Winmate FA30-200 User manual

FA30-200 Motherboard

3.5” SBC with Freescale® iMX6 Dual Core Processor

V100

User Manual

Version 1.0

FA30-200 MOTHERBOARD

II

PREFACE

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s),

conveys no license or title under any patent, copyright, or masks work rights to these

products, and makes no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or warranty that such application will be suitable for the specified use

without further testing or modification.

Warranty

We warrant that each of its products will be free from material and workmanship defects for

a period of one year from the invoice date. (Standard is one year, extended warranty will

need to discuss with our sales representatives. If the customer discovers a defect, we will, at

its option, repair or replace the defective product at no charge to the customer, provided it

is returned during the warranty period of one year, with transportation charges prepaid. The

returned product must be properly packaged in its original packaging to obtain warranty

service.

If the serial number and the product shipping data differ by over 30 days, the in-warranty

service will be made according to the shipping date. In the serial numbers the third and

fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of year 2016.

FA30-200 MOTHERBOARD

III

Customer Service

We provide a service guide as below for any problem by the following steps: First, contact

your distributor, sales representative, or our customer service center for technical support if

you need additional assistance. You need to prepare the following information before you

call:

 Product serial number

 Peripheral attachments

 Software (OS, version, application software, etc.)

 Detailed problem description

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products. Please do not hesitate to call or e-mail us.

FA30-200 MOTHERBOARD

IV

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information

or to alert you to the potential for hardware damage or personal injury. These are Notes,

Important, Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION

A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

WARNING!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

FA30-200 MOTHERBOARD

V

Safety Precautions

CAUTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Safety and Warranty

1. Please read these safety instructions carefully.

2. Please keep this user manual for later reference.

3. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid

or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the equipment and

must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

7. Make sure the voltage of the power source is correct before connecting the equipment

to the power outlet.

8. Position the power cord so that people cannot step on it. Do not place anything over

the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

11. If any of the following situations arises, get the equipment checked by service

personnel:

A. The power cord or plug is damaged.

B. Liquid has penetrated into the equipment.

C. The equipment has been exposed to moisture.

D. The equipment does not work well, or you cannot get it to work according to the

user’s manual.

E. The equipment has been dropped and damaged.

F. The equipment has obvious signs of breakage.

FA30-200 MOTHERBOARD

VI

ABOUT THIS USER MANUAL

This User Manual provides information about the FA30-200 Motherboard.

NOTE

Some pictures in this guide are samples and can differ from actual product.

Chapter Descriptions

Chapter 1, General Information provides general information about the FA30-200

Motherboard including layout, mechanical dimensions and product specifications.

Chapter 2, Hardware Installation provides information on motherboard components, jumper

settings and connector pin assignment of the FA30-200 Motherboard.

Chapter 3, Software Programming Guide provides instructions on software installation for all

supported operating systems.

Chapter 4, Technical Support provides the directory to technical support for FA30-200

Motherboard.

Document Revision History

Version

Date

Note

1.0

8-Feb-2017

Initial document release

CONTENTS

PREFACE ............................................................................................................................................................ I

ABOUT THIS USER MANUAL ........................................................................................................................... VI

CHAPTER 1: GENERAL INFORMATION .............................................................................................................. 1

1.1 INTRODUCTION ................................................................................................................................................. 1

1.2 FEATURES ........................................................................................................................................................ 1

1.3 PACKING CONTENTS ........................................................................................................................................... 2

1.4 MOTHERBOARD SPECIFICATIONS .......................................................................................................................... 3

1.5 FUNCTIONAL DESCRIPTION .................................................................................................................................. 4

1.6 PHYSICAL DESCRIPTION ...................................................................................................................................... 5

CHAPTER 2: HARDWARE INSTALLATION ........................................................................................................... 7

2.1 MOTHERBOARD COMPONENTS ............................................................................................................................ 7

2.1.1 Component Side ................................................................................................................................... 7

2.1.2 Soldier Side ........................................................................................................................................... 8

