Bauknecht KGEA 320 BIO OPTIM. Program Chart

Brand: Bauknecht

Model: KGEA 320 BIO OPTIM.

Type: Program Chart

PRODUCT SHEET

A. Refrigerator Compartment

Lighting

Shelves / Shelf area

2a.

Plastic bottle shelf “Dual” (depending on the model)

Rating plate

Removable bottle holder

Door trays

B. Freezer Compartment

Upper basket (freezing zone)

Ice tray and/or cold accumulator (depending on the model)

10.

Storage basket for frozen food items

12.

The freezer door trays for pizza or other frozen products with a

short storage time (depending on the model)

C. Control panel

Anti-bacterial protection:

5. Hygiene+filter in fan

4. Hygiene crisper

11. Door seals

Note:

• The crisper and the door seals

are manufactured from materials

that inhibit bacterial growth.

• In case of power failure the cold accumulator helps to keep

optimal storage temperature longer.

• The internal temperatures of the appliance

depend on the

ambient temperature, frequency of opening the doors, as well as

location of the appliance. Adjust the thermostat knob depending on

these factors.

• The number and type of shelves,

as well as configuration of

accessories may vary, depending on model. All shelves and door

trays are removable.

• The appliance accessories

are not suitable for washing in a

dishwasher.

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, the

refrigerator

compartment

starts operation automatically. Particular control

elements are activated:

•

The indicator lamps on the control panels light up for 2 seconds.

• The alarm becomes activated for 1 second.

The

refrigerator compartment

will turn on after the knob is

moved from the position OFF to any other selected position, from 1

to 7.

NOTE

•

If food is placed in the refrigerator before the appliance has cooled

completely, it may deteriorate.

OPERATION DESCRIPTION

Temperature Adjustment:

The temperature in the refrigerator compartment

may be set

by turning the knob on the control panel.

To set a lower temperature, turn the knob to position 7.

- To set a higher temperature, turn the knob to position 1.

- Knob set to position OFF - refrigerator deactivated.

Recommend thermostat knob position is 3-4.

To adjust the temperature in the freezer compartment

, use

the temperature selection function.

•

Each consecutive pressing of the button sets temperature:

- Minimum

- Medium

- Maximum

One of the green indicator lights, as appropriate, ligths up on the

control panel (under the asterisks)

•

The temperature of the freezer is factory set to position (medium).

The middle indicator ligth under the asterisks on the control panel

is on.

•

When the appliance is disconnected from power supply and then

re-connected, the freezer remembers the previously set

temperature.

CONTROL PANEL DESCRIPTION

On/Off buttons

Alarm deactivating button: “

RESET

”.

Yellow indicator light informing of an alarm: “

Black Out

” power

failure.

Temperature selection button

“-/+”

Green lamps indicating the “

Freezer Temperature

”.

“

Fast Freezing

” button.

Knob for turning the refrigerator turn on and setting the

temperature.

Fan with a button

The fan helps to achieve better temperature distribution inside the

refrigerator compartment, and optimizes food storage conditions.

Press button (5b) to turn the fan on when the ambient temperature is

above 27, 28°C, when condensation occurs on the shelves, and in the

instances of high air humidity.

Note:

Do not obstruct the air intake area (5a) with food items.

The fan ONLY runs if the compressor is working.

Make sure to turn the fan off in lower ambient temperatures.

The

Hygiene+ filter

ensures a higher level of hygiene in your

refrigerator through continuous purifying of circulating air from

bacteria. Remove it from the box (found in the crisper drawer (item

4) and insert into the grille (item 5c).

Replace the filter every 6 months.

Remove the filter together with the grille and dispose as a whole.

Replace the filter and the grille with the new ones.

The replacement procedure is attached with the filter.

Our After-sales Service can supply this type of filter.

Light

- how to replace the bulb

Before replacing the bulb, remove the power plug from the mains

socket. Next:

1 - Hold the diffuser as shown and squeeze it slightly.

2 - Slide it towards the rear of the appliance

3 - Unscrew the light bulb as illustrated in the picture.

GUIDE TO SELECTING FUNCTIONS

Functions and settings

Alarm deactivation

“

Black-out

”

Alarm (power supply failure)-

in case of

power failure, the appliance automatically monitors the

temperature changes in the freezer compartment. After the

power supply returns,- the

“Black-out”

alarm will activate, if

the temperature has risen above the admissible level. This is

indicated by:

- Flashing of the yellow indicator lamp (2).

- Activation of a beep.

When the “

Black-out

” alarm is active, it is recommended to

proceed as follows:

- If the food in the freezer is not frozen but is still cold,

transfer it promptly to the refrigerator compartment and

consume within 24 hours.

- If the food in the freezer is frozen, it has re-frozen after

thawing caused by the power failure. Consumption of re-

frozen food is not recommended since it lost its nutritive

value and may be hazardous to your health.

Note:

The “

Black-out

” alarm does not guarantee the food

quality and its safety in case of consumption. It only informs

about the necessity to assess the quality of food in the freezer

and refrigerator compartments.

To deactivate the alarm, press the “

RESET

” button for

approximately 3 seconds, until the indicator light goes off.

The temperature will return to the normal operating cycle

level and the beep will silence.

Fast Freezing

: Activate this function before freezing fresh

products.

Press the “

Fast Freezing

” button to start the function

- 3 green indication lamps will light up simultaneously. This

function is automatically disabled after 24 hours. To

deactivate it earlier:

- Press the “

Fast Freezing

” button again - the

temperature selection lights will return to the previously

set temperature level.

- Press the temperature selection button in the freezer

compartment.

Temperature selection

- It is possible to select the

freezer temperature from among 3 levels

(minimum, medium, maximum) by pressing the

temperature selection button .

Other abnormal appliance operations displayed by indicator lamps.

In case of abnormal appliance operation, all the temperature selection indicator lamps will flash and a beep will sound. After pressing and

holding the alarm deactivation “

RESET

” button, the beep will stop and the indicator lamps will light up, showing the alarm code (possible

alarm codes are explained in the table below ).

After the “

RESET

” is released, the indicator lamps will flash until the fault is eliminated. If any alarm shown in the table occurs, the freezer

functions such as temperature adjustment and fast freezing are not available until the fault is eliminated.

When several alarms occur simultaneously, the alarm with the highest priority is displayed (with code 01 being the highest priority.)

After determining the alarm code (between 01 and 05):

•

The user can eliminate the reason of the code 05 alarm by closing the door completely.

•

Code 04 alarm - The alarm deactivates when the minimum required temperature is reached.

•

The other alarms (code 01, 02, 03) - Contact the After-Sales Service and provide the alarm code.

Alarm priority Alarm code Temperature

setting indicator lamps on

minimum

MIN

medium

MED

maximum

MAX

Potentiometer failure 01 No No Yes

Evaporator sensor failure 02 No Yes No

Freezer sensor failure 03 Yes No No

High freezer compartment

temperature alarm

04 Yes Yes No

Open door alarm 05 Yes Yes Yes

5019 437 01006

Bauknecht KGEA 320 BIO OPTIM. Program Chart

Bauknecht KGEA 320 BIO OPTIM. Program Chart

Bauknecht KGEA 320 BIO OPTIM. Program Chart

Related papers

Other documents