The Load Resistor (ENC-LR120) Quick Reference Guide provides all the steps
necessary to install the ENC-LR120.
This load resistor is used with the 8 Channel Dimmer Module and Quad II Dimmer
Module in cases where the minimum load requirement is not met by the load
installed on any given channel. This accessory is placed in the module, from the
channel output to neutral.
Box Contents
(1) ENC-LR120
(1) Quick Reference Guide (this document)
Specifications
Environmental
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
10% to 90% Relative Humidity (non-condensing)
Maximum BTUs
10 BTU/hour
10 BTU/hour
Dimensions
Dimensions
Tolerances
Height
0.546 in | 1.387 cm
± 0.005 in | 0.015 cm
Width
1.938 in | 4.923 cm
± 0.024 in | 0.062 cm
Depth
1.080 in | 2.743 cm
± 0.005 in | 0.015 cm
Value
Value
Value
Resistor Value
1.5 K
1.5 K
Resistor Watts
25 watts
25 watts
Connecting the ENC-LR120
The next diagram shows how to connect a load resistor (ENC-LR120) for 120 volt
applications used within a Savant SmartLighting system.
Stripped end
to neutral bar
Resistor
Stripped end to load
terminal on module
Top View of ENC-LR120
The ENC-LR120 is a load resistor for 120 volt applications used within the Savant
lighting architecture. It is used for increasing load size when needed.
Savant Systems LLC
Price Schedule June 2013
USD
Description
Model
GROUND BAR
$50.00 ENC-GBAR-00
The ENC-GBAR is a Ground bar for the two and four module eclosures (ENC-2000 /
ENC-4000) used within the Savant Lighting Architecture. It is used to tie each
circuit's grounds together within the enclosure.
LIGHTING
Sugg. Retail (USD)
Description
Model
LOAD RESISTOR (120V)
$15.00 ENC-LR120-00
The ENC-LR120 is a Load resistor for 120 volt applications used within the Savant
Lighting Architecture. It is used for increasing load size when needed.
LIGHTING
Sugg. Retail (USD)
140
* All prices, availability, designs and specifications are subject to change without notice.
Additional Documentation
Additional Documentation for the Savant lighting products is available at: savantsystems.com
Knowledge Base > Savant Hardware > Lighting Control
Location of ENC-LR120 on a Savant Lighting Module
Load Resistor
(ENC-LR120)
Quick Reference Guide
009-1170-00
ENC-LR120-00
!!1 of 1
030414
ENC-LR120
Exploded view of ENC-LR120 on Savant lighting module
Please note the location of the load
resistor in the enclosure must be
selected carefully. Avoid shorting
out on other wires in the enclosure.
Also, securing the load resistor to
the enclosure will improve its heat
sinking abilities.
Copyright © 2014 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
Tie one end (white) of the ENC-LR120
wire to the neutral bar (any position).
Tie one end (black) of the
ENC-LR120 wire to the
load terminal (to whichever
channel is required).
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Savant LMR-8120-00 Reference guide
-
-
-
-
-
-
-
Savant SCA-CONFL-00 Reference guide
-
Savant SSC-0014-00 Deployment Guide
-
Other documents
-
Foster HR 360 LR 360 User manual
-
Foster HR150 (13-101) (CW730) Owner's manual
-
-
Sprint Electric PLX User manual
-
Sprint Electric PL/X User manual
-
Power Sonic Lawn Mower Battery User guide
-
Eurotherm ERPL/ERPLX Digital DC Drive Product Owner's manual
-
Husqvarna LR120 User manual
-
Key Digital KD-IP822DEC User guide
-
Sprint Electric SLE Product User manual
