fantastic furniture JAVBCK2DROOOPABOAK Assembly Instructions
- Type
- Assembly Instructions
Version 1.0
Java
Bookcase 4 Shelf 2 Door
fantasticfurniture.com.au
Required
Two People
Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY
OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
RECOMMENDED WEIGHT CAPACITY: 20kgs/shelf
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
fantasticfurniture.com.au
Page 3
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Looks like you’ve found
your Fantastic!
Love it? Share it!
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au
Page 4
Parts list
Carton 1:
1 x Top Panel (P1)
1 x Bottom Panel (P2)
2 x Side Panels (P3)
1 x Divider Panel (P4)
2 x Doors (P5)
2 x Back Panels (P10)
4 x Legs (P11)
Carton 2:
1 x Left Fixed Shelf (P6)
1 x Right Fixed Shelf (P7)
2 x Shelf A (P8)
2 x Shelf B (P9)
Top Panel (P1)
What you need
to assemble the product
Other tools you need
Phillips Head Screwdriver
fantasticfurniture.com.au
Page 5
Divider
Panel
(P4)
Left Fixed
Shelf (P6)
Back Panel
(P10)
Side
Panel
(P3)
Bottom Panel
(P2)
Side
Panel
(P3)
Door (P5)
Door (P5)
Right Fixed
Shelf (P7)
Shelf A
(P8)
Shelf B
(P9)
Leg
(P11)
Back Panel
(P10)
Leg (P11)
Leg
(P11)
Leg
(P11) Leg
(P11)
Shelf A
(P8)
Shelf B
(P9)
fantasticfurniture.com.au
Page 6
Hardware Pack
20 x Cam Bolts
(H1)
20 x Cam
Nuts (H2)
20 x Dowels
(H3)
2 x Handles
(H4)
8 x Back Panel
Screws (H6)
12 x Flat Washers
(H9)
8 x Spring
Washers (H10)
4 x Handle
Screws (H11)
1 x Allen Key
(H12)
4 x Felt Pads
(H5)
8 x Bolts
(H8)
4 x Back Panel
Connectors (H7)
2 x Wall Strap
Screws (H14)
8 x Hinges
Screws (H15)
2 x Wall Straps
(H13)
8 x Door
Screws (H16)
4 x Hinges
(H17)
4 x Stoppers
(H19)
16 x Shelf Pins
(H18)
8 x Stopper
Screws (H20)
12 x Stickers
(H21)
Step 1
Page 7
fantasticfurniture.com.au
You will need
Attach 4 x Felt Pads (H5) to the bottom of Legs (P11x4)
by removing the adhesive backing and pressing firmly.
Step 2
You will need
8 x Bolts
(H8)
Attach Legs (P11x4) to Bottom Panel (P2) with 8 x Bolts (H8), 8 x Spring Washers (H10)
and 8 x Flat Washers (H9) as shown by tightening with the Allen Key (H12).
(P11)
4 x Felt Pads
(H5)
X4
(H5)
8 x Flat
Washers (H9)
8 x Spring
Washers (H10)
1 x Allen Key
(H12)
(P11)
(H12)
(H8)
(H9)
(H10)
(P2)
(P2)
(P11)
Required
Two People
(P11)
(P11)
(P11)
Step 3
Page 8
fantasticfurniture.com.au
You will need
Step 4
You will need
(P2)
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
2 x Stopper
Screws (H20)
1 x Stopper
(H19)
(H1)
(H20)
(H19)
Attach 6 x Cam Bolts (H1) to
Bottom Panel (P2) by tightening with the Phillips Head Screwdriver.
Secure 1 x Stopper (H19) to Bottom Panel (P2) as shown with 2 x Stopper Screws (H20)
by tightening with the Phillips Head Screwdriver.
(H20)
(H19)
(P2)
Attach 6 x Cam Bolts (H1) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Secure 1 x Stopper (H19) to Top Panel (P1) as shown with 2 x Stopper Screws (H20)
by tightening with the Phillips Head Screwdriver.
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
2 x Stopper
Screws (H20)
1 x Stopper
(H19)
(P1)
(H20)
(H19)
(H20)
(H19)
(P2)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
Step 5
Page 9
fantasticfurniture.com.au
You will need
8 x Dowels
(H3)
Step 6
You will need
Insert 8 x Dowels (H3) into Left & Right Fixed Shelves (P6&P7) as shown.