2.1.3 I/O Side ................................................................................................................................................. 8

2.2.1 JUMPERS ...................................................................................................................................................... 9

2.2.1 Jumper List ......................................................................................................................................... 10

2.2.1.1 SW2: Boot Mode Selector ............................................................................................................................ 10

2.3 CONNECTORS ................................................................................................................................................. 10

2.3.1 Front Side Setting Description ............................................................................................................ 11

2.3.1.1 BT1: RTC Battery ........................................................................................................................................... 11

2.3.1.2 CN7: Light Sensor Connector........................................................................................................................ 11

2.3.1.3 CN9: DIDO Connector ................................................................................................................................... 11

2.3.1.4 CN12: R- Speaker Out ................................................................................................................................... 12

2.3.1.5 CN14: L- Speaker Out ................................................................................................................................... 12

2.3.1.6 CN17: 3.3V output ........................................................................................................................................ 12

2.3.1.7 CN20: 5V output ........................................................................................................................................... 12

2.3.1.8 CN23: 12V output ......................................................................................................................................... 12

2.3.1.9 CN41: Touch ................................................................................................................................................. 13

2.3.1.10 CN44: TTL Panel ......................................................................................................................................... 13

2.3.1.11 CN45: Mic Connector ................................................................................................................................. 13

2.3.1.12 J5: I2C Touch Connector ............................................................................................................................. 14

2.3.1.13 PANEL: LVDS Connector .............................................................................................................................. 14

2.3.2 I/O Description ................................................................................................................................... 15

FA30-200 MOTHERBOARD

II

2.3.2.1 DC IN: Terminal Block Connector ................................................................................................................. 15

2.3.2.2 CN48: USB 2.0 Connector ............................................................................................................................. 15

2.3.2.3 CN27: Serial Port Connector ......................................................................................................................... 15

2.3.2.4 CN28: CAN BUS Connector ........................................................................................................................... 16

2.3.2.5 LAN1: RJ45 with POE .................................................................................................................................... 16

2.3.2.6 CN30: Micro SD ............................................................................................................................................ 16

2.3.2.7 CN32: USB OTG Host .................................................................................................................................... 17

2.3.2.8 USB1: Mini USB Connector (Debug) ............................................................................................................. 17

2.4 CONFIGURING SERIAL PORT SETTINGS IN ANDROID OS ........................................................................................... 18

CHAPTER 3: SOFTWARE PROGRAMMING GUIDE ............................................................................................ 21

3.1 ANDROID PROGRAMMING GUIDE ....................................................................................................................... 21

3.1.1 ADB Installation .................................................................................................................................. 21

3.1.2 GPIO ................................................................................................................................................... 22

3.1.3 CAN BUS ............................................................................................................................................. 22

3.1.4 UART Sample Code ............................................................................................................................. 22

3.1.5 OTA Update Guide .............................................................................................................................. 23

3.2 LINUX AND UBUNTU PROGRAMMING GUIDE ........................................................................................................ 26

3.2.1 GPIO ................................................................................................................................................... 26

3.2.2 CAN BUS ............................................................................................................................................. 26

3.2.3 UART Switch ....................................................................................................................................... 26

CHAPTER 4: TECHNICAL SUPPORT .................................................................................................................. 28

USER MANUAL CHAPTER 1 GENERAL INFORMATION

FA30-200 MOTHERBOARD

1

General Information

This chapter includes the FA30-200

Motherboard background information.

Sections include:

1.1 Introduction

1.2 Features

1.3 Packing Contents

1.4 Motherboard Specifications

1.5 Functional Description

1.6 Physical Description

USER MANUAL CHAPTER 1 GENERAL INFORMATION

FA30-200 MOTHERBOARD

1

CHAPTER 1: GENERAL INFORMATION

This chapter includes the FA30-200 Motherboard background information.

1.1 Introduction

Thank you for choosing the FA30-200 Motherboard. This motherboard is an integrated

package that provides a complete RISC platform for project evaluation, application

development and solution feasibility testing that decreases lead-time and lowers initial

cost and investment.

