Grace Company The Q'nique Frame Operating instructions

Brand
Grace Company
Model
The Q'nique Frame
Type
Operating instructions

This manual is also suitable for

Frame Instructions
Quilt Frame Assembly Instructions
1
Table of Contents
Warranty
....................................................................................................................................2
Box 1 Components ......................................................................................................................3
Box 1 Inner Box 1 Components ....................................................................................................3
Box 1 Inner Box 2 Components ....................................................................................................4
Box 1 Inner Box 3 Hardware Box (Tools Provided) .........................................................................4
Box 1 Inner Box 3 Hardware Box Continued .................................................................................. 5
Box 2 Components ......................................................................................................................5
Leveling Foot Attachment to Frame Legs .......................................................................................6
Leg Height Adjustment Chart .......................................................................................................6
Leg Height Adjustment ................................................................................................................7
Table Assembly ...........................................................................................................................9
Table Braces .............................................................................................................................10
Track Assembly ......................................................................................................................... 11
Track Assembly Attachment .......................................................................................................12
Rail Holder Assembly Attachment ............................................................................................... 13
Geared Rail Assembly ................................................................................................................ 14
Geared Rail Assembly with Handwheel ........................................................................................15
Rail Attachment.........................................................................................................................16
Bottom Carriage Adjustment ...................................................................................................... 16
Putting the Machine onto the Frame ........................................................................................... 18
Completed Frame Example View .................................................................................................18
Ratchet Use ..............................................................................................................................19
Leveling Foot Adjustment ...........................................................................................................19
Leader Cloth ............................................................................................................................. 20
Fabric Attachment ..................................................................................................................... 20
Support Assembly Adjustment ....................................................................................................21
Bungee Clamp Attachment .........................................................................................................22
Troubleshooting and Tips ...........................................................................................................22
Appendix A ...............................................................................................................................23
Copyright January 1, 2016
Jim M. Bagley, GraceWood, Inc
(Reproduction Prohibited)
Version 2.1
X
?
2
Warranty
1-800-264-0644
Warranty Information for your Launch Pad Quilting Frame
The Launch Pad Quilting Frame has a One-Year limited warranty on all parts. The Grace Company will
repair or replace, at its discretion, any part with problems due to our manufacturing, or defects in
materials. This warranty does not cover parts damaged through misuse, improper storage, improper
assembly, loss, natural events, and willful destruction. Parts must be returned to the Grace Company,
shipping prepaid, before we can repair or replace them. We will promptly return the repaired/re-
placed part at our expense if done within a year of the purchase date.
3
See Appendix for Part and Assembly Number References.
Box 1 Components
1x 1x 1x
01-A100172 01-A100173 01-A100174
1x
3x
01-A100175
01-A100176
Box 1 Inner Box 1 Components
01-A10017801-A100177
01-A10018001-A100179
1x 1x
1x 1x
2x
04-11041
4x 1x 1x
04-11014 04-11015 04-11016
4
Box 1 Inner Box 2 Components
1x
2x
3x
01-A100181
01-A100182
01-A100183
6x
03-10257
Box 1 Inner Box 3 Hardware Box (Tools Provided)
03-10742 03-10741 03-10167 03-10166
1x 1x 1x 1x
03-10743
1x
5
Box 2 Components
6x
04-11005
2x
01-A100171
4x
4x
05-11027
04-11039
4x
08-10572
4x
05-11066
Box 1 Inner Box 3 Hardware Box Continued
03-10951
44x
03-10953
16x
8x
03-10973
8x
03-1116003-11159
8x
6
Leveling Foot Attachment to Frame Legs
1
03-10257
03-10257
03-10257
03-10257
03-10257
03-10257
01-A100172
01-A100173
01-A100174
2
3
Leg Height Adjustment Chart
The Height Adjustable Legs will come
pre-installed.
Setting the frame height so that the fabric surface
is at about elbow height is a good general starting
point.
Adjust the height from there based on what is
most comfortable for you.
Height of Fabric Surface
Top Hole 42” 3rd Hole 38”
6th Hole 41” 2nd Hole 37”
5th Hole 40” Bottom
Hole
36”
4th Hole 39”
1 inch
7
Leg Height Adjustment
4
01-A100172
03-10167
03-10743
03-10726
03-11158
03-10730
A
*INS-LP001
B
03-10167
03-10743
03-10726
03-11158
03-10730
01-A100172
Leg Height Adjustment Chart
Left
8
5
A
B
03-10167
03-10743
03-10726
03-11158
03-10730
03-10167
03-10743
03-10726
03-11158
03-10730
6
03-10167
03-10743
03-10726
03-11158
03-10730
03-10167
03-10743
03-10726
03-11158
03-10730
01-A100174
01-A100174
01-A100173 01-A100173
A
B
Right
Middle
9
7
Table Assembly
A
01-A100171
03-10951
12x
03-10951
03-10741
01-A100174
01-A100173
B
03-10951
03-10741
Note: Align the two front edges of the tables in the center so they are ush.
10
Table Braces
8
A
B
03-10951
03-10741
03-10951
03-10741
04-11014
04-11014
04-11014
04-11014
04-11016
04-11015
03-10951
26x
8x
11
9
Track Assembly
8x
03-10973
04-11039
04-11039
04-11041
A
B
C
D
03-10973
03-10973
04-11039
04-11041
03-10973
03-10973
*INS-LP002
04-11039
*INS-LP002
05-11027
03-10973
03-10166
2x
12
03-10953
16x
Track Assembly Attachment
03-10167
03-10953
10
Note: Align the track ush to the edge of the table.
13
Rail Holder Assembly Attachment
11
03-10951
4x 8x
03-11160
A
B
*INS-LP003
*INS-LP004
*INS-LP006
*INS-LP005
03-10951
03-10741
03-10741
03-11160
03-11159
8x
03-11159
14
Geared Rail Assembly
12
A
01-A100175
04-11005
04-11005
01-A100181
01-A100182
B
*INS-LP007
04-11005
03-11070
03-10167
C
D
03-10742
*INS-LP007
01-A100182
03-10742
*INS-LP007
01-A100181
2x
03-10167
Note: Leave the connector bolts attached
to the coupler and unscrew the connector
bolt inside the sleeve of the rail until tight.
15
Geared Rail Assembly with Handwheel
13
A
B
C
D
01-A100181
04-11005
04-11005
01-A100175
01-A100183
*INS-LP008
04-11005
03-11070
03-10167
03-10742
*INS-LP008
03-10742
*INS-LP008
01-A100181
01-A100183
03-10167
Note: Leave the connector bolts attached
to the coupler and unscrew the connector
bolt inside the sleeve of the rail until tight.
16
Rail Attachment
14
*INS-LP007
*INS-LP007
15
Bottom Carriage Adjustment
A
01-A100176
17
15
B
03-10124
03-10167
C
Continued.
03-10124
03-10167
Section 1-1: Adjust Bottom Carriage
wheels so that they are parallel on the
carriage.
18
Completed Frame Example View
Putting the Machine onto the Frame
17
18
*INS-LP008
19
Ratchet Use
Ratchet Disengaged
Ratchet Engaged
19
20
Leveling Foot Adjustment
03-10743
18"
24"
Take-up Leader
Backing Leader
Center Marks
18"
Top Leader
Leader Cloth Example
Fig. 1-2
Pins
Take Up Leader
Top Leader
Backing Leader
Quilt Top
Batting
Quilt Backing
Take Up Leader
Backing Leader
Top Leader
Batting
20
Leader Cloth
Section 2-1: High thread count fabric such as
Muslin is recommended for Leader Cloth material.
Section 2-2: Cut your Leader Cloth fabric to the
match that of the Leader Cloth Diagram and the
width 6 inches shorter than your rail length. Surge
or hem all edges.
Section 2-3: Pin the Leader Cloths to the appro-
priate sections of the quilt. (Fig. 1-2)
Fabric Attachment
22
Section 3-1: Tape the leaders to the rails and pin the fabric to the leaders. The
batting will drape down near the oor.
Note: There is a Batting rail option available for purchase.
A
21
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Grace Company The Q'nique Frame Operating instructions

Brand
Grace Company
Model
The Q'nique Frame
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents