GSS PHDT 1000 H Assembly Instruction Manual

Brand: GSS

Model: PHDT 1000 H

Type: Assembly Instruction Manual

Assembly Instruction

PHDT 1000 H

- 2 - PHDT 1000 H

Contents

1 Safety regulations and notes ..............................................................................4

2 General information ..........................................................................................5

2.1 Packing contents ................................................................................ 5

2.2 Meaning of the symbols used ............................................................... 5

2.3 Technical data.................................................................................... 5

2.4 Description ........................................................................................ 7

General ............................................................................................ 7

Hotel modes ...................................................................................... 8

Single Service .............................................................................. 8

Split Audio ................................................................................... 8

Common Portal ............................................................................. 8

Private Portal ................................................................................ 8

PayTV .......................................................................................... 9

Control via UDP ............................................................................ 9

2.5 Software query ................................................................................ 10

3 Assembly ........................................................................................................11

3.1 Installing the cassette ........................................................................ 11

3.2 EMC regulations .............................................................................. 12

3.3 Cassette overview ............................................................................ 13

3.4 Connecting the cassette ..................................................................... 13

3.5 Retrofitting a CA module ................................................................... 14

4 The control panel at a glance ...........................................................................15

4.1 Menu items ...................................................................................... 15

4.2 Control panel ................................................................................... 15

5 Programming ..................................................................................................16

5.1 Preparation...................................................................................... 16

5.2

Notes on level setting ........................................................................ 16

5.3 Programming procedure .................................................................... 17

5.4 Programming the cassette ................................................................. 20

Selecting the cassette ........................................................................ 20

Ethernet parameters .......................................................................... 21

IP address of the cassette ............................................................. 21

Address range ............................................................................ 22

Address of the gateway ............................................................... 22

UDP port ...................................................................................... 22

Hotel mode ...................................................................................... 23

Single Service ............................................................................ 23

Split Audio ................................................................................. 23

Common Portal ........................................................................... 24

Private Portal .............................................................................. 24

PayTV ........................................................................................ 24

- 3 - PHDT 1000 H

Output signal path ............................................................................ 25

ASI transfer rate ............................................................................... 25

Setting the ASI options ...................................................................... 25

Selecting the channel strip ................................................................. 26

Selecting channel / frequen cy setting.................................................. 26

Output channel/frequency on/off ....................................................... 27

Output channel ........................................................................... 27

Output frequency ........................................................................ 27

Switching the modulator off or on ................................................. 28

Adjusting the output levels of the channel strips .................................... 28

LNB oscillator frequency / control voltage ........................................... 29

LNB oscillator frequency .............................................................. 29

DiSEqC commands ...................................................................... 29

Input symbol rate / DVB mode ........................................................... 30

Input symbol rate ........................................................................ 30

DVB mode.................................................................................. 31

Input frequency ................................................................................ 31

Testing the signal to noise ratio ..................................................... 32

Transport stream ID and the ORGNET-ID ............................................. 33

Setting the station filter ...................................................................... 33

Free station ...................................................................................... 34

Rooms/Quantity ............................................................................... 34

Video ID/Audio PID .......................................................................... 34

Station nummer ................................................................................ 35

Station name ................................................................................... 35

COFDM parameters ......................................................................... 36

Output signal

......................................................................................39

Transmission parameters ................................................................... 40

Transmitter identification .................................................................... 41

Stuffing ........................................................................................... 42

Network Information Table (NIT) ......................................................... 43

Factory reset / Cassette reset ............................................................. 44

Factory reset............................................................................... 44

Cassette reset (Restart) ................................................................. 45

Saving settings ................................................................................. 45

6 Final procedures .............................................................................. 46

7 Channel and frequency tables ..........................................................................47

- 4 - PHDT 1000 H

1 safety regulations and notes

• Assembly, installation and servicing should be carried out by authorised

electricians.

• Switch off the operating voltage of the system before beginning with assem-

bly or service work or pull out the mains plug.

• Do not perform installation and service work during thunderstorms.

• Install the system so it will not be able to vibrate…

- in a dust-free, dry environment

- in such a manner that it is protected from moisture, fumes, splashing wa-

ter and dampness

- somewhere protected from direct sunlight

- not within the immediate vicinity of heat sources

- in an ambient temperature of 0 °C to +50 °C. In case of the formation of

condensation wait until the system is completely dried.

• Ensure that the head-end station is adequately ventilated. Do not cover the

ventilation slots.

• Beware of short circuits

• No liability is accepted for any damage caused by faulty connections or

inappropriate handling.

• Observe the relevant standards, regulations and guidelines on the installa-

tion and operation of antenna systems.

• The standards IEC/EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 must

be observed.

• For further information please read the assembly instructions for the head-

end station used.

• Test the software versions of the head-end station and the cassette and

update them if necessary. The current software versions can be found at

"www.mygss.eu".

Take action to prevent static discharge when working on the device!

Electronic devices should never be disposed of in the household rubbish. In

accordance with directive 2002/96/EC of the European Parliament and the

European Council from January 27, 2003 which addresses old electronic and

electrical devices, such devices must be disposed of at a designated collection

facility. At the end of its service life, please take your device to one of these

public collection facilities for proper disposal.

- 5 - PHDT 1000 H

2 general information

2.1 PaCki n g Co nt en ts

1 Cassette PHDT 1000 H

2 RF cables

1 Brief assembly instructions

1 Measuring log

2.2 mea n in g o f th e sym bo l s us ed

Important note

—> General note

• Performing works

2.3 teChn i C al data

The devices meet the following EU directives:

2011/65/EU, 2014/30/EU, 2014/35/EU

The product fulfils the guidelines and standards for CE labelling (page 48).

Unless otherwise noted all values are specified as "typical".

RF input

Frequency range: ....................................................... 925 … 2150 MHz

Level range: ............................................................ 60 dBμV … 80 dBμV

DVB-S modes: ............................................ QPSK

DVB-S2 modes: ...................QPSK

8PSK

Symbol rate DVB-S: .......................................... QPSK: 2 … 45 MSymb/s

Symbol rate DVB-S2: ........................................ QPSK: 10 … 30 MSymb/s

8PSK: 10 … 31 MSymb/s

DiSEqC control voltage (sound/DiSEqC) ............................

max. 65 mA

(switchable)

COFDM modulator

Signal processing: ......................................................... DIN EN 300744

Transmission modes: ................................................................2k, 4k, 8k

Types of modulation: ........................................ QPSK, 16 QAM, 64 QAM

Code rates: ............................................................

Guard intervals: .........................................................

- 6 - PHDT 1000 H

RF output

Frequency range: ............................................. 42.0 MHz … 860.0 MHz

Channels: ..........................................................C5 … C12, C21 … C69

Types of modulation: ........................................ QPSK, 16 QAM, 64 QAM

Output level: ............................................................................. 96 dBμV

Output impedance: ......................................................................... 75 Ω

ASI interfaces

Standard: .....................................................................DIN EN 50083-9

Format: ..............................................................MPEG ISO IEC 13818-1

Maximum data rate: .............................................................. 108 Mbit/s

Level (input / output): ..................................................... 800 mV

± 10%

Return loss (input):...............................................> 17 dB (5 … 270 MHz)

LAN interface

Standard: ............................................................................. 100-BASE-T

Control ...................................................................................... via UDP

Connections

SAT inputs: ............................................................................. 2 F sockets

RF output: ........................................................................... 1 IEC socket

ASI input: .................................................................1 BNC socket, 75 Ω

ASI output: ................................................................1 BNC socket, 75 Ω

LAN: ................................................................................ 1 RJ-45 socket

Connection strip (10-pin): ..................for supply voltages and control circuits

RS-232 socket: ..................................... serial interface for software update

Common Interface: ...........................several channels can be descrambled.

Remote maintenance

Remotely controllable (via PSW 1000*): .............................................. yes

(* and a corresponding management unit)

- 7 - PHDT 1000 H

2.4 de sC ri P tio n

The double transmodulator cassette is a converter, which converts all stations

modulated according to DVB-S /

DVB-S2

standard into two COFDM-modu-

lated signals according to DIN EN 300744 for feeding into a cable network.

DiSEqC

* control commands can be output via the SAT inputs.

The

cassette

has

two digital SAT IF inputs and one RF output. Additionally it is equipped with an

ASI input and an ASI output (ASI – Asynchronous Serial Interface acc. DIN EN

50083-9).

