Whirlpool WBC 3534 A+NFCX Program Chart

WBC 3534 A+NFCX
Whirlpool
Brand
Whirlpool
Model
WBC 3534 A+NFCX
Category
Fridge-freezers
Type
Program Chart

This manual is also suitable for

A. Refrigerator Compartment
2. Lighting
3. Shelves / Shelf area
4. Multi-flow cold air system
5. Cooler compartment
6. Rating plate with commercial name
8. Crisper divider
9. Reversibility kit
10. Egg tray
11. Separator
12. Door trays
B. Freezer Compartment
13. Storage baskets for frozen food items
14. Shelves
15. Middle basket (freezing zone)
16. Ice tray and/or cold accumulator
18. The freezer door trays for pizza or other frozen products with a
short storage time
Depending on the model the number and type of accessories may vary.
The freezer compartment can be used without baskets and without upper
shelf to increase storage for large products.
Place the food products directly on the shelf.
After inserting food, ensure that the freezer compartment door closes
properly.
C. Control panel
Anti-bacterial protection:
1. Filter in fan (depending on the model)
7. Crisper with antibacterial additives (depending on the model)
17. Door seals
The crisper and the door seals are manufactured from materials that
inhibit bacterial growth.
Notes
- In case of power failure the cold accumulator helps to keep
optimal storage temperature longer.
- All shelves and door trays are removable.
- The internal temperatures of the appliance depend on the
ambient temperature, frequency of opening the doors, as well as
location of the appliance. Temperature setting must consider these
factors.
- The appliance accessories are not suitable for washing in
dishwasher.
HOW TO START THE APPLIANCE
Fit the spacers (if supplied) on the upper part of the condenser at the
rear of the appliance.
After plugging the appliance to the mains, it starts the operation
automatically.
After starting the appliance, wait at least 4-6 hours before placing food
into the appliance .
Particular control elements are activated:
• The indicator LEDs on the control panels light up for 2 seconds.
• Activation of a beep for 1 second.
Note:
• If food is placed in the refrigerator before the appliance has cooled
completely, it may deteriorate.
CONTROL PANEL DESCRIPTION
(1) Cavity selection "Fridge / Freezer" pushbutton
(2) Green LED ON/OFF informing of:
- freezer cabinet temp. setting (green LED light ON)
- fridge cabinet temp. setting - (green LED light OFF)
(3) Temperature selection button "Te m p . ° C ".
(4) (5) (6) Green LEDs indicating temperature settings.
(7) "Reset alarm" pushbutton.
(8) Internal light switch.
Temperature Adjustment between cabinets is made
with the "Fridge / Freezer" button (1). When the
LED (2) is OFF the user can select temperature in
the fridge.
The temperature in the refrigerator compartment may be set by
the temperature setting pushbutton (3) on the control panel.
On the left there are described the 5 set
points for the fridge compartment.
At each short pressure of the "Fridge /
Freezer" button (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
To adjust the temperature in the freezer
compartment
, use the "Fridge / Freezer" button
(1) to control the temperature in the freezer
cabinet. The green LED (2) turns ON.
The temperature in the freezer compartment may be set by the
temperature setting pushbutton (3) on the control panel.
On the left are described the 5 set points for
the freezer compartment and fast freezing.
At each short pressure of the "Fridge /
Freezer" button (1), the setpoint will change
(cyclically).
The medium temp. is the recommended
temperature settings.
After setting the "Fast Freezing" (automatically disabled after 48 hours)
the freezer temperature is set to previous displayed setpoints. When the
product is disconnected from the power supply and then reconnected,
the control unit remembers previously set temperatures for freezer and
refrigerator.
FAN WITH A BUTTON
The fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "Fresh Control" function
can work and also when the ambient air temperature is over 27 ÷ 28°C
or if you perceive drops of water on the glass shelves or in the severe
humidity conditions.
Note
Do not obstruct the air intake area with food items.
When Fresh Control is disabled remember to turn off the fan
when there is a lower ambient air temperature. To turn off the fan
press the button (1a).
If the appliance has the fan it can be equipped with the antibacterial
filter.
Remove it from the box (found in the crisper drawer (item 7) and insert
into the cover of fan (item 1b).
The replacement procedure is attached with the filter.
PRODUCT SHEET
GB
ROBGRUSHSKCZPLIGB FINDKNSGRPENLFD
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Description:
LED OFF
LED ON
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
fast freezing (Freezer)
Description:
LED OFF LED ON
DEFROSTING THE REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment
indicate that the automatic defrost phase is in progress. The defrost
water is automatically run into a drain hole and collected in a container,
where it evaporates.
DEFROSTING THE FREEZER COMPARTMENT
No Frost freezers provide chilled air circulation around the storage
areas and prevent the formation of ice, thereby completely eliminating
the need for defrosting. Frozen items don't stick to the walls, labeling
stays legible and storage space remains neat and clear.