FA30-200 Motherboard empowered by a Freescale® Cortex™ – A9 iMX6 Dual Core 1 GHz

processor. In peripheral connectivity, FA30-200 SBC features serial port connector, CAN

BUS connector, USB 2.0 A-type connector, LAN port with PoE function support, Micro

HDMI, Debug port, and one Micro SD card slot.

1.2 Features

FA30-200 Motherboard has the following features:

 146 mm x 91.6 mm (3.5” Form Factor)

 Freescale Cortex™ – A9 iMX6 Dual Core 1 GHz processor

 Supports Android 4.4/ Linux Kernel 3.0.35, QT 5.4 Browser/ Ubuntu 16.04

 One MicroSD/ SDHC card slot

 Built-in 16GB eMMC

 Supports Power Over Ethernet (PoE)

USER MANUAL CHAPTER 1 GENERAL INFORMATION

FA30-200 MOTHERBOARD

2

1.3 Packing Contents

Inspect the equipment for damage. If any equipment is missing or damaged, contact us.

Standard packing list includes:

Motherboard

User Manual (Hardcopy)

Driver CD

* Pictures are for reference only and can differ from actual product.

** The packing contents may vary according to your order.

*** If you need to purchase the optional accessories or request part numbers, please contact

our sales representatives.

USER MANUAL CHAPTER 1 GENERAL INFORMATION

FA30-200 MOTHERBOARD

3

1.4 Motherboard Specifications

Model Name

FA30-200

System

Specifications

CPU

Freescale® Cortex™ A9 iMX6 Dual Core

System Memory

1GB DDR3

Storage

On board 16GB eMMC/mSATA

Expansion Slot

1 x MicroSD/ SDHC Card Slot

OS

Android 4.4 (Default)

Linux 3.0.35 QT 5.4 (Optional)

Ubuntu 16.04 (Optional)

I/O Interface

External I/O

1 x Terminal Block 2-pin (DC in)

1 x USB A-type (Host)

1 x RS232/ 422/ 485 selectable via software

1 x CAN BUS

1 x RJ-45 10/100/1000 (Support PoE function)

1 x USB OTG

1 x Mini USB (for debug)

Internal I/O

1 x LVDS by pin-header

1 x I2C Touch by pin-header

2 x USB by 2 pin-header (4 pin)

1 x Digital I/O with 3.3V (8-pin GPIO)

Power

Requirements

Power Input

DC IN 9~24V

Power Consumption

3W

Physical

Characteristics

Dimensions

(W x H x D)

146 mm x 91.6 mm (3.5" Form Factor)

Environment

Operating Temperature

-20 deg. C to +60 deg. C

Storage Temperature

-40 deg. C to +70 deg. C

Operating Humidity

10% to 95% (non-condensing, RH)

USER MANUAL CHAPTER 1 GENERAL INFORMATION

FA30-200 MOTHERBOARD

4

1.5 Functional Description

FA30-200 Function Block (V200)

USER MANUAL CHAPTER 1 GENERAL INFORMATION

FA30-200 MOTHERBOARD

5

1.6 Physical Description

FA30-200 Board Dimensions (V200)

Unit: mm

FA30-200 MOTHERBOARD

6

Hardware Installation

This chapter introduces the setup procedures of the

FA30-200 motherboard, including instructions on

how to connect jumpers and peripherals, and

mechanical drawings.

Sections include:

2.1 Motherboard Components

2.2 Jumpers

2.3 Connectors

2.4 Configuring Serial Port Settings

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

FA30-200 MOTHERBOARD

7

CHAPTER 2: HARDWARE INSTALLATION

This chapter introduces the setup procedures of the FA30-200 platform, including

instructions on how to connect jumpers and peripherals, and mechanical drawings.

Carefully read the content of this chapter in order to avoid any damages.

2.1 Motherboard Components

This section explains the location of the components on the FA30-200 motherboard.

2.1.1 Component Side

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

FA30-200 MOTHERBOARD

8

2.1.2 Soldier Side

2.1.3 I/O Side

SW1

USB 2.0

Mini-PCIE

Half Card

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

FA30-200 MOTHERBOARD

9

2.2.1 Jumpers

This section explains how to set jumpers for correct configuration of the motherboard. A

metal-bridge jumper used to close an electric circuit, and it usually consists of two metal

pins and one small clip protected by a plastic cover that slides over the pins to connect

them. Users can connect the pins with the clip to close a jumper, and remove the clip to

open a jumper. Generally, a jumper will have three pins which labeled 1, 2, and 3. In this

case, you would connect either pins 1 and 2, or 2 and 3.

The jumper setting diagram is shown below. When the jumper cap is placed on both pins,

the jumper is SHORT. The illustration below shows a 3-pin jumper; pins 1 and 2 are short. If

you remove the jumper cap, the jumper is OPEN.

PIN 1-2 SHORT

NOTE:

A pair of needle nose pliers may be helpful when working with jumpers. If you

have any doubts about the best hardware configuration for your application,

contact your local distributor or sales representative before you make any

changes. Generally, you simply need a standard cable to make most

connections.

1

2

3

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

FA30-200 MOTHERBOARD

10

2.2.1 Jumper List

The following table shows the function of each of the board's jumpers.

Label

Function

Note

SW2

Boot Mode Selector

N/A

2.2.1.1 SW2: Boot Mode Selector

2.3 Connectors

This section lists all the connectors on the FA30-200 Motherboard and its pin assignments.

Motherboard connectors:

Front Side

Label

Connector

Note

BT1

RTC Battery

1 x 2 DF13-2P, pitch 2.0mm

CN7

Light Sensor Connector

0.5mm Pitch Connectors For FFC

CN9

DIDO Connector

Header 2x7pin, P: 2.0mm

CN12

R-Speaker Out

2 x 1 wafer, pitch 2.0mm

CN14

L-Speaker Out

2 x 1 wafer, pitch 2.0mm

CN17

3.3V output

2 x 1 wafer, pitch 2.0mm

CN20

5V output

2 x 1 wafer, pitch 2.0mm

CN23

12V output

2 x 1 wafer, pitch 2.0mm

CN41

Touch

1x6 wafer, pitch 2.0mm

CN44

TTL Panel

0.5mm Pitch Connectors For FFC

CN45

Microphone

2 x 1 wafer, pitch 2.0mm

J5

I2C Touch

0.5mm Pitch Connectors For FFC

PANEL

LVDS

2x20 wafer, pitch 2.5mm

I/O Side

Setting

Function

PIN1

PIN2

0

Boot from fuses (default)

0

1

1 Serial downloader

1

0

Boot from board settings

1

Reserved

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION

FA30-200 MOTHERBOARD

11

Label

Connector

Note

TRML Block

Terminal Block (2-pin)

2-pin 3.5mm

CN48

USB 2.0 Type A

CN27

COM Serial port

(RS-232/422/485)

D-sub 9

CN28

CAN BUS

D-sub 9

LAN1

RJ-45 with POE

RT5-1740K22A

CN32

USB OTG

USB1

Mini USB for Debug

USB OTG

CN30

Micro SD

2.3.1 Front Side Setting Description

This section includes pin assignment of connectors located on the front side of the

FA30-200 Motherboard.

2.3.1.1 BT1: RTC Battery

2.3.1.2 CN7: Light Sensor Connector

2.3.1.3 CN9: DIDO Connector

Pin №

Signal Name

1

GND

2

+3.3V

Pin №

Signal Name

Pin №

Signal Name

1

+5V

2

NC

3

LED_B

4

Light _ PWR

5

LED_R

6

LED_G

7

GND

8

LS_DATA

9

LS_CLK

10

GND

11

NC

12

INT

Pin №

Signal Name

Pin №

Signal Name

1

GND

2

DIO +5V

Page is loading ...

Winmate FA30-200 User manual

Winmate FA30-200 User manual

Related papers

Other documents