GSS SDSP 912 is a multiswitch with 8 SAT IF inputs, an active terrestrial input, and 12 receiver outputs. It is designed for single satellite reception and can be cascaded to expand the number of outputs. The active terrestrial input can be attenuated by up to 10 dB and can be switched to passive mode to allow for return-channel applications. The multiswitch has a 22-kHz signal generator for controlling Quad LNBs with integrated multiswitches. It provides excellent isolation and low insertion loss, ensuring high-quality signal distribution.
GSS SDSP 912 is a multiswitch with 8 SAT IF inputs, an active terrestrial input, and 12 receiver outputs. It is designed for single satellite reception and can be cascaded to expand the number of outputs. The active terrestrial input can be attenuated by up to 10 dB and can be switched to passive mode to allow for return-channel applications. The multiswitch has a 22-kHz signal generator for controlling Quad LNBs with integrated multiswitches. It provides excellent isolation and low insertion loss, ensuring high-quality signal distribution.
INSTALLATION
EQUIPMENT
PROGRAMME
2012/2013
2
INDEX
Order processing:
Bettina Wilmerstadt
Phone: +49/9 11/7 03 - 72 09
Fax: +49/9 11/7 03 - 92 10
Email: bettina.wilmerst[email protected]
Service:
Margareta Kiss
Phone: +49/9 11/7 03 - 22 21
Fax: +49/9 11/7 03 - 23 26
Email: ser[email protected]
Editorial 3
Standard Multiswitches for Single Systems 4
Cascadable Standard Multiswitches 8
Cascadable Multiswitches Unicable 16
Professional Multiswitches for Single Systems 18
Cascadable Professional Multiswitches 20
Power Supply Concept 24
Amplifi ers 25
Accessories 28
DiSEqC Multiswitches 30
Wideband Amplifi ers 32
Taps and Splitters 34
Antenna Outlets and Accessories 36
Dish Antennas and Accessories 38
LNBs 39
Installation Material 40
3
You will fi nd every product for the installation of Broadband communication
and SAT IF networks in this catalogue. Beginning with the satellite antenna
with the corresponding LNB further to every necessary component of the
satellite IF distribution equipment to the point of wall outlet - everything from
one source. There are every necessary components for the range of broadband
communication installation equipment after the feed-in of the corresponding
signal - this equipment consists of broadband communication amplifi ers, taps
and splitters and wall outlets. There is the suitable product for every
application.
Two new multiswitches in the range of satellite IF distribution are added.
There are a 24 and a 32 output multiswitch version with 16 satellite inputs
and 1 terrestrial input. These multiswitches are featured with the well-known
advantages of the current multiswitch portfolio: low power consumption and
fi rst-class isolation values.
For the fi rst time you will fi nd for the most of the products a QR code.
You can get to the relevant product site on our homepage and download e.g.
the manual or assembly instruction for this product.
We are sure that you can equip your distribution network with every necessary
components from GSS.
On behalf of the Board of Directors
Fred Huebner
4
SDSP 504 SDSP 506 SDSP 508 SDSP 512 SDSP 516
No. of SAT inputs 44444
No. of terrestrial inputs 11111
No. of outputs 4681216
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz (if TERR is passive!)
22-kHz generator • • • • •
Tap loss SAT
TERR (passive)
1 dB
12 dB
1 dB
15 dB
1 dB
15 dB
3 dB
18 dB
3 dB
18 dB
Distribution TERR (active) 3 dB 0 dB 0 dB -3 dB -3 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 12 dB 15 dB 15 dB 18 dB 18 dB
Output level SAT
TERR
max. 101 dBμV
max. 97 dBμV
Noise fi gure SAT
TERR
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
Feeding for receiver < 65 mA < 65 mA < 65 mA < 65 mA < 65 mA
Power consumption without LNB 4.7 W 4.7 W 4.7 W 4.7 W 4.7 W
Mains voltage 100 – 230 V AC, 50/60 Hz
Dimensions in mm 225x125x60 225x125x60 225x125x60 225x215x60 225x215x60
5 inputs
Multiswitches with 4 SAT IF inputs and one active terrestrial input.
