4 5
Pairing a wireless device
1. Start by holding Power (9) down for 7 seconds. You will see the LED indicator (4) ash blue 4 times and then
enter pairing mode
2. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices (check your device’s
manual if you’re unsure how to do this)
3. Select ‘Arena’ from the list of found devices
4. If asked for a passcode, enter ‘0000’ or ‘1234’ and the headphones will then be connected to your device
5. After pairing successfully, the LED indicator (4) will ash blue; you can then answer the phone or listen to
your music
6. The next time the headphones are switched on, they will automatically search for and attempt to connect
to the last paired device
Note: ‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way aliated with or endorsed by
Bluetooth SIG Inc.
Re-pairing or pairing new devices
1. Make sure the wireless is turned o on any previously paired devices
2. Follow the ‘Pairing a wireless device’ instructions from step 1
Battery information
• Your device is powered by a rechargeable battery. Unplug the charger from the electrical plug and the device
when not in use
• If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice a month
to ensure battery integrity
• Please do not leave the device in hot or cold places, such as in a closed car in summer or winter conditions as
it will reduce the capacity and lifetime of the battery
• Do not dispose of batteries in a re as they may explode. Batteries may also explode if damaged
[...continued] Instructions for use