Bauknecht KDN 400 PROFRESH A+IN Program Chart

Brand: Bauknecht

Model: KDN 400 PROFRESH A+IN

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

KDN 401 PROFRESH A+IN

Bauknecht KDN 400 PROFRESH A+IN: This advanced refrigerator-freezer features innovative technologies for optimal food preservation. Its "Zero Degrees" box maintains low temperatures and suitable humidity, extending the freshness of meat, fish, fruits, and vegetables. The "6th Sense" function automatically adjusts settings based on usage patterns, ensuring ideal storage conditions. The "Fresh Control" system with a fan improves temperature distribution, preventing condensation and preserving food quality.

A. Refrigerator Compartment

1. Filter in fan

2. Lighting

3. Shelves / Shelf area

4. Multi-flow cold air system

5. Cooler compartment (best for meat and fish) or

"Zero Degrees" box (to keep foods fresher for

longer)

6. Rating plate with commercial name

7. Fruits and vegetables crisper

7a. Crisper divider

8. Egg tray

9. Reversibility kit

10. Separator

11. Door trays

B. Freezer Compartment

12. Area for freezing ( with/without flap)

13. Area for storing frozen foods

14. Ice tray

15. Plastic shelf

16. The freezer door tray for pizza or other frozen

products with a short storage time (2** storage

compartment)

17. Door seals

C. Control panel

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (1)

- Antibacterial additives in the Crisper (7)

- Door seals are made of material able to inhibit bacterial

growth (17).

Notes:

- Depending on the model the number and type of

accessories may vary.

- In case it'll have a flap, please remember that to

maximize the storage volume it's suggested to remove

it.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on

the ambient temperature, frequency of opening the

doors, as well as location of the appliance. Temperature

setting must consider these factors.

- The appliance accessories are not suitable for washing in

dishwasher.compartment door closes properly.

HYDROSENSE SHELVES

(depending of the model)

The special contour of the HydroSense shelves creates a

barrier that contain spills and simplifies cleanup,

preventing liquids from leaking onto shelves below.

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the upper part of the

condenser at the rear of the

appliance. After plugging the

appliance to the mains, it starts the

operation automatically.

After starting the appliance, wait at least 4-6 hours before

placing food into the appliance .

Particular control elements are activated:

• The indicator LEDs on the control panels light up for 2

seconds.

• Activation of a beep for 1 second.

Note:

• If food is placed in the refrigerator before the appliance

has cooled completely, it may deteriorate.

CONTROL PANEL DESCRIPTION

(1) Cavity selection "Fridge / Freezer" pushbutton

(2) Green LED ON/OFF informing of:

- freezer cabinet temp. setting (green LED light ON)

- fridge cabinet temp. setting - (green LED light OFF)

(3) Temperature selection button "Temp.°C".

(4) (5) (6) Green LEDs indicating temperature settings.

(7) "Reset alarm" pushbutton.

Temperature Adjustment between

cabinets is made with the "Fridge /

Freezer" button (1). When the LED (2) is

OFF the user can select temperature in

the fridge.

The temperature in the refrigerator compartment

may be set by the temperature setting pushbutton (3) on

the control panel.

On the left there are described the 5

set points for the fridge

compartment.

At each short pressure of the

"Fridge / Freezer" button (1), the

setpoint will change (cyclically).

The medium temp. is the

recommended temperature settings.

To adjust the temperature in the

freezer compartment, use the "Fridge

/ Freezer" button (1) to control the

temperature in the freezer cabinet. The

green LED (2) turns ON.

PRODUCT SHEET

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Description:

LED OFF LED ON

ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

The temperature in the freezer compartment may

be set by the temperature setting pushbutton (3) on the

control panel.

On the left are described the 5 set

points for the freezer compartment

and fast freezing.

At each short pressure of the

"Fridge / Freezer" button (1), the

setpoint will change (cyclically).

The medium temp. is the

recommended temperature settings.

After setting the "Fast Freezing" (automatically disabled

after 48 hours) the freezer temperature sets previous

displayed setpoints.

When the product is disconnected from the power

supply and then reconnected, the control unit

remembers previously set temperatures for freezer and

refrigerator.

FAN WITH A BUTTON

The fan improves temperature distribution inside the

refrigerator compartment, allowing better preservation

of stored food.

By default, the fan is ACTIVE.

It is advisable to keep the fan active, so that the "Fresh

Control" / "ProFresh" function can work and also when

the ambient air temperature is over 27 ÷ 28°C or if you

perceive drops of water on the glass shelves or in the

severe humidity conditions.

Note

Do not obstruct the air intake area with food

items.

When "Fresh Control" / "ProFresh" is disabled

remember to turn off the fan when there is a lower

ambient air temperature.

To turn off the fan press the button (1a).

If the appliance has the fan it can be equipped with the

antibacterial filter.

Remove it from the box (found in the crisper drawer

(item 7) and insert into the cover of fan (item 1b).

The replacement procedure is attached with the filter.

“ZERO DEGREES” BOX

(depending on the model)

The "Zero Degrees" box is

specifically designed to maintain a

low temperature and a suitable

humidity level, in order to keep

foods fresher for longer (e.g.

meat, fish, fruit and winter

vegetables).

Activating and deactivating the box

The temperature inside the box, when active, is

approximately 0°.

The following factors are vital for the "Zero Degrees" box

to work properly:

- the refrigerator compartment must be switched on

- the temperature of the refrigerator compartment must

be between +2°C and +5°C

- the box must be inserted to enable activation

- no special functions must have been selected (Standby,

Cooling-Off, Vacation – where applicable).

If one of these special functions has been selected, the

"Zero Degrees" box must be deactivated manually, and

any fresh food inside it removed. If manual deactivation

does not take place, the box will be deactivated

automatically after 8 hours.

Note:

- if the symbol does not light up when the box is

activated, check that the box is properly inserted; if the

problem persists, contact your nearest authorized

After-sales Service

- if the box is active and the drawer open, the symbol on

the control panel may be deactivated automatically. If

the drawer is inserted, the symbol will become active

again

- irrespective of the state of the box, a slight noise may

be heard: this is normal and is not a cause for concern.

- when the box is not active, the temperature inside it

depends on the general temperature inside the

refrigerator compartment. In this case, we recommend

it is used to store fruit and vegetables which are not

sensitive to cold temperatures (fruits of the forest,

apples, apricots, carrots, spinach, lettuce, etc.).

Important: when the function is activated and there are

foodstuffs with a high water content, condensation may

form on shelves. In this case, disable the function

temporarily.

Removing the "Zero Degrees" box:

The "Zero Degrees" box can be removed to create more

space inside the refrigerator. In this case proceed as

follows:

- switch off the box

- pull out the drawer and the white plastic shelf

underneath the box.

Note: the upper shelf and the side supports cannot be

removed.

To restore "Zero Degrees" box operation, make sure you

replace the white plastic shelf underneath the box before

inserting the drawer and reactivating the function. To

optimise energy consumption, we recommend you

deactivate the "Zero Degrees" box and remove it.

Clean the box and all its parts regularly, using a cloth and

a solution of warm water and neutral detergent

PRODUCT SHEET

To activate/deactivate the box, press

the button as illustrated in the figure.

When the box has been

activated, the symbol lights up.

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

fast freezing (Freezer)

Description:

LED OFF

LED ON

ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

specifically formulated for refrigerator interiors (take care

not to immerse the white plastic shelf underneath the

box in water).

Before cleaning the box (including the outside),

remove the drawer so as to disconnect the box

from the electricity supply.

Never use abrasive detergents.

GUIDE TO SELECTING FUNCTIONS

Fast Freezing: For more efficient freezing activate this

function 48 hours before freezing fresh products.

- Select Freezer compartment by using button (1), LED

(2) shall turn ON.

- Press and hold the temperature setting button

Te m p . ° C until 3 green LEDs light up simultaneously (4)

(5) (6).

This function is automatically disabled after 48

hours. To deactivate it earlier follow the procedure:

- Press and hold by 3 sec. the temperature setting button

Te m p . ° C again while the LED (2) remains ON - the

temperature selection lights will return to previous

displayed temperature setpoint.

Reset alarm

If any alarm appears, the user could reset the acoustical

sound by pressing once Reset alarm pushbutton.

"Black-out alarm" (power supply failure) - in case of

power failure, the appliance automatically monitors the

temperature changes in the freezer compartment after

the power supply returns. The "Black-out alarm" will

activate, if the temperature has risen above the

admissible level. This is indicated by:

- Flashing of the green LED (2)

- Activation of a beep.

When the "Black-out alarm" is actived, it is

recommended to proceed as follows:

- If the food in the freezer is not frozen but is still cold,

transfer it promptly to the refrigerator compartment

and consume within 24 hours.

- If the food in the freezer is frozen, it has re-frozen after

thawing caused by the power failure. The consumption

of re-frozen food is not recommended because it has

lost its nutritive value and may be hazardous to your

health.

Note

The "Black-out alarm" does not guarantee the food

quality and its safety in case of consumption. It only

indicates the necessity to assess the quality of food in the

freezer and refrigerator compartments.

To deactivate the alarm, press once Reset alarm

pushbutton, the flashing of the green LED (2) go off.

