Bauknecht KGE335 PROFRESH A++ WS Program Chart

Brand: Bauknecht

Model: KGE335 PROFRESH A++ WS

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

KGE335 PROFRESH A++ IO

Bauknecht KGE335 PROFRESH A++ WS is a cutting-edge refrigerator that offers a myriad of innovative features to keep your food fresh and organized. Its "ProFresh" function actively circulates air to maintain optimal humidity levels, preserving the quality and extending the lifespan of your fruits and vegetables. The "Fast Freezing" option rapidly freezes food, locking in nutrients and flavor. With the built-in "Black-Out Alarm," you're alerted if there's a power outage, ensuring your food stays safe.

A. Refrigerator Compartment

2. Lighting

3. Shelves / Shelf area

4. Multi-flow cold air system

5. Cooler compartment

6. Rating plate with commercial name

8. Crisper divider

9. Reversibility kit

10. Egg tray

11. Separator

12. Door trays

B. Freezer Compartment

13. Upper basket (freezing zone)

14. Ice tray and/or cold accumulator

15. Storage basket for frozen food items

16. The freezer door trays for pizza or other frozen products with a

short storage time (2** storage compartment)

Depending on the model the number and type of accesories may vary.

C. Control panel

Anti-bacterial protection:

1. Filter in fan (depending on the model)

7. Crisper with antibacterial additives (depending on the model)

17. Door seals

The crisper and the door seals are manufactured from materials that

inhibit bacterial growth.

Freezer using:

- The freezer compartment can be used without the baskets to increase

storage for large food. Place the food directly on the racks.

After inserting food, ensure that the freezer compartment door closes

properly.

Notes:

- In case of power failure the cold accumulator helps to keep optimal

storage temperature longer.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depends on the ambient

temperature, frequency of opening the doors, as well as location of the

appliance. Temperature setting must consider these factors.

- The appliance accessories are not suitable for washing in dishwasher.

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the upper part

of the condenser at the rear of the appliance.

After plugging the appliance to the mains, it

starts the operation automatically.

After starting the appliance, wait at least 4-6

hours before placing food into the appliance.

Particular control elements are activated:

• The indicator LEDs on the control panels light up for 2 seconds.

• Activation of a beep for 1 second.

Note:

• If food is placed in the refrigerator before the appliance has cooled

completely, it may deteriorate.

CONTROL PANEL DESCRIPTION

(1) Cavity selection "Fridge / Freezer" pushbutton

(2) Green LED ON/OFF informing of:

- freezer cabinet temp. setting (green LED light ON)

- fridge cabinet temp. setting - (green LED light OFF)

(3) Temperature selection button "Temp.°C".

(4) (5) (6) Green LEDs indicating temperature settings.

(7) "Reset alarm" pushbutton.

(8) Internal light switch.

Temperature Adjustment between cabinets is made

with the "Fridge / Freezer" button (1). When the

LED (2) is OFF the user can select temperature in

the fridge.

The temperature in the refrigerator compartment may be set by

the temperature setting pushbutton (3) on the control panel.

On the left there are described the 5 set

points for the fridge compartment.

At each short pressure of the "Fridge /

Freezer" button (1), the setpoint will change

(cyclically).

The medium temp. is the recommended

temperature settings.

To adjust the temperature in the freezer

compartment, use the "Fridge / Freezer" button

(1) to control the temperature in the freezer cabinet.

The green LED (2) turns ON.

The temperature in the freezer compartment may be set by the

temperature setting pushbutton (3) on the control panel.

On the left are described the 5 set points for

the freezer compartment and fast freezing.

At each short pressure of the "Fridge /

Freezer" button (1), the setpoint will change

(cyclically).

The medium temp. is the recommended

temperature settings.

After setting the "Fast Freezing" (automatically disabled after 24 hours)

the freezer temperature is set to previous displayed setpoints.

When the product is disconnected from the power supply and then

reconnected, the control unit remembers previously set temperatures

for freezer and refrigerator.

FAN WITH A BUTTON

The fan improves temperature distribution inside the refrigerator

compartment, allowing better preservation of stored food.

By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the "ProFresh" function can

work and also when the ambient air temperature is over 27 ÷ 28°C or

if you perceive drops of water on the glass shelves or in the severe

humidity conditions. If fridge is too cold the fan can be switched off.

Note:

Do not obstruct the air intake area with food items.

When ProFresh is disabled remember to turn off the fan when

there is a lower ambient air temperature.

To turn off the fan press the button (1a).

If the appliance has the fan it can be equipped with the antibacterial

filter.

Remove it from the box (found in the crisper drawer (item 7) and insert

into the cover of fan (item 1b).

The replacement procedure is attached with the filter.

DEFROSTING THE REFRIGERATOR COMPARTMENT

Refrigerator compartment defrosting is completely automatic.

Droplets of water on the rear wall inside the refrigerator compartment

indicate that the automatic defrost phase is in progress. The defrost

water is automatically run into a drain hole and collected in a container,

where it evaporates.

DEFROSTING THE FREEZER COMPARTMENT

The freezer should be defrosted once or twice a year or when excessive

frost is present (3 mm thickness). The formation of frost is normal. The

amount and rate at which frost accumulates depends on room

conditions and how often the door is open.

PRODUCT SHEET

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Description:

LED OFF

LED ON

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

fast freezing (Freezer)

Description:

LED OFF LED ON

IGB FINDKNSGRPENLFD

To defrost the unit, switch off the freezer

compartment or the whole appliance,

depending on the model, and remove all food

products. Leave the freezer door open to

allow the frost to melt.