In addition, a CA module can be added to line A for descrambling scrambled

channels.

ge ner al

The control of the cassette takes place via the control unit of the head-end

station. After installation, some functions can be operated via UDP control

signals.

Two LEDs indicate if the respective channel strip is switched on (LED illumi-

nates) or off, and also provide an indication of the signal quality based on

their colour. Additionally the quality of the transport stream received is dis-

played ("CN…").

The RF output signals are sent through the RF output of the cassette to the output

collector. The common output level of the channel strips can be set at the output

collector. Additionally a transport stream is made available via the ASI output

dependent on the mode set.

When the head-end station is switched on, the two-line LC display shows the

software version of the control unit.

To operate this cassette the software version of the control unit must be "V 45"

or higher. You can find the current operating software for the control unit and

the cassette, the software "BE-Flash" and the current assembly instructions on

the website "www.mygss.eu".

The cassette is designed for use in head-end stations of the profi line.

- 8 - PHDT 1000 H

hotel m od es

The cassette is programmed for 5 special hotel applications (modes). The in-

dividual applications are operated via the LAN interface using UDP control

commands.

si ngl e se rv iC e

Here a service is generated for each line, service name and number are set

permanently. Additionally, the service can be controlled via UDP (LNC control

with H/V/22kHz, tone burst, DiSEqC

TM*

; the LNC voltage is sufficient for

control but not for supply).

Output is via the ASI output or the modulator.

The cassette is cascadable - two cassettes can be used to create an output

channel containing four services, each service being independently control-

lable.

sPl it au d i o

Basic function as for "Single Service". Services with multiple audio PIDs are

divided into individual services.

Example "Euronews" becomes "Euronews deu", "Euronews eng"…

Co m mo n Po rta l

Here, for example, a hotel information program that is the same for all rooms

is created (occupies one channel).

The service name can be set (e.g. "HOME")

Occupies a whole cassette. Line B is not used in this setting.

The content is fed in via the ASI input.

Pri vate Po rtal

Here, for example, a personal welcome screen is created for each room.

One service per room. Since each room requires its own video PID (approx.

800 kB/s), one channel can transmit approx. 20 services. More at lower data

rates.

The service name can be set (e.g. "GUEST").

The room number and the number can be entered for each line (e.g. room 1

number 20). The services 1...20 with the names "GUEST 1"... "GUEST 20".

One cassette can generate two channels, i.e. serve approx. 40 rooms (scal-

able).

The content is fed in via the ASI input.

- 9 - PHDT 1000 H

Paytv

Here, for example, a pay TV service is offered. One line can provide up to

100 rooms with one program.

The service name can be set (e.g. "PAY_A").

The room number and the number can be entered for each line (e.g. room 1

number 100). The services 1...100 with the names "PAY_A 1"... "PAY_A 100"

are created from this.

The common pay program and a common "empty program" (e.g. with instruc-

tions for activation) are fed in via the ASI input.

You can choose between the two programs via UDP broadcast.

One cassette can generate two channels, i.e. operate up to 200 rooms (scal-

able).

Co n tro l v ia udP

The following control commands are available:

Command Function

:part 0 Line A is selected (part 1 = line B)

:select 11955,27500,0x6D66 Service is selected (:select frequency, symbol rate, SID)

LNB Control

:lnb Hh 18V 22kHz without protocol

:lnb Vl 14V -

:lnb Hh,9750 LNB oscillator is set to 9750 MHz to calculate the input

frequency, otherwise automatically h=10600, l=9750

:lnb TAHh + Tone burst A

:lnb TBHh Tone burst B

:lnb D0Hh + DiSEqC

TM*

position 0

:lnb DFHh + DiSEqC

TM*

position 15

PayTV

:zimmer 45,PAY_A,1 switches PAY_A on for room 45

:zimmer 45,PAY_A,0 switches PAY_A off for room 45

:zimmeronly 45,PAY_A,1 only the entry for room 45 is created for a search run

:zimmeronly 45,PAY_A,0 reset ":zimmeronly 45,PAY_A,1"

Commands always start with ":" and are ended by "\n" ("\n" means Car-

riage Return <CR>).

Example: ":part 0\n:lnb D0Hh\n:select 11955,27500,0x6D66\n"

For line A, the LNB settings are set horizontally high to DiSEqC

TM*

position 0

with frequency 11955, symbol rate 27500 and SID 0x6D66.

*DiSEqC™ is a trademark of EUTELSAT

- 10 - PHDT 1000 H

2.5 so ft wa re q u ery

Control unit

If necessary, you can activate the indication of the software version of the

control unit manually:

• Press any two keys on the control unit of the head-end station simultaneously

until the display goes dark and the software version, e.g. "V 45" appears.

- 11 - PHDT 1000 H

3 assembly

3.1 in stal li n g th e Ca ss et te

– Ensure the head-end station is mounted so it will not be able to vibrate.

Avoid, for example, mounting the head-end station onto a lift shaft or any

other wall or floor construction that vibrates in a similar way.

– Before installing or changing a cassette unplug the power cable from the

mains power socket.

• Remove the fastening screws 1 of an unoccupied slot from the bracket of

the head-end station.

• Insert the cassette in this slot and push it into the housing.

• Align the cassette and apply slight pressure to connect it to the connections

of the board and the RF bus bar.

• Fasten the cassette with the screws 1.

- 12 - PHDT 1000 H

3.2 emC regu l ati ons

To comply with the current EMC regulations, it is necessary to connect the lines

leading in and out of the head-end station using cable terminals.

When mounting the cassette in a head-end station which is installed in a 19"

cabinet, make sure the connections leading in and out for the 19" cabinet are

made using cable terminals.

CLASS

KLASSE

The attenuation of shielding of the connection lines for ASI and antenna must

meet the requirements for "Class A".

• Insert the required number of cable terminals in the openings provided in

the head-end station or in the 19

cabinet.

Tighten the nuts on the cable terminals until the teeth on the lock washer have

penetrated the exterior coating and a good connection is made between the hous-

ing and cable terminals.

- 13 - PHDT 1000 H

3.3 Casset t e ov e rvi e w

1 D-SUB socket "RS 232"

2 Slot for CA module

3 ASI output

4 ASI input

5 LAN connector

6 SAT input (tuner "A")

7 Status LED of

channel strip

"A"

8 SAT input (tuner "B")

Status LED of channel strip "B"

The operating software of the cassette can be updated via the

9-pin D-SUB socket "RS 232" using a PC or notebook and the

software "BE-Flash". You can find the current operating software

on the website

"www.mygss.eu".

3.4 Con n eC ti n g th e C asse t te

•

Plug the SAT input cables into the SAT input sockets "

SAT input A

" 6 (chan-

nel strip "A") and "

SAT input B

" 8 (channel strip "B").

• Connect the ASI sockets 3 and 4.

• Connect the LAN connector 5 to the LAN network (for UDP control).

•

Connect the head-end station to the mains power supply.

- 14 - PHDT 1000 H

3.5 re tro fit tin g a Ca m o du l e

The cassette is equipped with a common interface. It allows you to connect a

CA module for various scrambling systems and service providers. Scrambled

channels can only be descrambled with a CA module suitable for the scram-

bling system and the corresponding smart card. The smart card contains all

the information for authorisation, descrambling and subscription.

Caution

– Check with the distributor or manufacturer of the CA module to be used

to ensure that it is suitable for de

scrambl

ing several channels.

– The hardware and software of this cassette have been thoroughly prepared

and tested.

– Any changes made by programme providers to the structures in the pro-

gramme data might impair or even prevent this function.

– When working with the CA module, please read the corresponding operat-

ing manual from the respective provider.

• Insert the smart card into the CA module so that the chip 3 on the smart

card 1 faces the thicker side (top) of the CA module 2.

• Insert the CA module into the slot 4 with the top side of the CA module

facing the RS-232 socket of the cassette.

• Push the CA module without canting into the guide rails of the CA slot 4

and contact it to the common interface.

34 12

- 15 - PHDT 1000 H

4 the Control Panel at a glanCe

4.1 men u it em s

Programme the

cassette

using the buttons on the control unit of the head-end

station. The two-line display of the control unit then shows the menus.

The parameters and functions to be set are underlined.

