The processors are designed for a two-chip platform consisting of a

processor and Platform Controller Hub (PCH) to be used with the Mobile chipset.

IH70 is equipped with rich peripheral connectors: three Mini-PCIe I/O ports, two

Serial ATA III (6Gb/s)connectors, six serial ports (three connectors; three pin

headers), six super-speed USB 3.0 connectors (four connectors; two pin headers )

and four hi-speed USB 2.0 connectors(four pin headers). Additionally, IH70 SBC

features build-in a 12V DC-IN power adapter.

Thus, this model can be used in many applications in the industrial computer

market, such as Gaming, POS, KIOSK, Industrial Automation, and Programmable

Control System. Compact design and high performance meet the demanding

requirements of modern business and industrial applications.

1.2 Features

 Mini-ITX Form Factor ( 170mm x 170mm)

 Support Socket G3 Intel® 4

th

Generation Core i3/i5/i7 Processor

 System memory up to 16GB DDR3L 1333/1600, SO-DIMM

 Intel

®

QM87 Chipset

 Intel

®

HD Graphics 4600. Integrated Graphics Engine.

 Intel

®

I210IT Gigabit-LAN Controller + I218LM Gigabit-LAN PHY r

 3 x Mini PCIe, 6 x COM, 6 x USB3.0, 4 x USB 2.0 ,2 x SATAIII, 8 x GPIO ports,

1 x HDMI,1xeDP(By BOM Option),1 x PCIe x 16, 1 x LPT port

IH70 Motherboard User Manual

3

1.3 Motherboard Specifications

CPU Type

Intel® 4th Generation Core i3/i5/i7 Processor

Chipset

Intel® QM87

BIOS

AMI System BIOS

Graphic

Intel® HD Graphics 4600 support DX11, OGL4.0

LCD interface

Dual-channel 24 bit LVDS Up to 1440 x 900 @ 60Hz

Resolution

VGA mode: Up to 1920 x 1200 @ 60Hz

DVI: 1920 x 1200 @ 60Hz

HDMI:1920 x 1200 @ 60Hz

LVDS :1920 x 1200 @ 60Hz ; co-lay eDP(by BOM Option)

LAN

2 x Giga LAN (Intel® I210IT Gigabit-LAN Controller + I218LM

Gigabit-LAN PHY )

Memory Type

2 x SO-DIMM socket, supports up to 16GB DDR3L 1333/1600

Super I/O

Fintek F81867

Adio

Realtek ALC886 HD Audio Codec

USB

6 ports, USB 3.0 (4 x USB Connector, 2 x USB pin-header )

4 ports, USB 2.0 (4 x USB pin-header )

Edge Connectors

1 x DC-IN Jack (+12V)

1 x VGA out connector

2 x Gigabit LAN RJ-45

1 x RS232/422/485

2 x RS232

4 x USB 3.0 connector

2 x PS2

1 x Audio Jack(Line in, Line out, Mic in)

On Board

Pin-Header

Connectors

3 x RS-232 (COM2.COM5.COM6) 2x5 pin-header

4 x USB 2.0

2 x USB3.0

1 x DVI/HDMI by DF-13 20-pin connector

1 x LVDS by DF-13 40-pin connector

1 x eDP by DF-13 20-pin connector(Optional)

2 x SATA III

1 x 2x4-pin wafer for SATA power

2 x 2-pin pin-header for speaker (with Amplifier): Left, Right

1 x 10-pin pin-header for DIO

1 x 3-pin digital panel backlight brightness controller

1 x 7-pin inverter

1 x 2x2-pin DC-in 12V connector

1 x 10-pin wafer for Front Panel(2x5)

2 x 2-pin wafer for +5V external power (Red)

1 x 2-pin wafer for 12V external power (Yellow)

1 x 3-pin pin-header for CPU Fan (smart fan)

1 x 20-pin box header for LPT Port

1 x 6-pin wafer for external SIM Card daughter board

Power Connector

Input: 4-pin power-input connector

Expansion Slots

3 x Mini PCIe slot

1 x PCIe x 16 slot

Form Factor

Mini-ITX

Dimensions

170mm x 170mm

Mechanical &

Environmental

Operating temperature: 0°C to 60°C

Shock: Operating 15G, 11ms duration

Vibration: Operating 5 Hz~500Hz / 1Grms / 3 Axis

Certification: CE, FCC, RoHS

IH70 Motherboard User Manual

4

Function block (V100)

IH70 Motherboard User Manual

5

Board dimensions (V100)

IH70 Motherboard User Manual

6

Hardware Installation

This chapter provides information on how to use

jumpers and connectors on the IH 70 SBC

Motherboard. Be cautious while working with

these modules. Please carefully read the content

of this chapter in order to avoid any damages.

The sections include:

2.1 Memory Module Installation

2.2 I / O Equipment Installation

2.3 Jumpers and Connectors

2.4 Jumper Settings

2.5 Connectors and Pin Assignment

IH70 Motherboard User Manual

7

Chapter 2 Hardware Installation

2.1 Memory Module (SO-DIMM) Installation

The IH70 SBC Motherboard has two 204-pin SODIMM slot. The socket supports up to

8GB DDR3L 1333/1600 SDRAM. When installing the –memory unit, please follow the

steps below:

Steps 1 Firmly insert the SO-DIMM at an angle of about 30-degree into the slot. Align

the SO-DIMM with the slot until it is fully inserted. The notch on the SO-DIMM

should match the break on the slot.

Step 2 Press downwards on SO-DIMM until the retaining clips at both ends fully snap

closed and the SO-DIMM is properly seated.

.

The SO-DIMM only fits in one correct orientation. It will cause

permanent damage to the development board and the SO-DIMM if

the SO-DIMM is forced into the slot at the incorrect orientation.

IH70 Motherboard User Manual

8

2.2 I/O Equipment Installation

2.2.1 12V DC-IN

The IH 70 SBC Motherboard allows plugging 12V DC-IN jack on the board without

another power module converter under power consumption by Intel® 4th

Generation Core i7/i5/i3 Processor and QM87 chipset.

2.2.2 Serial COM Ports

Three RS-232 connectors build in the rear I/O. One optional COM ports support

RS-422/485. When an optional touch-screen is ordered with PPC, serial com port can

connect to a serial or an optional touch-screen

2.2.3 VGA

The Motherboard has one VGA port that can be connected to an external CRT/ LCD

monitor. Use VGA cable to connect to an external CRT / LCD monitor, and connect the

power cable to the outlet. The VGA connector is a standard 15-pin D-SUB connector.

2.2.4 Ethernet Interface

The Motherboard is equipped with Intel® 82574L Gigabit-LAN Controller + I218LM

Gigabit-LAN PHY which is fully compliant with the PCI 10/100/1000 Mbps Ethernet

protocol compatible. It is supported by major network operating systems. The

Ethernet ports provide two standard RJ-45 jacks.

2.2.5 USB Ports

Eight USB devices (four with pin headers) may be connected to the system though an

adapter cable. Various adapters may come with USB ports. USB usually connect the

external system to the system. The USB ports support hot plug-in connection.

Whatever, you should install the device driver before you use the device.

IH70 Motherboard User Manual

9

2.2.6 Audio Function

The Audio 7.1 channel capabilities are provided by a Realtek ALC886 chipset

supporting digital audio outputs. The audio interface includes three jacks: line-in,

line-out and mic in.

IH70 Motherboard User Manual

10

2.3 Jumpers and Connectors

2.3.1 Component Side

SW1

USB 2.0

Mini-PCIE

Half Card

IH70 Motherboard User Manual

11

2.3.2 Solder Side

IH70 Motherboard User Manual

12

2.3.3 I/O Side

Page is loading ...

Winmate iH70 User manual

Winmate iH70 User manual

Related papers

Other documents