Version 1.0
Coda
Insert 2 Drawer
fantasticfurniture.com.au
fantasticfurniture.com.au Page 2
Recommended weight capacity : 5kgs.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver
DO NOT USE
Page 4
fantasticfurniture.com.au
Left
Side Panel
(P1)
Right
Side Panel
(P2)
Back Panel
(P4)
Rail
(P3)
Left
Drawer Side
(P6)
Right
Drawer Side
(P7)
Drawer Back
(P9)
Drawer
Base
(P8)
Drawer Front
(P5)
x 2
Drawer
Support
(P10)
Parts list
Left Side Panel (P1);
Right Side Panel (P2);
Rail (P3);
Back Panel (P4);
2 x Drawer Fronts (P5);
2 x Left Drawer Sides (P6);
2 x Right Drawer Sides (P7);
2 x Drawer Bases (P8);
2 x Drawer Backs (P9);
2 x Drawer Supports (P10)
6 x Dowels
(H1)
20 x Long
Screws (L30mm)
(H2)
16 x Small
Screws
(H5)
10 x Small
Cam Nuts
(H4)
10 x Small
Cam Bolts
(H3)
2 x CL Runner
Tracks
(H6)
2 x CR Runner
Tracks
(H7)
2 x DR Runners
(H9)
2 x DL Runners
(H8)
4 x Covers
(H11)
2 x Medium
Screws (L20mm)
(H10)
You will need
Step 1
You will need
Step 2
Page 5
fantasticfurniture.com.au
(P2)
(P1)
H6
H6
H5
H5
H5
H5
H7
H7
H5
H5
H5
H5
H7
CR
H5
2 x CL Runner
Tracks (H6)
8 x Small
Screws (H5)
Phillips Head
Screwdriver
2 x CR Runner
Tracks (H7)
H6
CL
H5
Attach 2 x CL Runner Tracks (H6) to Left Side Panel (P1) with 4 x Small Screws (H5).
Attach 2 x CR Runner Tracks (H7) to Right Side Panel (P2) with 4 x Small Screws (H5).
(P1)
(P3)
(P4)
H1
H2
H2
H2
H2
2 x Dowels
(H1)
Phillips Head
Screwdriver
4 x Long
Screws (H2)
Insert 2 x Dowels (H1) into the holes of Left Side Panel (P1) as shown.
Attach Back Panel (P4) and Rail (P3) to Left Side Panel (P1)
with 4 x Long Screws (H2) using a Phillips Head Screwdriver.
Step 4
You will need
You will need
Step 3
Page 6
fantasticfurniture.com.au
(P3)
(P2)
(P4)
H2
H2
H2
H1
H1
2 x Dowels
(H1)
Phillips Head
Screwdriver
4 x Long
Screws (H2)
Insert 2 x Dowels (H1) into the holes of Back Panel (P4) as shown.
Attach Right Side Panel (P2) to Back Panel (P4) and Rail (P3) with 4 x Long Screws (H2).
Tighten the screws with a Phillips Head Screwdriver.
(P5)
H3
H3
H3
H3
H3
Phillips Head
Screwdriver
5 x Small Cam
Bolts (H3)
Screw 5 x Small Cam Bolts (H3) into Drawer Front (P5) with a Phillips Head Screwdriver.
You will need
Step 5
Step 6
Page 7
fantasticfurniture.com.au
You will need
Step 7
H1
(P5)
(P6)
(P7)
H4
H4
H4
H4
H4
(P10)
Insert 1 x Dowel (H1) into Drawer Front (P5) as shown.
Insert 5 x Small Cam Nuts (H4) into the holes of Drawer Sides (P6, P7) and Drawer Support (P10).
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Align the holes together, secure Drawer Sides (P6, P7) and Drawer Support (P10) into place,
tighten the Cam Nuts using a Phillips Head Screwdriver.
1 x Dowel
(H1)
5 x Small Cam
Nuts (H4)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P6)
(P7)
(P8)
Slide Drawer Base (P8) in through the grooves
on Drawer Sides (P6, P7).
(P6)
(P7)
(P9)
H2
H2
H2
H2
H2 H2
Attach Drawer Back (P9) to Drawer Sides (P6, P7)
and Drawer Support (P10) with 6 x Long Screws (H2),
make sure that the groove lines up the whole way around the drawer.
Tighten the screws using a Phillips Head Screwdriver.
Phillips Head
Screwdriver
6 x Long
Screws (H2)
Phillips Head
Screwdriver
Step 9
You will need
Step 8
Page 8
fantasticfurniture.com.au
(P6)
(P7)
H5
H9
H8
H5
H5
H5
H9
H5
DR
H5
H8
DL
H5 H5
4 x Small
Screws (H5)
1 x DL Runner
(H8)
1 x DR Runner
(H9)
Phillips Head
Screwdriver
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P6) and
1 x DR Runner (H9) to the bottom of Right Drawer Side (P7) with 4 x Small Screws (H5).
Tighten Screws using a Phillips Head Screwdriver.
Repeat Step 4 to Step 8 to assemble another drawer
.
Put the insert cabinet into the bookcase,
make sure the drawer front of insert cabinet is flush with the edge of shelf.
Step 10
Page 9
fantasticfurniture.com.au
H10
H10
H11
H11
You will need
Phillips Head
Screwdriver
2 x Covers
(H11)
2 x Medium
Screws (H10)
Take down the drawers from the insert cabinet carefully.
Attach the cabinet to the bookcase with 2 x Medium Screws (H10) using a Phillips Head
Screwdriver.
If you'd like to adjust the insert cabinet or remove it,
please seal the holes with the Covers (H11).
Page 10
fantasticfurniture.com.au
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Put the drawers into the cabinet as shown.
/