Use the key to select the following main menu items:

– Network settings

– Mode

– Output signal path

– Channel strip

– Selecting channel / frequency setting

– Output channel / output frequency

– Output level

– LNB oscillator frequency

– Input symbol rate

– Input frequency

– Station filter

– Transport stream and ORGNET-ID

– Hotel functions

– QAM modulation

– Stuffing

– Network Information Table (NIT)

– Factory reset

4.2 Con tr ol Pa n el

The key pad on the head-end station is used to scroll through the menus and

menu items one at a time:

scrolls forward through the menus.

select parameters in the menus.

set values, initiate actions.

selects sub-menus.

scrolls backward through the menus.

saves all entries

(in menu "DEFAULT" -> Factory reset).

BE-Remote V 45

PROFESSIONAL

- 16 - PHDT 1000 H

5 Programming

5.1 Pre Pa r at io n

• Connect the test receiver to the RF output or the test output of the head-end

station.

• Set the output channel / output frequency of the

cassette

(see page 26) and

adjust the TV test receiver to this channel.

•

Switch on the channel strip (modulator) if necessary (see page 28). For each

channel strip, there is a status LED which indicates if the channel strip is

switched on.

Status LED

Channel strip

"B"

Status LED

Channel strip

"A"

• Balance the output levels of the channel strips "A" and "B" if the difference

in level is ≥ 1 dB (page 28).

5.2

not es o n le vel s et tin g

In order to prevent interference within the head-end station and the cable sys-

tem, the output level of the cassette must be decreased by 10dB compared to

analogue cassettes at 64 QAM, and by 4 dB compared to analogue cassettes

at 256 QAM.

• Measure the output levels of the other cassettes and tune them to a uniform

output level using the appropriate level controls or software dependent on

the head-end station used. Please regard the assembly instructions of the

respective head-end station.

- 17 - PHDT 1000 H

5.3 Pro gr a m m in g Pr oC e du r e

nur wenn: ROUTE = Modulator

only if: ROUTE = Modulator

nur wenn: ROUTE = Modulator

only if: ROUTE = Modulator

nur wenn: MODE = Single Service

oder

Split Audio

only if: MODE = Single Service

Split Audio

nur wenn: MODE = PayTv

only if: MODE = PayTv

nur wenn: MODE = Private Portal

oder PayTv

only if: MODE = Private Portal

or PayTv

nur wenn: MODE = Single Service

oder Split Audio oder Common Portal

only if: MODE = Single Service

or Split Audio or Common Portal

nur wenn: MODE = Private Portal

only if: MODE = Private Portal

NICHT wenn:

MODE = Private Portal

NOT if:

MODE = Private Portal

Bx 4A/B

Freq.

OUTPUT

Channel / Freq.

Bx 4A/B

850.00 MHz

OUTPUT

Bx 4A/B

27500

SYMBOL

DVB-S

Bx 4A/B

11835 -0.7

FREQ

CN 15

on / off

▶

◀

▶

◀

Bx 4A/B

-3 dB

LEVEL

Bx 4A/B

10600 MHz

LNB

off

0 … -10 dB

Bx 4A/B

15.3 dB

C/N

(+ 11.3) OK

Anzeige: Signalqualität

Display: Signal quality

DVB-S / DVB-S 2 …

▶

◀

Bx 4A/B

off

NIT

=> Make

Bx 4A/B

0x0001 0x0100

TS/ONID

FREE – –/00

Bx 4A ROOM/COUNT

0000 000

Bx 4A

0x0000 /

VID/AUDPID

0x0000

Bx 4A/B

PRG–NUM

(0x0020…)

Bx 4A/B

HOTEL 1

NAME

▶

◀

▶

on / off Make

nur wenn: ROUTE = ASI

only if: ROUTE = ASI

Bx 4

Line A <=

LINE

=> Line B

Line A / Line B

Ein / On

BE–Remote

please wait …

V 45

Box 4

V 39 C

DVBS2-HOT

COFDM - - -

t > 10 s

Bx 4

Modulator

ROUTE

ASI

Bx 4

Single Service

MODE

Split Audio

Common Portal

Private Portal

PayTv

Bx 4

108000 KBits

ASI RATE

188 / 204

positive / negativ

continuous / burst

Bx 4

188 pos. cont.

ASI OPTION

Bx 1A

C5-12,S3-24

TWIN-SAT

C07

Böx 4

C5-12,S3-24

TWIN-SAT

C07

Box 5

..............

