Page is loading ...
IB32 Motherboard
3.5” SBC with Intel ® Bay Trail Processors, HDMI, LVDS, VGA, Dual
Giga Ethernet, and Mini-PCIe Interface
V110
User Manual
Version 1.6
Manual Number: 9171111I101Y
User Manual Chapter 1 General Information
ii
User Manual
Preface
This product can be used only in industrial-grade computers.
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve
design and/or performance. We assume no responsibility or liability for the use of
the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties
that these products are free from patent, copyright, or mask work right infringement,
unless otherwise specified. Applications that are described in this manual are for
illustration purposes only. We make no representation or warranty that such
application will be suitable for the specified use without further testing or
modification.
Warranty
We warrant that each of its products will be free from material and workmanship
defects for a period of one year from the invoice date. (Standard is one year,
extended warranty will need to discuss with our sales representatives. If the
customer discovers a defect, we will, at its option, repair or replace the defective
product at no charge to the customer, provided it is returned during the warranty
period of one year, with transportation charges prepaid. The returned product must
be properly packaged in its original packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth
digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.
User Manual Chapter 1 General Information
iii
User Manual
Packing List
Before using this Motherboard, please make sure that all the items listed below are
present in your package:
IB32 Motherboard
User Manual & Driver CD
Optional Accessories:
AC to DC 12V Power Adapter
Power Cord
If any of these items are missing or damaged, contact your distributor or sales
representative immediately.
Customer Service
We provide a service guide as below for any problem by the following steps: First,
contact your distributor, sales representative, or our customer service center for
technical support if you need additional assistance. You need to prepare the
following information before you call:
Product serial number
Peripheral attachments
Software (OS, version, application software, etc.)
Detailed problem description
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day.
We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products. Please do not
hesitate to call or e-mail us.
User Manual Chapter 1 General Information
iv
User Manual
Advisory Conventions
Three types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an example of
each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to
know.
CAUTION
A Caution alert indicates potential damage to hardware and explains
how to avoid the potential problem.
WARNING!
An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
User Manual Chapter 1 General Information
v
User Manual
Safety Precautions
WARNING!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while
the power is on. Sensitive electronic components can be damaged by
sudden power surges. Only experienced electronic personnel should
open the PC chassis.
CAUTION
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or
static-shielded bag when they are not in the chassis.
User Manual Chapter 1 General Information
vi
User Manual
Safety and Warranty
1. Please read these safety instructions carefully.
2. Please keep this user- manual for later reference.
3. Please disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or
letting it fall could cause damage.
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
8. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
11. If any of the following situations arises, get the equipment checked by service
personnel:
A. The power cord or plug is damaged.
B. Liquid has penetrated into the equipment.
C. The equipment has been exposed to moisture.
D. The equipment does not work well, or you cannot get it to work according
to the user’s manual.
E. The equipment has been dropped and damaged.
F. The equipment has obvious signs of breakage.
User Manual Chapter 1 General Information
vii
User Manual
Revision History
Manual
Version
Board
Version
Released
Date
Note
Author
1.0
V100
6-Mar-2014
Initial Draft
Marc Tsai
1.1
V100
15-Aug-2014
Add Recovery Guide
Jimmy Chen
1.2
V100
1-Oct-2014
Add OS Selection
Jimmy Chen
1.3
V110
8-May-2015
Add USB 3.0 Driver Installation
Jimmy Chen
1.4
V110
26-Oct-2015
Adjust format
Tom Huang
1.5
V110
15-Dec-2015
- Correct CPU Frequency
(1.83MHz);
- Correct PIN Assignment:
JP10, CON1, CON3, DCJACK2,
Panel1, SIM1, SSD1, VGA1,
DCJACK1, HDMI;
-Adjust format
Jimmy Chen
1.6
V110
7-Jul-2016
Added Appendix A “Watchdog
Utility Reference”
Austin
Chang
User Manual Chapter 1 General Information
viii
User Manual
CONTENTS
PREFACE ……………………………………………………………………………………….II
CHAPTER 1 GENERAL INFORMATION ERROR! BOOKMARK NOT DEFINED.
