fantastic furniture BDIDRE6DWOOOMDFOAK Assembly Instructions

Brand: fantastic furniture

Model: BDIDRE6DWOOOMDFOAK

Type: Assembly Instructions

Bridge

Dresser 6 Drawer Oak

Version 2.0

Approved SM 10.01.2023

Recommended Weight Capacity: 80kg/Top Panel, 10kg/Drawer

Hardware Pack

Parts list

Top Panel (P1)

Bottom Panel (P2)

Right Panel (P3)

Left Panel (P4)

Middle Panel (P5)

6 x Support Panels (P6)

4 x Back Panels (P7)

2 x Back Support Panels (P8)

6 x Drawer Doors (P9)

6 x Drawer Backs (P10)

6 x Drawer Left Panels (P11)

6 x Drawer Right Panels (P12)

6 x Drawer Bottoms (P13)

6 x Drawer Supports(P14)

2 x Legs (P15)

Support Leg (P16)

Top Panel

(P1)

Bottom Panel

(P2)

Right Panel

(P3)

Left Panel

(P4)

Middle Panel

(P5)

6 x Supports Panel

(P6)

Back Panel

(P7)

Back Support Panel

(P8)

Legs

(P15)

Support Leg

(P16)

6 x Left Runner

Tracks

(H15-1)

62 x Cam Bolts

(H1)

62 x Cam Nuts

(H2)

18 x Dowels

(H3)

12 x Washers

(H5)

12 x Bolts

(H6)

1 x Allen Key

(H7)

4 x Levelling Feet

(H8)

12 x Wedges

(H9)

84 x Short Screws

(H10)

4 x Washers

(H11)

2 x Wall Straps

(H12)

2 x Medium Screws

(H13)

6 x Right Runner

Tracks

(H15-2)

6 x

Runners

(H15-3)

Left 6 x

Runners

(H15-4)

Right

3 x Long Dowels

(H4)

36 x Long Screws

(H14)

2 x Short Bolts

(H16)

Back Panel

(P7)

Drawer Bottoms

(P13)

Drawer Supports

(P14)

6 x Bolts

(H17)

1 x Allen Key

(H18)

2 x Short Bolts

(H16)

1 x Allen Key

(H7)

2 x Legs

(P15)

12 x Washers

(H5)

12 x Bolts

(H6)

1 x Allen Key

(H7)

4 x Levelling Feet

(H8)

1 x Support Leg

(P16)

P16

H16

Using 2 x short bolts (H16) secure the Suppot Leg(P16)to the bottom panel (P2), tightening

completely with allen key (H7).

Using 12 x bolts (H6) and 12 x washers (H5), secure the 2 x legs (P15) to the bottom

panel (P2), tightening completely with allen key (H7). Screw in 4 x levelling feet

(H8) into the bottom of the 2 x legs (P15) as shown. Ensure they are secure.

P15

6 x Dowels

(H3)

(P2)

With assistance, carefully turn the bottom panel upright.

Insert 6 x dowels (H3) into the bottom panel (P2).

36 x Short Screws

(H10)

6 x Left Runner

Track

(H15-1)

6 x Right Runner

Track

(H15-2)

(H15-1)

(H15-2)

(H15-1)

(H10)

(H15-2)

Secure 3 x right runner tracks (H15-2) to the right panel (P3) using 9 x short screws (H10),

tightening with the phillips head screwdriver.

Repeat this step for the other 3 x right runner tracks (H15-2) and 6 x left runner

tracks (H15-1) to middle panel (P5) and left panel (P4).

(H10)

(P3)

10 x Cam Bolts

(H1)

6 x Dowels

(H3)

Phillips Head

Screwdriver

Insert 3 x dowels (H3) into right panel (P3) and secure 5 x cam bolts (H1) to

right panel (P3), tightening with a phillips head screwdriver.

Repeat this step for the left panel (P4).

(H3)

(H1)

(H3)

(H1)

(H3) (P4)

(H1)

(H3)

(H1)

(H3)

(H1) (H1)

3 x L ong Dowels

(H4)

(P5)

10 x Cam Bolts

(H1)

(H4)

(H1)

Insert 3 x long dowels (H4) and secure 5 x cam bolts (H1) to middle panel (P5),

tightening with the a phillips head screwdriver.

the other side of the middle panel (P5). secure 5 x cam bolts (H1) to

Phillips Head

Screwdriver

10 x Cam Nuts

(H2)

Phillips Head

Screwdriver P6

P8 P4

Align and attach 3 x support panels (P6) and 1 x back support panel (P8) to the Left

panel (P4).

With assistance, align and attach the middle panel (P5) to the 3 x support

panels (P6) and 1 x back support panel (P8) as shown. Insert 10 x cam nuts

(H2) into the 4 x support panels (P6, P8), rotating the cam nuts so the

arrow points towards the incoming cam bolt. Secure the panels together by

tightening the cam nuts (H2) using a phillips head screwdriver.

Note: attach the back support panel (P8) on the side closest to the grooves.