Box …

………

……

Bx 4

off =>

ETHERNET

Options

stat / DHCP

Bx 4

192.168. 0. 1

IP-GATEWAY

Bx 4

255.255.255. 0

IP-MASK

▶

◀

Bx 4

192.168. 0.128

IP-ADDR

▶

◀

▶

◀

Bx 4

60000

UDP-PORT

▶

◀

▶

0 … 65535

▶

Bx 4

Defaults

FACTORY

Bx 4

STORE

FACTORY

=> M

speichern / store

auf Werkseinstellung

zurücksetzen und speichern

reset to factory defaults

and store

Bx 4

RESET

=> M

Cassette resetten

reset cassette

Bedienhinweise

"blättert" Menüs vorwärts.

"blättert" Menüs rückwärts.

wählen die Eingabeposition

wählt Untermenü

stellen Werte ein,.

speichert alle Eingaben.

1 zeigt die Eingabeposition

Operating Hints

scrolls forward through the menu.

scrolls backward through the menu.

select the enter position.

selects a submenu.

set values and triggers actions.

saves all entries.

1 shows the enter position

off / abcd

a = T (Ton/sound) / D (Diseq)

b = A,B / 0…15 (0…F hex)

c = H / V (horizontal / vertical)

d = h / l (high / low)

01/06Bx 4A TV

Das Erste

– –/06Bx 4A

SAT ASI

Bezahl-Programm wählen

Select pay channel

Freies Programm wählen

Select free channel

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

nur wenn: MODE = Single Service oder Split Audio

only if: MODE = Single Service or Split Audio

Bx 4A/B

8MHz QAM64

COFDM-MODE

POS

5…8MHz

QPSK…QAM64

positiv / negativ

positive / negative

Bx 4A/B

2k C7/8

COFDM-MODE

G1/32

2 … 8k

C1/2 … C7/8

G1/4 … G 1/32

Bx 4A/B

CELL 0x0000

COFDM TPS

off

0x0000 … 0xFFFF

on / off

Bx 4A/B

SR=6900 (6325)

STUFFING

▶

◀

Page 19

- 18 - PHDT 1000 H

nur wenn: ROUTE = Modulator

only if: ROUTE = Modulator

nur wenn: ROUTE = Modulator

only if: ROUTE = Modulator

nur wenn: MODE = Single Service

oder

Split Audio

only if: MODE = Single Service

Split Audio

nur wenn: MODE = PayTv

only if: MODE = PayTv

nur wenn: MODE = Private Portal

oder PayTv

only if: MODE = Private Portal

or PayTv

nur wenn: MODE = Single Service

oder Split Audio oder Common Portal

only if: MODE = Single Service

or Split Audio or Common Portal

nur wenn: MODE = Private Portal

only if: MODE = Private Portal

NICHT wenn:

MODE = Private Portal

NOT if:

MODE = Private Portal

Bx 4A/B

Freq.

OUTPUT

Channel / Freq.

Bx 4A/B

850.00 MHz

OUTPUT

Bx 4A/B

27500

SYMBOL

DVB-S

Bx 4A/B

11835 -0.7

FREQ

CN 15

on / off

▶

◀

▶

◀

Bx 4A/B

-3 dB

LEVEL

Bx 4A/B

10600 MHz

LNB

off

0 … -10 dB

Bx 4A/B

15.3 dB

C/N

(+ 11.3) OK

Anzeige: Signalqualität

Display: Signal quality

DVB-S / DVB-S 2 …

▶

◀

Bx 4A/B

off

NIT

=> Make

Bx 4A/B

0x0001 0x0100

TS/ONID

FREE – –/00

Bx 4A ROOM/COUNT

0000 000

Bx 4A

0x0000 /

VID/AUDPID

0x0000

Bx 4A/B

PRG–NUM

(0x0020…)

Bx 4A/B

HOTEL 1

NAME

▶

◀

▶

on / off Make

nur wenn: ROUTE = ASI

only if: ROUTE = ASI

Bx 4

Line A <=

LINE

=> Line B

Line A / Line B

Ein / On

BE–Remote

please wait …

V 45

Box 4

V 39 C

DVBS2-HOT

COFDM - - -

t > 10 s

Bx 4

Modulator

ROUTE

ASI

Bx 4

Single Service

MODE

Split Audio

Common Portal

Private Portal

PayTv

Bx 4

108000 KBits

ASI RATE

188 / 204

positive / negativ

continuous / burst

Bx 4

188 pos. cont.