For appliances in figure only pull out the

defrost water drain and place a container

under the drain.

When the operation is completed, put back

the defrost water drain.

Clean the inside of the freezer. Rinse and dry thoroughly. Switch the

freezer compartment, or the whole appliance, back on and store the

food inside.

REPLACING THE LIGHT BULB

Always disconnect the refrigerator from

the power supply before replacing any

light bulb.

If the inside light is not working, it is necessary to:

1. Remove the light cover: put the fingers into the side ventilation holes

(1), stretch the cover gently and move it upwards.

2. Check the bulb. If necessary unscrew the broken bulb and replace it

with the new one (use maximum 15W bulb).

3. Put on the light cover.

Do not leave the bulb uncovered.

GUIDE TO SELECTING FUNCTIONS

Functions and settings

Fast Freezing: For more efficient freezing activate this function 24

hours before freezing fresh products.

- Select Freezer compartment by using button (1), LED (2) shall turn

ON.

- Press and hold the temperature setting button Te m p . ° C until 3 green

LEDs light up simultaneously (4) (5) (6).

After 24 hours place the food to be frozen in the upper basket of the

freezer compartment.

This function is automatically disabled after 24 hours.

To deactivate it earlier follow the procedure:

- Press and hold by 3 sec. the temperature setting button Te m p . ° C

again while the LED (2) remains ON - the temperature selection lights

will return to previous displayed temperature setpoint.

Reset alarm

If any alarm appears, the user could reset the acoustical sound by

pressing once Reset alarm pushbutton.

"Black-out alarm" (power supply failure) - in case of power failure,

the appliance automatically monitors the temperature changes in the

freezer compartment after the power supply returns. The "Black-out

alarm" will activate, if the temperature has risen above the admissible

level.

This is indicated by:

- Flashing of the green LED (2)

- Activation of a beep.

When the "Black-out alarm" is actived, it is recommended to proceed

as follows:

- If the food in the freezer is not frozen but is still cold, transfer it

promptly to the refrigerator compartment and consume within 24

hours.

- If the food in the freezer is frozen, it has re-frozen after thawing

caused by the power failure. The consumption of re-frozen food is not

recommended because it has lost its nutritive value and may be

hazardous to your health.

Note

The "Black-out alarm" does not guarantee the food quality and its

safety in case of consumption. It only indicates the necessity to assess

the quality of food in the freezer and refrigerator compartments.

To deactivate the alarm, press once Reset alarm pushbutton, the

flashing of the green LED (2) go off.

- The temperature will return to the normal operating cycle level and

the beep will stop.

Door open alarm

When the refrigerator compartment door remains open for more than 2

minutes, the beep is activated.

When the door is closed the product returns to normal operation, the

beep will stop.

Overtemperature alarm in freezer compartment.

Overtemperature alarm activation is indicated by:

- Flashing of the green lamps (4) (5) (6).

- Activation of a beep.

The alarm is activated when:

• The appliance is connected to the power supply for the first time or

after prolonged disuse.

• The freezer compartment temperature is too high.

• The quantity of foods loaded into the freezer exceeds that indicated

on the data plate.

• The freezer door has been left open for a long time .

To deactivate the beep of the alarm, press Reset alarm pushbutton.

The flashing LEDs (4) (5) (6) go off when the minimum required

temperature is reached.

"Dynamic Intelligence" function

The "Dynamic Intelligence" function helps to maintain optimal

conditions to storage of food and is automatically activated when:

• a large amount of food is loaded into the refrigerator and freezer;

• the freezer door is left open for a long time;

• a prolonged power failure takes place, causing the internal

temperature of the appliance to increase to values that cannot

guarantee safe storage of food.

ProFresh

The ProFresh is activated by default and is working only with Fan on.

To disactivate the ProFresh function press for at least 3 sec. both

buttons Cavity selection "Fridge / Freezer" and "Temp.°C". A long

sound signal will be provided for the deactivation of the ProFresh.

In order to activate this function follow the same procedure (keeping

pressed the 2 buttons for 3 sec.). A short sound signal will be provided

for the activation of the ProFresh.

This function controls the fridge fan in order to optimize food

preservation in any ambient temperature conditions.

To minimize the Energy consumption is suggested to disable the

ProFresh function and fan.

5019 437 01025

Printed in Poland 03/10

OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LEDs

In case of abnormal appliance operation, all the temperature selection LEDs will flash and one beep will sound. To check the code alarm user have to

press and hold the temperature setting Temp.°C & Reset alarm pushbuttons and alarm code will be showing on the temperature LEDs (possible

alarm codes are explained in the table below).

When this operation is released, the LEDs will flash until the fault is eliminated. If any alarm shown in the table occurs, the fridge/freezer functions

such as temperature adjustment, super freezing are not available until the fault is eliminated.

When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest priority).

Alarm Priority

Codification to be displayed by

temperature lamps

Action

LED 4 LED 5 LED 6

Evaporator Temperature Sensor Alarm - Freezer compartment 1 Contact the After-Sales Service and provide the alarm code.

Evaporator Temperature Sensor Alarm - Fridge compartment 2 Contact the After-Sales Service and provide the alarm code.

Ambient Temperature Sensor Alarm - Fridge compartment 3 Contact the After-Sales Service and provide the alarm code.

Description: LED OFF LED ON

PRODUCT SHEET