Secure 2 x Stoppers (H19) to Left & Right Fixed Shelves (P6&P7) as shown
with 4 x Stopper Screws (H20) by tightening with the Phillips Head Screwdriver .
(H3)
(H1)
(P3)
(P7)
(P6)
(H20)
(H20)
(H19)
(H19)
X2
(H20)
(H19)
(P6)
Phillips Head
Screwdriver
4 x Stopper
Screws (H20)
2 x Stopper
(H19)
8 x Dowels
(H3)
4 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Insert 4 x Dowels (H3) into Side Panel (P3) as shown.
Secure 2 x Cam Bolts (H1) to Side Panel (P3)
by tightening with the Phillips Head Screwdriver.
Repeat steps for the second Side Panel (P3).
(H1)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
Step 7
Page 10
fantasticfurniture.com.au
You will need
Insert 4 x Cam Nuts (H2) into
Left & Right Fixed Shelves (P6&P7) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left & Right Fixed Shelves (P6xP7) to Side Panels (P3x2)
by tightening the cam nuts with the Phillips Head Screwdriver.
Step 8
You will need
Insert 4 x Dowels (H3) into Divider Panel (P4).
Attach 2 x Cam Bolts (H1) to Divider Panel (P4)
as shown by tightening with the Phillips Head Screwdriver.
Carefully turn the Divider Panel (P4) over and attach
the remaining 2 x Cam Bolts (H1) by tightening with the Phillips Head Screwdriver.
4 x Cam
Nuts (H2)
(H2)
(P6)
(P7)
4 x Dowels
(H3)
4 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P4)
(P4)
(H3)
(H1)
Phillips Head
Screwdriver
Ensure the raw edge of the shelves
are at the back of the bookcase
before securing
(H1)
(H1)
(H1)
(H3)
(H3)
(H3)
(H2)
(H2)
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
(P3)
Laminated
edge
Step 9
Page 11
fantasticfurniture.com.au
You will need
Insert 4 x Cam Nuts (H2)
into Left & Right Fixed Shelves (P6&P7)
as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Left & Right Fixed Shelves (P6&P7) to Divider Panels (P4)
by tightening the cam nuts with the Phillips Head Screwdriver.
Step 10
You will need
4 x Cam
Nuts (H2)
6 x Cam
Nuts (H2)
(P4)
(P3)
(P3)
(P2)
(P6)
(P4)
(P7)
(H2)
Ensure the raw edge of the shelves are
at the back of the bookcase before securing
Insert 6 x Cam Nuts (H2) into Side
Panels (P3x2) and Divider Panel (P4) as shown.
Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Side Panels (P3x2) and Divider Panel (P4)
to Bottom Panel (P2) as shown by tightening
the cam nuts with the Phillips Head Screwdriver.
Required
Two People
Required
Two People
Raw
edge
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
Step 11
Page 12
fantasticfurniture.com.au
Slide Back Panels (P10x2) into
the grooves of Side Panels (P3x2),
Divider Panel (P4) and Bottom Panel (P2) as shown.
Step 12
You will need
6 x Cam
Nuts (H2)
(P4)
(P3)
(H2)
Insert 6 x Cam Nuts (H2)
into Side Panels (P3x2) and Divider Panel (P4)
as shown.
Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Top Panel (P1) to Side Panels (P3x2)
and Divider Panel (P4) by tightening
the cam nuts with the Phillips Head Screwdriver.
Peel o the adhesive backing of 12 x Stickers (H21)
and paste them over the Cam Nuts (H2) on the Side Panels (P3x2) and Divider Panel (P4).
Required
Two People
(P10)
(P10)
(P3)
(P3)
(P4)
(P1)
(P2)
Phillips Head
Screwdriver
12 x Stickers
(H21)
(H2)
(H2)
(H2)
(H2)
(H2) (H21)
(H21)
(H21)
(H21)
(H21)
(H21)
(H21)
(H21) (H21)
(P3)
Step 13
Page 13
fantasticfurniture.com.au
You will need
Step 14
You will need
Insert 4 x Back Panel Connectors (H7) into the corners of the assembled bookcase
as shown and secure with 4 x Back Panel Screws (H6)
by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Back Panel
Screws (H6)
4 x Back Panel
Connectors (H7)
Required
Two People
Secure Back Panels (P10x2) in place
with 4 x Back Panel Screws (H6)
as shown by tightening with the Phillips Head Screwdriver.