ASI OPTION

Bx 1A

C5-12,S3-24

TWIN-SAT

C07

Böx 4

C5-12,S3-24

TWIN-SAT

C07

Box 5

..............

Box …

………

……

Bx 4

off =>

ETHERNET

Options

stat / DHCP

Bx 4

192.168. 0. 1

IP-GATEWAY

Bx 4

255.255.255. 0

IP-MASK

▶

◀

Bx 4

192.168. 0.128

IP-ADDR

▶

◀

▶

◀

Bx 4

60000

UDP-PORT

▶

◀

▶

0 … 65535

▶

Bx 4

Defaults

FACTORY

Bx 4

STORE

FACTORY

=> M

speichern / store

auf Werkseinstellung

zurücksetzen und speichern

reset to factory defaults

and store

Bx 4

RESET

=> M

Cassette resetten

reset cassette

Bedienhinweise

"blättert" Menüs vorwärts.

"blättert" Menüs rückwärts.

wählen die Eingabeposition

wählt Untermenü

stellen Werte ein,.

speichert alle Eingaben.

1 zeigt die Eingabeposition

Operating Hints

scrolls forward through the menu.

scrolls backward through the menu.

select the enter position.

selects a submenu.

set values and triggers actions.

saves all entries.

1 shows the enter position

off / abcd

a = T (Ton/sound) / D (Diseq)

b = A,B / 0…15 (0…F hex)

c = H / V (horizontal / vertical)

d = h / l (high / low)

01/06Bx 4A TV

Das Erste

– –/06

Bx 4A

SAT ASI

Bezahl-Programm wählen

Select pay channel

Freies Programm wählen

Select free channel

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

nur wenn: MODE = Single Service oder Split Audio

only if: MODE = Single Service or Split Audio

Bx 4A/B

8MHz QAM64

COFDM-MODE

POS

5…8MHz

QPSK…QAM64

positiv / negativ

positive / negative

Bx 4A/B

2k C7/8

COFDM-MODE

G1/32

2 … 8k

C1/2 … C7/8

G1/4 … G 1/32

Bx 4A/B

CELL 0x0000

COFDM TPS

off

0x0000 … 0xFFFF

on / off

Bx 4A/B

SR=6900 (6325)

STUFFING

▶

◀

Page 19

- 19 - PHDT 1000 H

nur wenn: ROUTE = Modulator

only if: ROUTE = Modulator

nur wenn: ROUTE = Modulator

only if: ROUTE = Modulator

nur wenn: MODE = Single Service

oder

Split Audio

only if: MODE = Single Service

Split Audio

nur wenn: MODE = PayTv

only if: MODE = PayTv

nur wenn: MODE = Private Portal

oder PayTv

only if: MODE = Private Portal

or PayTv

nur wenn: MODE = Single Service

oder Split Audio oder Common Portal

only if: MODE = Single Service

or Split Audio or Common Portal

nur wenn: MODE = Private Portal

only if: MODE = Private Portal

NICHT wenn:

MODE = Private Portal

NOT if:

MODE = Private Portal

Bx 4A/B

Freq.

OUTPUT

Channel / Freq.

Bx 4A/B

850.00 MHz

OUTPUT

Bx 4A/B

27500

SYMBOL

DVB-S

Bx 4A/B

11835 -0.7

FREQ

CN 15

on / off

▶

◀

▶

◀

Bx 4A/B

-3 dB

LEVEL

Bx 4A/B

10600 MHz

LNB

off

0 … -10 dB

Bx 4A/B

15.3 dB

C/N

(+ 11.3) OK

Anzeige: Signalqualität

Display: Signal quality

DVB-S / DVB-S 2 …

▶

◀

Bx 4A/B

off

NIT

=> Make

Bx 4A/B

0x0001 0x0100

TS/ONID

FREE – –/00

Bx 4A ROOM/COUNT

0000 000

Bx 4A

0x0000 /

VID/AUDPID

0x0000

Bx 4A/B

PRG–NUM

(0x0020…)

Bx 4A/B

HOTEL 1

NAME

▶

◀

▶

on / off Make

nur wenn: ROUTE = ASI

only if: ROUTE = ASI

Bx 4

Line A <=

LINE

=> Line B

Line A / Line B

Ein / On

BE–Remote

please wait …

V 45

Box 4

V 39 C

DVBS2-HOT

COFDM - - -

t > 10 s

Bx 4

Modulator

ROUTE

ASI

Bx 4

Single Service

MODE

Split Audio

Common Portal

Private Portal

PayTv

Bx 4

108000 KBits

ASI RATE

188 / 204

positive / negativ

continuous / burst

Bx 4

188 pos. cont.