- The temperature will return to the normal operating

cycle level and the beep will stop.

Overtemperature alarm in freezer compartment.

Overtemperature alarm activation is indicated by:

- Flashing of the green lamps (4) (5) (6).

- Activation of a beep.

The alarm is activated when:

• The appliance is connected to the power supply for the

first time or after prolonged disuse.

• The freezer compartment temperature is too high.

• The quantity of foods loaded into the freezer exceeds

that indicated on the data plate

• The freezer door has been left open for a long time .

To deactivate the beep of the alarm, press Reset alarm

pushbutton. The flashing LED s (4) (5) (6) go off when

the minimum required temperature is reached.

"6th Sense" / "Green Intelligence" function

The "6th Sense" / "Green Intelligence" function helps

to maintain optimal conditions to storage of food and is

automatically activated when:

• a large amount of food is loaded into the freezer;

• the freezer door is left open for a long time;

• a prolonged power failure takes place, causing the

internal temperature of the appliance to increase to

values that cannot guarantee safe storage of food.

"Fresh Control" / "ProFresh"

The "Fresh Control" / "ProFresh" is activated by default

and is working only with Fan on. To disactivate the

"Fresh Control" / "ProFresh" function press for at least

3 sec. both buttons Cavity selection "Fridge / Freezer"

and "Temp.°C". A long sound signal will be provided for

the deactivation of the "Fresh Control" / "ProFresh".

In order to activate this function follow the same

procedure (keeping pressed the 2 buttons for 3 sec.). A

short sound signal will be provided for the activation of

the "Fresh Control" / "ProFresh".

This function controls the fridge fan in order to optimize

food preservation in any ambient temperature conditions.

To minimize the Energy consumption is suggested to

disable the "Fresh Control" / "ProFresh" function and

fan.

ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

5019 636 01011

Printed in Poland 02/11

DEFROSTING THE REFRIGERATOR

COMPARTMENT

Refrigerator compartment defrosting is completely

automatic.

Droplets of water on the rear wall inside the refrigerator

compartment indicate that the automatic defrost phase is

in progress. The defrost water is automatically run into a

drain hole and collected in a container, where it

evaporates.

DEFROSTING THE FREEZER

COMPARTMENT

No Frost freezers provide chilled air circulation around

the storage areas and prevent the formation of ice,

thereby completely eliminating the need for defrosting.

Frozen items don't stick to the walls, labeling stays legible

and storage space remains neat and clear.

REPLACING THE LIGHT

(depending on the model)

BULB's LIGHTING

Always disconnect the refrigerator from the power

supply before replacing any light bulb.

If the inside light is not working, it is necessary to:

1. Remove the light cover: put

the fingers into the side

ventilation holes (1), stretch

the cover gently and move it

upwards.

2. Check the bulb. If necessary unscrew the broken bulb

and replace it with the new one (max power of the

light bulb is given on the light cover).

3. Put on the light cover.

Do not leave the bulb

uncovered.

LED's LIGHTING

If the inside LED light is not

working, it must be replace by

service.

OTHER ABNORMAL APPLIANCE OPERATIONS DISPLAYED BY LEDs

In case of abnormal appliance operation, all the temperature selection LEDs will flash and one beep will sound. To

check the code alarm user have to press and hold the temperature setting Te m p . ° C & Reset alarm pushbuttons and

alarm code will be showing on the temperature LEDs (possible alarm codes are explained in the table below).

When this operation is released, the LEDs will flash until the fault is eliminated. If any alarm shown in the table occurs,

the fridge/freezer functions such as temperature adjustment, super freezing are not available until the fault is

eliminated.

When several alarms occur simultaneously, the alarm with the highest priority is displayed (Number 1 being the highest

priority).

Alarm Priority

Codification to be displayed by

temperature LEDs

Action

LED 4 LED 5 LED 6

Evaporator Temperature Sensor Alarm - Freezer compartment 1 Contact the After-Sales Service and provide the alarm code.

Evaporator Temperature Sensor Alarm - Fridge compartment 2 Contact the After-Sales Service and provide the alarm code.

Ambient Temperature Sensor Alarm - Fridge compartment 3 Contact the After-Sales Service and provide the alarm code.

Description: LED OFF LED ON

Bauknecht KDN 400 PROFRESH A+IN Program Chart

Brand: Bauknecht

Model: KDN 400 PROFRESH A+IN

Category: Fridge-freezers

Type: Program Chart

This manual is also suitable for

KDN 401 PROFRESH A+IN

Download PDF

report

Bauknecht KDN 400 PROFRESH A+IN Program Chart

This manual is also suitable for

Bauknecht KDN 400 PROFRESH A+IN Program Chart

Related papers

Other documents