10 x Cam Nuts

(H2)

Phillips Head

Screwdriver

Align and attach 3 x support panels (P6) and 1 x back support panel (P8)

to the middle panel (P5).

With assistance, align and attach the right panel (P3) to the 3 x support

panels (P6) and 1 x back support panel (P8) as shown. Insert 10 x cam nuts

(H2) into the 4 x support panels (P6, P8), rotating the cam nuts so the arrow

points towards the incoming cam bolt. Secure the panels together by

tightening the cam nuts (H2) using a phillips head screwdriver.

With assistance, carefully turn the assembled frame upright.

Slide 2 x back panels(P7) into the grooves of the left, right and

middle panel (P3, P4, P5).

With assistance, align the bottom panel (P2) onto the assembled frame as shown.

Ensure the grooves on all panels align. attach with 6 x Bolts (H17) by tightening with

Allen Key (H18).

6 x Bolts

(H17)

1 x Allen Key

(H18)

With assistance, carefully turn the assembled frame upright.

Slide 2 x back panels(P7) into the groove of right panel, left panel and

middle panel (P3, P4, P5) as shown.

6 x Cam Bolts

(H1)

6 x Dowels

(H3)

Phillips Head

Screwdriver

(P1)

Insert 6 x dowels (H3) into the top panel (P1). Secure 6 x cam bolts (H1) to the

top panel (P1), tightening using a phillips head screwdriver.

(H2)

With assistance, carefully align and lower the top panel (P1) onto the assembled

unit as shown. Insert 6 x cam nuts (H2) into the right，

left and middle panels (P3, P4 P5), rotating the cam nuts so the arrows point towards the

incoming cam bolts.

Secure the panels together by tightening the cam bolts (H2) on the right，

left and middle panels (P3, P4 P5) using a phillips head screwdriver.

36 x Cam Bolts

(H1) Phillips Head

Screwdriver

(P9)

(H1)

Secure 6 x cam bolts (H1) to 1 x drawer door (P9), tightening using a phillips head

screwdriver.

Repeat this step for the other 5 x drawer doors (P9).

(P11)

(P12)

(P13)

(P9)

Align and attach 1 x drawer left panel (P11) and 1 x drawer right panel (P12)

and 1xDrawer Support(P14) to 1 x drawer door (P9). Ensure the grooves on the

drawer panels (P11, P12) align as shown.

Insert 4 x cam nuts (H2) into the panels (P11, P12), rotating the cam nuts so the

arrow points towards incoming cam bolts. Secure the panels by tightening the cam

nuts (H2) using a phillips head screwdriver.

Slide 1 x drawer bottom (P13) into the grooves on the panels (P11, P12) as shown.

Repeat this step for the other 5 x drawers.

(P14)

(P10)

(H14)

36 x Long Screws

(H14)

Align 1 x drawer back (P10) to the assembled drawer. Ensure the pre-drilled holes on

the left and right drawer panels and Drawer support(P11, P12,P13) align with the

pre-drilled holes on the drawer back (P13). Secure together using

6 x long screws (H14), completely tightening with a phillips head screwdriver.

Repeat this step for the other 5 x drawers.

Slide the 6 x assembled drawers into dresser.

36 x Short Screws

(H10)

Phillips Head

Screwdriver

3 x Left

Runner

(H15-3)

3 x Right

Runner

(H15-4)

(H10)

(H15-4)

(H15-3)

(H10)

Note: Ensure the wheels on the runners are

at the back of the drawer as shown.

Secure 1 x left runner (H15-3) and 1 x right runner (H15-4) to the assembled drawer

using 6 x short screws (H10), tightening with the phillips head screwdriver.

Insert 2 x Cam Nuts(H2) into Drawer Support(P14) as shown.Rotate the

cam nuts so the arrows point towards the incoming cam bolts by tightening

the Cam Nuts(H2) with the Phillips Head Screwdriver

Repeat this step for the other 5 x drawers.

12 x Cam Nuts

(H2)

(P14)

2 x Middle Screws

(H13)

(H11)

H10

H 9

12 x Short Screw

(H10)

(H9)

Insert 12 x wedges (H9) into the back of the dresser as shown. Secure using

12 x short screws (H10), tightening with the phillips head screwdriver.

Attach 2 x wall straps (H12) to the top panel (P1) using 2 x washers (H11) and

2 x medium screws (H13). Tighten using the phillips head screwdriver.

We strongly recommend this product is permanently fixed to the wall

or other suitable surface.

2 x Wall Straps

(H12)

Page 16

2 x Washers

(H11)

With assistance, carefully move the dresser to its final position.

Attach the wall straps (H12) to the wall, ensuring it is firmly attached and secure.

If required, the levelling feet on the 2 x legs (P15) can be adjusted so the unit is level.

fantastic furniture BDIDRE6DWOOOMDFOAK Assembly Instructions

fantastic furniture BDIDRE6DWOOOMDFOAK Assembly Instructions

fantastic furniture BDIDRE6DWOOOMDFOAK Assembly Instructions

Related papers

Other documents