ASI OPTION

Bx 1A

C5-12,S3-24

TWIN-SAT

C07

Böx 4

C5-12,S3-24

TWIN-SAT

C07

Box 5

..............

Box …

………

……

Bx 4

off =>

ETHERNET

Options

stat / DHCP

Bx 4

192.168. 0. 1

IP-GATEWAY

Bx 4

255.255.255. 0

IP-MASK

▶

◀

Bx 4

192.168. 0.128

IP-ADDR

▶

◀

▶

◀

Bx 4

60000

UDP-PORT

▶

◀

▶

0 … 65535

▶

Bx 4

Defaults

FACTORY

Bx 4

STORE

FACTORY

=> M

speichern / store

auf Werkseinstellung

zurücksetzen und speichern

reset to factory defaults

and store

Bx 4

RESET

=> M

Cassette resetten

reset cassette

Bedienhinweise

"blättert" Menüs vorwärts.

"blättert" Menüs rückwärts.

wählen die Eingabeposition

wählt Untermenü

stellen Werte ein,.

speichert alle Eingaben.

1 zeigt die Eingabeposition

Operating Hints

scrolls forward through the menu.

scrolls backward through the menu.

select the enter position.

selects a submenu.

set values and triggers actions.

saves all entries.

1 shows the enter position

off / abcd

a = T (Ton/sound) / D (Diseq)

b = A,B / 0…15 (0…F hex)

c = H / V (horizontal / vertical)

d = h / l (high / low)

01/06Bx 4A TV

Das Erste

– –/06Bx 4A

SAT ASI

Bezahl-Programm wählen

Select pay channel

Freies Programm wählen

Select free channel

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

▶

◀

nur wenn: MODE = Single Service oder Split Audio

only if: MODE = Single Service or Split Audio

Bx 4A/B

8MHz QAM64

COFDM-MODE

POS

5…8MHz

QPSK…QAM64

positiv / negativ

positive / negative

Bx 4A/B

2k C7/8

COFDM-MODE

G1/32

2 … 8k

C1/2 … C7/8

G1/4 … G 1/32

Bx 4A/B

CELL 0x0000

COFDM TPS

off

0x0000 … 0xFFFF

on / off

Bx 4A/B

SR=6900 (6325)

STUFFING

▶

◀

Page 17

Page 18

- 20 - PHDT 1000 H

5.4 Pro gr amm i n g th e Cass et te

—> Pressing the button for longer than 2 seconds cancels the

programming procedure. This takes you back to the programme

item "Selecting the cassette" from any menu. Any entries that have

not been saved are reset to the previous settings.

—> Entries in the menus can be saved by pressing the key. You are

taken back to the "Selecting the cassette" menu item.

—> Whether individual menus are displayed depends on the settings in

the "MODE" and/or "ROUTE" menus. Please refer to the program-

ming procedure on page 17.

• Switch on the head-end station

—> The display shows the software version (e.g. V 45)

—> The processor reads the

cassettes

‘ data (approximately 10 sec-

onds).

Ein / On

BE–Remote

please wait …

V 45

t > 10 s

se leCtin g th e C as se t te

Box 4

V 39

DVBS2-HOT

– – –

Bx 1A

C5-12,S3-24

TWIN-SAT

C07

Böx 4

C5-12,S3-24

TWIN-SAT

C07

Box 5

..............

Box …

………

……

• Select the

cassette

you want to programme (e.g. Box 4) by repeatedly press-

ing the button if necessary.

—> The display shows e.g. the menu

Box 4 DVBS2-HOT

V39

"Box 4" stands for

slot

"DVBS2-HOT" Type of cassette

"V 39" Software version of the cassette

• Press the button.

Page is loading ...

GSS PHDT 1000 H Assembly Instruction Manual

GSS PHDT 1000 H Assembly Instruction Manual

GSS PHDT 1000 H Assembly Instruction Manual

Related papers

Other documents