GSS PDP 900 Assembly Instructions

Brand: GSS

Model: PDP 900

Type: Assembly Instructions

GSS PDP 900: This power pack is designed for use with cascaded multiswitches in a SAT receiver system. It provides power to the connected LNBs, eliminating the need for a separate power supply for each LNB. The power pack's SAT-IF inputs and outputs are D.C. coupled, allowing voltage to be carried to all SAT-IF lines. The device features a compact design and is easy to install, making it a convenient solution for powering LNBs in a multiswitch system.

English

CLASS

KLASSE

PDP 900

Multiswitch Power Pack

GSS

Grundig SAT Systems GmbH

Beuthener Strasse 43

D-90471 Nuremberg

Phone: +49 (0) 911 / 703 8877

Fax: +49 (0) 911 / 703 9210

E-mail: [email protected]

Internet: http://www.gss.de

- 2 - PDP 900

1 Important information on the safety and assembly

• Assemblyandservicingshouldbecarriedoutbyelectricians.

 • Checkthesystemforshortcircuitsinthecoaxialcablesbeforestartingup.

 • Onlyinstallthesystemwhenitisnotconnectedtothemainssupply(230V).

 • Mountthepowerpackandthemultiswitches…

 - onanon-flammablebackground(wall),

 - inadust-free,dryenvironment,

 insuchamannerthatitisprotectedfrommoisture,fumes,splashingwater

anddampness,

 - somewhereprotectedfromdirectsunlight,

 - notwithintheimmediatevicinityofheatsources,

 • Ensurethatthesystemisadequatelyventilated.

  Donotcovertheventilationslots!

 • Bewareofshortcircuits!

 • Noliabilityisacceptedforanydamagecausedbyfaultyconnectionsor

inappropriatehandling.

 •

Observe the relevant standards, regulations and guidelines

 (IEC/EN/

DINEN60065etc.).

Electronic devices should never be disposed of in the household rubbish. In

accordance with directive 2002/96/EC of the European Parliament and the

European Council from January 27, 2003 which addresses old electronic and

electrical devices, such devices must be disposed of at a designated collection

facility. At the end of its service life, please take your device to one of these

public collection facilities for proper disposal.

2 Technical description

Thepowerpackisonlyusedinconjunctionwiththecascadedmultiswitchesof

aSATreceiversystemtosupplypowertotheconnectedLNBs.

 ThepowersupplytotheLNBscomesfromtheSAT-IFinputsofthemultiswitch-

es.Cascadedmultiswitchesonlyneedonepowerpack,whichcanbefittedto

anymultiswitch.TheSAT-IFinputsandoutputsareD.C.coupled.Thiscarries

thevoltagetoalltheSAT-IFlines.

- 3 - PDP 900

3 Assembly

 • Unscrewthe2screwsAatthePDC….

 • ConnecttheDCoutput(+18VDCOUT)ofthepowerpacktotheDCinput

(+18VDCIN)ofthePDC….

+18V DC

OUT

 • Screwthepowerpacktightlywiththe2screwsA.

Power LED

Ventilation openings

 • Tighten4screwsB.

4 Specification

PDP 900

Mainsvoltage

100-230VAC,50/60Hz

Outputvoltage

18VDC

Max.outputcurrent

1000mADC

Ambienttemperature

-20°C…+50°C

Dimensions(WxHxD)[mm]approx.

70x133x55

Service:

Phone:+49(0)911/7032221•Fax:+49(0)911/7032326•Email:ser[email protected]

GrundigSATSystemsGmbH•BeuthenerStraße43•D-90471Nürnberg

GSS PDP 900 Assembly Instructions

GSS PDP 900 Assembly Instructions

GSS PDP 900 Assembly Instructions

Related papers

Other documents