The latter can be attenuated by up to 10 dB and also switched to
passive stage which allows return-channel applications.
A 22-kHz signal generator can be switched on for controlling
Quad LNBs with integrated multiswitch.
5
SDSP 904 SDSP 906 SDSP 908 SDSP 912 SDSP 916 SDSP 924 SDSP 932
No. of SAT inputs 8888888
No. of terrestrial inputs 1111111
No. of outputs 46812162432
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz (if TERR is passive!)
22-kHz generator •••••••
Tap loss SAT
TERR (passive)
3 dB
12 dB
3 dB
15 dB
3 dB
15 dB
5 dB
18 dB
5 dB
18 dB
0 dB
28 dB
0 dB
28 dB
Distribution TERR (active) 3 dB 0 dB 0 dB -3 dB -3 dB 0 dB 0 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 12 dB 15 dB 15 dB 18 dB 18 dB 28 dB 28 dB
Output level SAT
TERR
max. 101 dBμV
max. 97 dBμV
max. 95 dBμV
max. 95 dBμV
Noise fi gure SAT
TERR
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
7 dB
8 dB
7 dB
8 dB
Feeding for receiver < 65 mA < 65 mA < 65 mA < 65 mA < 65 mA < 30 mA < 30 mA
Power consumption without LNB 4.7 W 4.7 W 4.7 W 4.7 W 4.7 W 9 W 9 W
Mains voltage 100 – 230 V AC, 50/60 Hz
Dimensions in mm
260x125x60 260x125x60 260x125x60 260x215x60 260x215x60 185x290x60 185x290x60
9 inputs
Multiswitches with 8 SAT IF inputs and one active terrestrial input.
The latter can be attenuated by up to 10 dB and also switched to
passive stage which allows return-channel applications.
A 22-kHz signal generator can be switched on for controlling
Quad LNBs with integrated multiswitch.
STANDARD MULTISWITCHES
FOR SINGLE SYSTEMS
6
SDSP 1308 SDSP 1312 SDSP 1316
No. of SAT inputs 12 12 12
No. of terrestrial inputs 1 1 1
No. of outputs 8 12 16
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz (if TERR is passive!)
22-kHz generator — — —
Tap loss SAT
TERR (passive)
5 dB
15 dB
7 dB
18 dB
7 dB
18 dB
Distribution TERR (active) 0 dB -3 dB -3 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 15 dB 18 dB 18 dB
Output level SAT
TERR
max. 101 dBμV
max. 97 dBμV
Noise fi gure SAT
TERR
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
Feeding for receiver < 65 mA < 65 mA < 65 mA
Power consumption
without LNB
3.5 W 3.5 W 3.5 W
Mains voltage 100 – 230 V AC, 50/60 Hz
Dimensions in mm 340 x 125 x 60 340 x 215 x 60 340 x 215 x 60
13 inputs
Multiswitches with 12 SAT IF inputs and one active terrestrial input.
The latter can be attenuated by up to 10 dB and also switched to
passive stage which allows return-channel applications.
7
SDSP 1708 SDSP 1712 SDSP 1716 SDSP 1724 SDSP 1732
No. of SAT inputs 16 16 16 16 16
No. of terrestrial inputs 11111
No. of outputs 8 12 16 24 32
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz (if TERR is passive!)
22-kHz generator — — — — —
Tap loss SAT
TERR (passive)
5 dB
15 dB
7 dB
18 dB
7 dB
18 dB
0 dB
28 dB
0 dB
28 dB
Distribution TERR (active) 0 dB -3 dB -3 dB 0 dB 0 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 15 dB 18 dB 18 dB 28 dB 28 dB
Output level SAT
TERR
max. 101 dBμV
max. 97 dBμV
max. 95 dBμV
max. 95 dBμV
Noise fi gure SAT
TERR
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
7 dB
8 dB
7 dB
8 dB
Feeding for receiver < 65 mA < 65 mA < 65 mA < 30 mA < 30 mA
Power consumption
without LNB
3.5 W 3.5 W 3.5 W 9 W 9 W
Mains voltage 100 – 230 V AC, 50/60 Hz
Dimensions in mm 340 x 125 x 60 340 x 215 x 60 340 x 215 x 60 220 x 290 x 60 220 x 290 x 60
17 inputs
Multiswitches with 16 SAT IF inputs and one active terrestrial input.
The latter can be attenuated by up to 10 dB and also switched to
passive stage which allows return-channel applications.
STANDARD MULTISWITCHES
FOR SINGLE SYSTEMS
8
Satellite installation for digital and analogue
reception of one satellite (e.g. ASTRA 19.2°)
with terrestrial feed for up to 32 participants.
The power supply unit can fl exibly connected
to any of the three multiswitches.
9
SDC 504 SDC 508 SDC 516
No. of SAT inputs 4 4 4
No. of terrestrial inputs 1 1 1
No. of loop-through outputs 5 5 5
No. of receiver outputs 4 8 16
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator • • •
Through loss SAT
TERR
2 dB
2 dB
2 dB
2 dB
4 dB
4 dB
Tap loss SAT
TERR
1 dB
20 dB
1 dB
23 dB
3 dB
25 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 20 dB 23 dB 25 dB
Output level SAT
TERR
max. 101 dBμV
passive
Noise fi gure SAT
TERR
7 dB
passive
7 dB
passive
7 dB
passive
Feeding for receiver < 65 mA < 65 mA < 65 mA
Power consumption
without LNB
1.5 W 1.5 W 1.5 W
Mains voltage via SDP 900
Dimensions in mm 125x135x60 125x135x60 125x225x60
5 inputs
The cascadable multiswitch system consists of components with
loop-through outputs and terminal units to be installed at the end
of the distribution. The multiswitches with 4 SAT IF inputs have an
additional passive terrestrial input which is capable for return-channel
signals. A 22-kHz signal generator can be switched on for controlling
Quad LNBs with integrated multiswitch.
CASCADABLE
STANDARD MULTISWITCHES
10
Satellite installation for digital and analogue
reception of two satellites (e.g. ASTRA 19.2°
and Eutelsat 13°) with terrestrial feed for up
to 76 participants. The input signals are fed
via a SAT IF amplifi er.
11
SDC 904 SDC 906 SDC 908 SDC 912 SDC 916
No. of SAT inputs 8 8 8 8 8
No. of terrestrial inputs 1 1 1 1 1
No. of loop-through outputs 9 9 9 9 9
No. of receiver outputs 4 6 8 12 16
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator • • • • •
Through loss SAT
TERR
2 dB
2 dB
2 dB
2 dB
2 dB
2 dB
4 dB
4 dB
4 dB
4 dB
Tap loss SAT
TERR
3 dB
20 dB
3 dB
23 dB
3 dB
23 dB
5 dB
25 dB
5 dB
25 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 20 dB 23 dB 23 dB 25 dB 25 dB
Output level SAT
TERR
max. 101dBμV
passive
Noise fi gure SAT
TERR
7 dB
passive
7 dB
passive
7 dB
passive
7 dB
passive
7 dB
passive
Feeding for receiver < 65 mA < 65 mA < 65 mA < 65 mA < 65 mA
Power consumption without LNB 1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
Mains voltage via SDP 900 via SDP 900 via SDP 900 via SDP 900 via SDP 900
Dimensions in mm 160x135x60 160x135x60 160x135x60 160x225x60 160x225x60
9 inputs
The cascadable multiswitch system consists of components with
loop-through outputs and terminal units to be installed at the end of
the distribution. The multiswitches with 8 SAT IF inputs have an
additional passive terrestrial input which is capable for return-channel
signals. A 22-kHz signal generator can be switched on for controlling
Quad LNBs with integrated multiswitch.
CASCADABLE
STANDARD MULTISWITCHES
12
Satellite installation for digital and analogue
reception of up to three satellites (e.g. ASTRA 19.2°,
Eutelsat 13° and Turksat) with terrestrial feed for up
to 72 participants. The input signals are fed via two
SAT IF amplifi ers.