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from
the power supply before replacing any
light bulb.
If the inside light is not working, it is
necessary to:
1. Remove the light cover: put the fingers into the side ventilation holes
(1), stretch the cover gently and move it upwards.
2. Check the bulb. If necessary unscrew the broken bulb and replace it
with the new one (use maximum 15W bulb).
3. Put on the light cover.
Do not leave the bulb uncovered.
GUIDE TO SELECTING FUNCTIONS
Functions and settings
Fast Freezing: For more efficient freezing activate this function 48
hours before freezing fresh products.
- Select Freezer compartment by using button (1), LED (2) shall turn
ON.
- Press and hold the temperature setting button Te m p . ° C until 3 green
LEDs light up simultaneously (4) (5) (6).
After 24 hours place the food to be frozen in the upper basket of the
freezer compartment.
This function is automatically disabled after 48 hours. To
deactivate it earlier follow the procedure:
- Press and hold by 3 sec. the temperature setting button Te m p . ° C
again while the LED (2) remains ON - the temperature selection
lights will return to previous displayed temperature setpoint.
Reset alarm
If any alarm appears, the user could reset the acoustical sound by
pressing once Reset alarm pushbutton.
"Black-out alarm" (power supply failure) - in case of power failure,
the appliance automatically monitors the temperature changes in the
freezer compartment after the power supply returns. The "Black-out
alarm" will activate, if the temperature has risen above the admissible
level. This is indicated by:
- Flashing of the green LED (2)
- Activation of a beep.
When the "Black-out alarm" is actived, it is recommended to proceed
as follows:
- If the food in the freezer is not frozen but is still cold, transfer it
promptly to the refrigerator compartment and consume within 24
hours.
- If the food in the freezer is frozen, it has re-frozen after thawing
caused by the power failure. The consumption of re-frozen food is
not recommended because it has lost its nutritive value and may be
hazardous to your health.
Note
The "Black-out alarm" does not guarantee the food quality and its
safety in case of consumption. It only indicates the necessity to assess
the quality of food in the freezer and refrigerator compartments.
To deactivate the alarm, press once Reset alarm pushbutton, the
flashing of the green LED (2) go off.
- The temperature will return to the normal operating cycle level and
the beep will stop.
Door open alarm
When the refrigerator compartment door remains open for more than 2
minutes, the beep is activated.
When the door is closed the product returns to normal operation, the
beep will stop.
"6th Sense" function
The "6th Sense" function helps to maintain optimal conditions to
storage of food and is automatically activated when:
• a large amount of food is loaded into the freezer;
• the freezer door is left open for a long time;
• a prolonged power failure takes place, causing the internal
temperature of the appliance to increase to values that cannot
guarantee safe storage of food.
Fresh Control
The Fresh Control is activated by default and is working only with Fan
on. To disactivate the Fresh Control function press for at least 3 sec.
both buttons Cavity selection "Fridge / Freezer" and "Te m p . ° C ". A
long sound signal will be provided for the deactivation of the Fresh
Control.
In order to activate this function follow the same procedure (keeping
pressed the 2 buttons for 3 sec.). A short sound signal will be provided
for the activation of the Fresh Control.
This function controls the fridge fan in order to optimize food
preservation in any ambient temperature conditions.
To minimize the Energy consumption is suggested to disable the Fresh
Control function and fan.
PRODUCT SHEET
GB
5019 637 01073
Printed in Poland 03/10
OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LEDs
In case of abnormal appliance operation, all the temperature selection LEDs will flash and one beep will sound. To check the code
alarm user have to press and hold the temperature setting Te m p . ° C & Reset alarm pushbuttons and alarm code will be showing on
the temperature LEDs (possible alarm codes are explained in the table below).
When this operation is released, the LEDs will flash until the fault is eliminated. If any alarm shown in the table occurs, the
fridge/freezer functions such as temperature adjustment, super freezing are not available until the fault is eliminated.
When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest priority).
Alarm Priority
Codification to be displayed by
temperature LEDs
Action
LED 4 LED 5 LED 6
Evaporator Temperature Sensor Alarm - Freezer compartment 1 Contact the After-Sales Service and provide the alarm code.
Evaporator Temperature Sensor Alarm - Fridge compartment 2 Contact the After-Sales Service and provide the alarm code.
Ambient Temperature Sensor Alarm - Freezer compartment 3 Contact the After-Sales Service and provide the alarm code.
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
Description LED OFF LED ON
  • Page 1 1
  • Page 2 2

Whirlpool WBC 3534 A+NFCX Program Chart

WBC 3534 A+NFCX
Whirlpool
Brand
Whirlpool
Model
WBC 3534 A+NFCX
Category
Fridge-freezers
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents