LADEN DC 190 Program Chart

Brand: LADEN

Model: DC 190

Type: Program Chart

PRODUCT SHEET

F NL E PGB GR

A. Refrigerator Compartment

1. Light

2. Shelves / Shelf area

3. Crispers

4. Door trays

5. Removable bottle retainer (depending

on model)

6. Rating plate (at the side of the crispers)

7. Fan (depending on model)

7a. Fan intake area

B. Freezer compartment

8. Rack for ice cube trays or ice packs

(depending on model)

9. Upper basket (area for freezing)

10. Baskets for storing frozen food

11. Freezer compartment door

C. Control panel

Least cold zone

Intermediate temperature zone

Coldest zone

N.B.: The number of shelves and type of accessories may vary, depending on the model.

All shelves, door trays and racks are removable.

Important: Fridge-freezer accessories must not be washed in a dishwasher.

5019 637 33053

F NL E PGB GR

The fridge-freezer has two compressors which allow independent control of the

refrigerator and freezer compartments.

Control panel

1. Refrigerator compartment "ON" button.

2. Green LED indicating operation of the

refrigerator compartment.

3. Refrigerator compartment temperature

controls.

3a. Display indicating the refrigerator

temperature setting.

4. Freezer compartment "ON" button.

5. Green LED indicating operation of the

freezer compartment.

6. Freezer compartment temperature controls.

6a. Display indicating the freezer temperature

setting.

7. Fast freeze button.

8. Fast freeze indicator LED (yellow).

9. Red LED alarm for indicating critical

temperatures within the freezer (see chapter

“How to operate the freezer compartment”).

10. Button to deactivate the freezer temperature

acoustic alarm.

11. Fast cooling button.

12. Fast cooling indicator LED (yellow).

Refrigerator compartment internal temperature control

The temperature is factory set to +5°C (display 3a). Adjusting the temperature:

Press the button (3) until the display shows the desired value (3a).

Temperature selection limit: from +2°C (minimum)

a +8°C (maximum)

Freezer compartment internal temperature control

The temperature is factory set to -19°C (display 6a). Adjusting the temperature:

Press button (6) until the display shows the desired value (6a).

Temperature selection limit: from -18°C (maximum)

to -24°C (minimum)

Note: The ambient air temperature, the frequency of opening the door and the position of the appliance can

affect the internal temperatures of the refrigerator. These factors should therefore be taken into account

when setting the temperature with buttons (3) and (6).

Fan (depending on model):

The fan gives more even temperature distribution inside the refrigerator compartment, thus allowing better

conservation of stored food.

The fan can be switched off by pressing the specific button (if provided - depending on the model).

Important: The fan is electrically operated. The electronic device activates the fan when it is necessary.

DO NOT obstruct the fan intake area (7a) with food.

LOW ENERGY CONSUMPTION (blank display function).

The power consumption values take into account the active function. To disable this function, press button

10 (press for at least 5 seconds) until the display becomes blank; it will switch on again for approx. 1 minute

whenever the door is opened or a button is pressed. To disable the function, press button 10 again until the

acoustic signal sounds.

The function switches off automatically when the alarm is deactivated.

The fridge-freezer can operate at ambient temperatures between +16°C and +38°C.

LADEN DC 190 Program Chart

LADEN DC 190 Program Chart

LADEN DC 190 Program Chart

Related papers

Other documents