13
SDC 1308 SDC 1312 SDC 1316
No. of SAT inputs 12 12 12
No. of terrestrial inputs 1 1 1
No. of loop-through outputs 13 13 13
No. of receiver outputs 8 12 16
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator — — —
Through loss SAT
TERR
2 dB
2 dB
4 dB
4 dB
4 dB
4 dB
Tap loss SAT
TERR
5 dB
23 dB
7 dB
25 dB
7 dB
25 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 23 dB 25 dB 25 dB
Output level SAT
TERR
max. 101dBμV
passive
max. 101dBμV
passive
max. 101dBμV
passive
Noise fi gure SAT
TERR
7 dB
passive
7 dB
passive
7 dB
passive
Feeding for receiver < 65 mA < 65 mA < 65 mA
Power consumption
without LNB
1.5 W 1.5 W 1.5 W
Mains voltage via SDP 1700 via SDP 1700 via SDP 1700
Dimensions in mm 240 x 135 x 60 240 x 225 x 60 240 x 225 x 60
13 inputs
The cascadable multiswitch system consists of components with
loop-through outputs and terminal units to be installed at the
end of the distribution. The multiswitches with 12 SAT IF inputs
have an additional passive terrestrial input which is capable for
return-channel signals.
CASCADABLE
STANDARD MULTISWITCHES
14
Satellite installation for digital and
analogue reception of up to four
satellites (e.g. ASTRA 19.2°,
ASTRA 23.5°, Eutelsat 13° and
Turksat) with terrestrial feed for up
to 36 participants. The power supply
unit can fl exibly connected to any
of the three multiswitches.
15
SDC 1708 SDC 1712 SDC 1716
No. of SAT inputs 16 16 16
No. of terrestrial inputs 1 1 1
No. of loop-through outputs 17 17 17
No. of receiver outputs 8 12 16
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator — — —
Through loss SAT
TERR
2 dB
2 dB
4 dB
4 dB
4 dB
4 dB
Tap loss SAT
TERR
5 dB
23 dB
7 dB
25 dB
7 dB
25 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 23 dB 25 dB 25 dB
Output level SAT
TERR
max. 101dBμV
passive
max. 101dBμV
passive
max. 101dBμV
passive
Noise fi gure SAT
TERR
7 dB
passive
7 dB
passive
7 dB
passive
Feeding for receiver < 65 mA < 65 mA < 65 mA
Power consumption without
LNB
1.5 W 1.5 W 1.5 W
Mains voltage via SDP 1700 via SDP 1700 via SDP 1700
Dimensions in mm 240 x 135 x 60 240 x 225 x 60 240 x 225 x 60
17 inputs
The cascadable multiswitch system consists of components with
loop-through outputs and terminal units to be installed at the end
of the distribution. The multiswitches with 16 SAT IF inputs have an
additional passive terrestrial input which is capable for return-channel
signals.
CASCADABLE
STANDARD MULTISWITCHES
16
1 - 8
1 - 4
1 - 4
SRS 205
Satellite installation for digital reception of one
satellite (e.g. ASTRA 19.2°) with terrestrial feed
for up to 16 participants with receiver which
support the Unicable standard.
The power supply unit can fl exibly connected to
any of the both multiswitches.
17
SDUC 502 SDUC 902
No. of SAT inputs
48
No. of terrestrial inputs
11
No. of loop-through outputs
59
Output frequencies
output 1/chanel ID
1284 MHz / 0
1400 MHz / 1
1516 MHz / 2
1632 MHz / 3
Output frequencies
output 2/channel ID
1748 MHz / 4
1864 MHz / 5
1980 MHz / 6
2096 MHz / 7
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator
••
Through loss SAT
TERR
2 dB
3.5 dB
2 dB
3.5 dB
Tap loss TERR (passive) 10 dB 10 dB
Gain SAT 14 dB 14 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
Return-channel loss TERR 10 dB 10 dB
Feeding for receiver
< 30 mA < 30 mA
Power consumption
without LNB
7 W 7 W
Mains voltage
via SDP 900
Dimensions in mm
135 x 160 x 60 135 x 160 x 60
Cascadable multiswitches Unicable
The cascadable multiswitch system unicable con-
sists of satellite and terrestrial inputs as well as
loop-through outputs. An optional switching power
supply can be used for low current consumption
and noise-free transmission of the signals.
