USER MANUAL
JB. 5901–b / Made in China © KitSound is a trademark of
Kondor Limited, 2018. Christchurch, Dorset, BH23 4FL, UK
Products showing the ‘Crossed Through’ wheelie bin symbol must be
recycled separately from household waste at the end of their useful life.
Please DO NOT dispose of this appliance in normal household waste.
Your local appliance retailer may operate a ‘take-back’ scheme when
you are ready to purchase a replacement product, alternatively contact
your local government authority for further help and advice on where
to take your appliance for recycling.
Please recycle this packaging responsibly. All trademarks are
acknowledged as the property of their respective owners. Unless
otherwise stated their use does not imply that the trademark owner
is aliated with KitSound or endorses the products herein.
EXERT SPORTS
kitsound.co.uk
BLUETOOTH
®
HEADPHONES
2
3
Please read this manual carefully before use.
Box contents
• KS Exert Sports Bluetooth Headphones
• Pouch with adjustable waistband
• Micro USB charge cable
• 3.5 mm aux cable
• User manual
Functions
1. Volume+/Next track
2. Multi–function button (MFB)
3. Volume–/Previous track
4. 3.5 mm aux port
5. Micro USB charging port
6. LED indicator
7. Microphone
1
5
3
2
4
6
7
KS Exert is rated IPX4 splash resistant
This means that the KS Exert is splash resistant, but is not
impervious to larger amounts of water. If the KS Exert has
become damp/wet during use, we recommend drying it
o to help prevent any damage from occurring.
4
5
Instructions for use
Charging the battery
1. Connect the Micro USB charging cable to the Micro
USB charging port (5) and plug into a power source
2. The LED indicator (6) will be red whilst charging,
and nish after around 2–3 hours. Once fully charged,
the LED indicator (6) will turn o
3. If the LED indicator (6) ashes red quickly every
30 seconds and a warning beep is heard, the battery is low
Note: The rst charge may take up to 4 hours to complete.
Pairing a Bluetooth device
1. Hold the MFB (2) down for 3 seconds. You will see the
LED indicator (6) ash blue and red quickly and then
enter pairing mode
2. Turn on your iOS, Android, or Windows device’s
Bluetooth ON and search for new devices
3. Select ‘KS Exert’ from the list of found devices. If asked for
a passcode, enter ‘0000’ and the headphones will then be
connected to your device
4. After pairing successfully, the LED indicator (6) will be solid
blue; you can then answer the phone or listen to your music
6. The next time you switch the headphones on, they will
automatically search for and attempt to connect to the
last paired device
[continued...]
6
7
[...continued] Re–pairing or pairing new devices
1. Make sure you have turned o the Bluetooth on any
previously paired devices
2. Follow the ‘Pairing a Bluetooth device’ instructions
from step 1
Call handling
Answer a call Press MFB (2) to answer call
End call Press MFB (2) to end call
Playing music
Play/Pause Press (don’t hold) MFB (2) to start and
pause audio
Adjusting the
volume
Press and hold Volume+ (1) or Volume– (3)
to adjust volume. The volume can also be
adjusted on your device
Music selection Press (don’t hold) Next track (1) or
Previous track (3)
Wired use
1. Turn o the headphones
2. Plug the 3.5 mm aux cable into the 3.5 mm aux port (4)
and into your device
Note: Inserting an audio cable disables wireless functionality.
8
9
Removable earcups
Please do not wash the earcups in a washing machine.
The removable earcups are hand wash only.
Washing the earcups:
1. Gently remove the earcup by pulling it away from the headband
at the groove where the material meets the plastic
2. Once removed – take out the plastic backing from inside
the earcup
1
2
[continued...]
10
11
[...continued] Removable earcups
3. You can then hand wash the earcups with soap.
Please do not use bleach
4. Leave the earcups to dry naturally, do not tumble dry. When
the earcups have dried, re–insert the plastic backing making
sure it is the right way up according to the arrow,
and it is the correct side (left/right)
5. Now, simply clip the earcup back onto the headband, making
sure you are connecting it to the correct side (left/right). Make
sure that all 4 clips have snapped together, there should be
no gaps around the edge
3
4
5
12
13
Care for your Pouch with Adjustable Waistband
Please DON’T:
• Clean the Pouch with Adjustable Waistband with bleach
or detergents
• Dry clean your Pouch with Adjustable Waistband
• Put your Pouch with Adjustable Waistband into a
washing machine
Please DO:
• Hand wash your Pouch with Adjustable Waistband at
a low temperature
Care for your KS Exert Sports
Bluetooth Headphones
Please DON’T:
• Drop the Exert as this will invalidate your warranty
• Open up the Exert past the removable earcups.
There are no user serviceable parts inside
• Expose the Exert to extreme temperatures or
rapid changes of hot to cold or vice versa
Please DO:
• Clean the Exert with a soft dry cloth and no detergents
14
15
Specications
Works with Bluetooth
V4.1
Bluetooth range up to 10 m
Frequency response 20 Hz – 20 kHz
Sensitivity 103 dB ± 3 dB
Play time up to 12 hours
Standby time up to 60 days
Battery type 3.7 V, LiPo 300 mAh, rechargeable
IPX Rating IPX4
Battery information
• A rechargeable battery powers your device. Unplug the
charger from the electrical plug and the device when not
in use
• If left unused, a fully charged battery will lose its charge
over time. We recommend a full charge twice a month to
ensure battery integrity
• Please do not leave the device in hot or cold places, such
as in a closed car in summer or winter conditions, as it
will reduce the capacity and lifetime of the battery
• Do not dispose of batteries in a re as they may explode.
Batteries may also explode if damaged
16
17
Troubleshooting
• If you cannot connect the headphones to your device,
please try the following:
– Ensure that the headphones are charged, switched on,
paired with and connected to your device
– Check the headphones are within 10 metres (30 feet) of
your device and that there are no obstructions (such as
walls or other electronic devices) between the
headphones and the device
– The headphones can only pair to one device at a time, so
please ensure there are no conicting wireless devices
trying to connect to the headphones
• If the headphones will not switch o, you can reset them
back to normal by putting them on charge
• If you receive an intermittent signal, please ensure the
headphones are fully charged before continuing use
18
19
Please do not attempt to open this product. There are no user serviceable
parts inside. If your product has an embedded, non–replaceable battery, do
not attempt to access or remove the battery. This may cause personal injury
and will damage the product.
Making any attempt to open the product or carry out repair voids any
and all warranties.
We apologise for any inconvenience caused by minor inconsistencies in
these instructions, which may occur as a result of product improvement
and development.
We hope you’ve now got all the information you need to get
started, but if you’re having problems with anything, please
feel free to contact us at: support@kitsound.co.uk
Hereby, Kondor Ltd declares that the radio equipment type,
KSEXERBK Exert Sports Bluetooth Headphones, is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://kondor.co.uk/product–documents
The Bluetooth
®
word mark and logos are registered trademarks owned
by the BluetoothSIG, Inc. and any use of such marks by Kondor Ltd.
is under license. Other trademarks and trade names are those
of their respective owners.
Warning: To prevent possible hearing damage, do not listen at
high volume levels for long periods. For your own safety, please
be aware of your surroundings when using these headphones.
/