1.1 INTRODUCTION ....................................................................................... 1
1.2 FEATURES .............................................................................................. 1
1.3 MOTHERBOARD SPECIFICATIONS ................................................................ 2
1.3.1 Hardware and Software Description .............................................................. 2
1.3.2 Function block (V110) .................................................................................... 4
1.3.3 Board dimensions (V110) ............................................................................... 5
CHAPTER 2 HARDWARE INSTALLATION ................................................ 8
2.1 MEMORY MODULE (SO-DIMM) INSTALLATION ........................................... 8
2.2.1 12V DC-IN ...................................................................................................... 9
2.2.2 Serial COM ports ............................................................................................ 9
2.2.3 External HDMI................................................................................................ 9
2.2.4 Ethernet interface .......................................................................................... 9
2.2.5 USB ports ....................................................................................................... 9
2.2.6 Audio function ............................................................................................. 10
2.2 JUMPERS AND CONNECTORS .................................................................... 11
2.3.1 Component Side ........................................................................................... 11
2.3.2 Solder Side ................................................................................................... 12
2.3.3 I/O Side ........................................................................................................ 12
2.3 JUMPER SETTINGS ................................................................................. 14
2.4.1 Jumper List ................................................................................................... 14
2.4.2 Setting Jumpers............................................................................................ 15
2.5 CONNECTORS AND PIN ASSIGNMENT ........................................................... 18
2.5.1 Front Side Setting Description ...................................................................... 18
2.5.2 I/O Side Setting Description ......................................................................... 33
CHAPTER 3 AMI BIOS SETUP .............................................................. 37
3.1 WHEN AND HOW TO USE BIOS SETUP ........................................................ 37
3.2 BIOS FUNCTIONS .................................................................................... 38
3.2.1 Main Menu .................................................................................................. 38
3.2.2 Advanced Menu ........................................................................................... 39
3.2.3 Chipset Menu ............................................................................................... 58
3.2.4 Security Menu .............................................................................................. 59
3.2.5 Boot Configuration ....................................................................................... 60
User Manual Chapter 1 General Information
ix
User Manual
3.2.6 Save & Exit ................................................................................................... 62
3.3 USING RECOVERY WIZARD TO RESTORE COMPUTER ....................................... 64
CHAPTER 4 DRIVER INSTALLATION ..................................................... 67
4.1 INTEL CHIPSET DRIVER .............................................................................. 67
4.2 GRAPHICS DRIVER ................................................................................... 71
4.3 AUDIO DRIVER ........................................................................................ 76
4.4 INTEL SIDEBAND FABRIC DEVICE (INTEL MBI) DRIVER (WINDOWS 8) ................ 79
4.5 INTEL TRUSTED ENGINE INTERFACE (INTEL TXE) DRIVER INSTALLATION .............. 82
4.6 USB 3.0 DRIVER (WINDOWS 7) ................................................................ 85
CHAPTER 5: TECHNICAL SUPPORT DOCUMENTS ................................. 90
5.1 DIGITAL I/O SDK .................................................................................... 90
5.2 WATCHDOG SDK ..................................................................................... 90
General Information
This chapter includes the IB32 Motherboard background
information.
Sections include:
1.1 Introduction
1.2 Features
1.3 Motherboard Specifications
User Manual Chapter 1 General Information
1.1 Introduction
Thank you for choosing the IB 32 motherboard. This motherboard is integrated with
Intel® Celeron® Bay Trail-M N2930 1.83GHz which offers a high performance
computing platform with low power consumption. The new motherboard supports
204-pin SO-DIMM DDR3L at speeds of 1333/1600 MHz, up to 8GB.
There is an advanced full set of I/O ports including one USB 3.0, five USB 2.0, two
LAN ports and audio jack for microphone, line-in and line-out. The motherboard is
designed in 3.5” form factor and measures 146mm x 102mm.
1.2 Features
3.5” Form Factor (146mm x 102mm / 5.7 x 4 inches)
Supports Intel® Celeron® Bay Trail-M N2930
System memory up to 8GB DDR3L 1333/1600, SO-DIMM
Intel
®
HD Graphics 4400 Integrated Graphics Engine
2 x Giga LAN (Intel
®
WG82574L GbE)
2 x Mini PCIe, 4 x COM, 1 x USB3.0, 5 x USB 2.0 ,1 x SATAII, 1 x 12 bit GPIO
port, 1 x HDMI,1xVGA
User Manual Chapter 1 General Information
2
1.3 Motherboard Specifications
1.3.1 Hardware and Software Description
Hardware:
System
Specifications
Processor
Intel® Celeron® Bay Trail-M N2930 1.83GHz
(2M Cache, up to 2.00 GHz)
System Memory
DDR3L 1066 MHz SO-DIMM Slot, Max. 8GB
Chipset
Intel ATOM SoC Integrated
Super IO Chipset
Fintek F81866
BIOS
AMI 64Mbit Flash
Display
Specification
Graphic
Intel
®
HD Graphics Engine
LCD Interface
Dual-channel18/24bit LVDS Up to1920x1080@ 60Hz
Graphic Resolution
VGA Mode: Up to 1600 x 1200 @ 60Hz
HDMI : 1920 x 1080 @ 60Hz
Audio
Codec
Realtek ALC886 HD Audio Codec
Audio Interface
Line-in, Line-out, Mic in
Ethernet
LAN
2 x Giga LAN (Intel
®
WG82574L GbE)
Ethernet Interface
1000 Base-Tx Gigabit Ethernet Compatible
I/O
Connectons
Rear I/O
2 x RJ-45
1 x HDMI
1 x USB 3.0, 1 x USB 2.0
1 x RS232 / 422 / 485
1 x DC-in Power Jack (+12V)
Internal I/O
3 x RS-232 / 10-pin(2x5)
4 x USB 2.0 / 8-pin(2x4)
1 x LVDS / 40-pin(2x20) DF-13 connector
1 x SATA II
1 x SATA Power
1 x Digital I/O(12-bit GPIO) / 14-pin(2x7)
1 x Power-input / 2-pin
1 x +12V for external power(Yellow) / 2-pin
1 x +5V for external power(Red) / 2-pin
1 x +3.3V for external power(Blue) / 2-pin
1 x Fan / 3-pin
1 x Panel inverter / 7-pin
1 x Front panel / 10-pin(2x5)
1 x Backlight brightness controller / 3-pin
2 x Speaker with Amp. / 2-pin
1 x VGA / 10-pin(2x5)
1 x 1394b / 10-pin(2x5)
1 x Audio (Mic-in / Line-in / Line-out) / 12-pin(2x6)
1 x Battery / 2-pin
Expansion Slot
1 x Mini PCIe slot (for USB 2.0 wireless module)
1 x Mini PCIe slot (for SATA II SSD)
Mechanical
Specifications
Dimensions (L x W)
146mm x 102mm
Form Factor
3.5 inch
Environmental
Considerations
Operating Temp.
-20 deg.C to 60 deg.C
Storage Temp.
-40 deg.C to 70 deg.C
Humidity
10~95% RH@400C, non-condensing
Power
Management
Power Requirement
12V DC-IN Power Jack
User Manual Chapter 1 General Information
3
Software Support:
Drivers
Intel Chipset Driver
Graphics Driver
Audio Driver
Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8)
Intel Trusted Engine Interface (Intel TXE) Driver
USB 3.0 Driver (Windows 7)
SDK
Digital I/O
Watchdog
User Manual Chapter 1 General Information
4
1.3.2 Function block (V110)
User Manual Chapter 1 General Information
5
1.3.3 Board dimensions (V110)
User Manual Chapter 1 General Information
6
AC to DC Power Adapter Components (optional)
AC to DC 12V Power
Adapter
Power Cord
The Motherboard allows plugging in 12V DC-IN jack on the board without another
power module converter under Intel
®
Bay Trail-M Celeron N2930 processor power
consumption.
7
Hardware Installation
This chapter provides information on how to use
jumpers and connectors on the IB32 Motherboard.
Be cautious while working with these modules.
Please carefully read the content of this chapter
in order to avoid any damages.
The sections include:
2.1 Memory Module Installation
2.2 I / O Equipment Installation
2.3 Jumpers and Connectors
2.4 Jumper Settings
2.5 Connectors and Pin Assignment
User Manual Chapter 2 Hardware Installation
8
Chapter 2 Hardware Installation
2.1 Memory Module (SO-DIMM) Installation
The IB32 Motherboard has two 204-pin SODIMM slot. The socket supports up to 8GB
DDR3L 1333/1600 SDRAM. When installing the –memory unit, please follow the steps
below:
Steps 1 Firmly insert the SO-DIMM at an angle of about 30-degree into the slot. Align
the SO-DIMM with the slot until it is fully inserted. The notch on the SO-DIMM
should match the break on the slot.
Step 2 Press downwards on SO-DIMM until the retaining clips at both ends fully snap
closed and the SO-DIMM is properly seated.
CAUTION
The SO-DIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SO-DIMM if the
SO-DIMM is forced into the slot at the incorrect orientation.
User Manual Chapter 2 Hardware Installation
9
I/O Equipment Installation
2.2.1 12V DC-IN
The Motherboard allows plugging in 12V DC-IN jack on the board without another
power module converter under power consumption by Intel® Celeron® Bay Trail-M
N2930 1.83GHz
2.2.2 Serial COM ports
Three RS-232 connectors build-in the rear I/O. One optional COM port supports
RS-422/485. When an optional touch-screen is ordered with PPC, serial COM port can
be connected to a serial or an optional touch-screen.
2.2.3 External HDMI
The Motherboard has one HDMI port that can be connected to an external LCD
monitor by HDMI cable, and it also needs to be connected to the outlet by power
cable. The HDMI connector is a standard 19-pin Type A connector.
2.2.4 Ethernet interface
The Motherboard is equipped with Intel® 82574L Gigabit-LAN Controller + I218LM
Gigabit-LAN PHY which is fully compliant with the PCI 10/100/1000 Mbps Ethernet
protocol compatible. It is supported by major network operating systems. The
Ethernet ports provide two standard RJ-45 jacks.
2.2.5 USB ports
Six USB devices (four with pin headers) can be connected to the system through an
adapter cable. You should install the device driver before you use the device. Various
adapters may come with USB ports. USB usually connected the external system. The
USB ports support hot plug-in connection.
User Manual Chapter 2 Hardware Installation
10
2.2.6 Audio function
The Audio 7.1 channel capabilities are provided by a Realtek ALC886 chipset
supporting digital audio outputs. The audio interface includes three jacks: line-in,
line-out and mic-in.
/