A 22-kHz signal generator can be switched on for
controlling Quad LNBs with integrated multiswitch.
The terrestrial input is suitable for return-path
signals.
Both outputs can be combined with the splitter
SRS 205 for creating a rope for 8 receivers.
CASCADABLE
MULTISWITCHES UNICABLE
18
PDSP 504 PDSP 506 PDSP 508
No. of SAT inputs 4 4 4
No. of terrestrial inputs 1 1 1
No. of outputs 4 6 8
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator • • •
Tap loss SAT
TERR (passive)
0 dB
17 dB
0 dB
17 dB
0 dB
17 dB
Gain TERR (active) 0 dB 0 dB 0 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 17 dB 17 dB 17 dB
Output level SAT
TERR
max. 101 dBμV
max. 97 dB
Noise fi gure SAT
TERR
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
Feeding for receiver < 65 mA < 65 mA < 65 mA
Power consumption without LNB 4.7 W 4.7 W 4.7 W
Mains voltage 100 – 230 V AC / 50/60 Hz
Dimensions in mm 230 x 133 x 55 230 x 133 x 55 230 x 133 x 55
5 inputs
Multiswitches with 4 SAT IF inputs and one active terrestrial input.
The latter can be attenuated by up to 10 dB and also switched to passive
stage with allows return-path applications. A 22-kHz signal generator can
be switched on for controlling Quad LNBs with integrated multiswitch.
19
PDSP 904 PDSP 906 PDSP 908
No. of SAT inputs 8 8 8
No. of terrestrial inputs 1 1 1
No. of outputs 4 6 8
Frequency range SAT
TERR
RETURN CHANNEL
950 – 2200 MHz
87 – 862 MHz
5 – 65 MHz
22-kHz generator • • •
Tap loss SAT
TERR (passive)
0 dB
17 dB
0 dB
17 dB
0 dB
17 dB
Gain TERR (active) 0 dB 0 dB 0 dB
Isolation Hor./Vert.
SAT/TERR
Port/Port
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
> 30 dB
> 25 dB
> 20 dB
Return loss SAT
TERR
10 dB
10 dB
10 dB
10 dB
10 dB
10 dB
Return-channel loss 17 dB 17 dB 17 dB
Output level SAT
TERR
max. 101 dBμV
max. 97 dB
Noise fi gure SAT
TERR
7 dB
6 dB
7 dB
6 dB
7 dB
6 dB
Feeding for receiver < 65 mA < 65 mA < 65 mA
Power consumption without LNB 4.7 W 4.7 W 4.7 W
Mains voltage 100 – 230 V AC / 50/60 Hz
Dimensions in mm 230 x 133 x 55 230 x 133 x 55 230 x 133 x 55
9 inputs
Multiswitches with 8 SAT IF inputs and one active terrestrial input.
The latter can be attenuated by up to 10 dB and also switched to
passive stage with allows return-path applications. A 22-kHz signal
generator can be switched on for controlling Quad LNBs with
integrated multiswitch.
PROFESSIONAL MULTISWITCHES
FOR SINGLE SYSTEMS
20
Satellite installation for digital and analogue
reception of one satellite (e.g. ASTRA 19.2°)
with terrestrial feed for up to 18 participants.
The power supply unit can fl exibly connected
to any of the three multiswitches.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
GSS SDSP 912 Datasheet
- Category
- Satellite antennas
- Type
- Datasheet
GSS SDSP 912 is a multiswitch with 8 SAT IF inputs, an active terrestrial input, and 12 receiver outputs. It is designed for single satellite reception and can be cascaded to expand the number of outputs. The active terrestrial input can be attenuated by up to 10 dB and can be switched to passive mode to allow for return-channel applications. The multiswitch has a 22-kHz signal generator for controlling Quad LNBs with integrated multiswitches. It provides excellent isolation and low insertion loss, ensuring high-quality signal distribution.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