(H7)
(H6)
Phillips Head
Screwdriver
4 x Back Panel
Screws (H6)
(P10)
(P10)
(P1)
(P3)
(P2) (H7)
(H7)
(H7)
(P10)
(P10)
Ensure the corners of the bookcase
are square before securing
(H6)
(H6)
(H6)
(H6)
(H7)
(H6)
(H7)
Step 15
Page 14
fantasticfurniture.com.au
You will need
Step 16
You will need
Insert 16 x Shelf Pins (H18) into
Side Panels (P3x2) and Divider Panel (P4)
at your desired height.
Place Shelf A & B (P8x2 & P9x2)
into bookcase as shown by resting on the shelf pins.
Ensure the shelves are firmly secured in place before using.
(P9)
(P9)
(P8)
(P8)
(P3)
(P3)
(P4)
16 x Shelf Pins
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
(H18)
Phillips Head
Screwdriver
8 x Hing
Screws (H15)
4 x Hinges
(H17)
4 x Handle
Screws (H11)
2 x Handles
(H4)
X2
(P5)
(H11)
Attach 2 x Hinges (H17) to Door (P5) with 4 x Hinge Screws (H15) by tightening
with the Phillips Head Screwdriver. Secure Handle (H4) to Door (P5) as shown
with 2 x Handle Screws (H11) by tightening with the Phillips Head Screwdriver.
Repeat steps for the second Door (P5).
(H15)
(H17)
(P5)
(H4)
(H17)
(H17)
(H15)
(H15)
(H15)
Step 17
Page 15
fantasticfurniture.com.au
You will need
Step 18
You will need
Attach 2 x Hinges (H17) on Doors (P5x2) to Side Panels (P3x2)
as shown with 8 x Door Screws (H16) by tightening with the Phillips Head Screwdriver.
(H16)
(P5)
(H17)
Phillips Head
Screwdriver
8 x Door
Screws (H16)
(H16)
(P3)
(P3)
(P5)
(P5)
Attach Wall Straps (H13) to back of Top Panel (P1) with 2 x Flat Washers (H9)
and 2 x Wall Strap Screws (H14) by tightening with the Phillips Head Screwdriver.
2 x Flat
Washers (H9)
2 x Wall Strap
Screws (H14)
Phillips Head
Screwdriver
2 x Wall Straps
(H13)
(P1)
(H13)
(H9)
(H14)
We strongly recommend that
this product is permanently fixed to
the wall or other suitable surface.
(P1)
Step 19
Page 16
fantasticfurniture.com.au
You will need
2 x Flat
Washers (H9)
Phillips Head
Screwdriver
Seek advice from a qualified
trades person on how to
attach this wall strap to
your specific wall.
Screw and wall plug are not included.
Please use appropriate fixtures for your wall.
With assistance, move the bookcase to the final position.
Attach the wall straps to the wall with the appropriate fixtures.
Make sure they are firmly attached and secure.
Wall
(H13)
(H9)
Required
Two People
Page 17
fantasticfurniture.com.au
TO ADJUST YOUR DOORS TO MAKE THE GAPS MORE EVEN (OPTIONAL).
STEP 1
Open the door.
gap too large gap too small
STEP 2a MOVE DOOR OUT STEP 2b MOVE DOOR IN
STEP 3a MOVE DOOR LEFT STEP 3b MOVE DOOR RIGHT
STEP 2
STEP 3
Top panel
Side
panel
Door
Slightly pull the hinge forward. Slightly push the hinge back.
Slightly turn the screw clockwise
to make the gap smaller.
Slightly turn the screw
counterclockwise to make the gap
larger.
Adjust the door panel to be flush
with side panel and top panel edge.
Slightly loosen the screw indicated
and adjust the hinge to the desired
position (see step 2a & 2b), then
tighten the screw with a phillips
head screwdriver.
Adjust the gap between door panel
and side panel.
Slightly loosen or tighten
the screw indicated and adjust
the hinge to the desired position
(see step 3a & 3b).
Door
Side
panel
Top panel
Top panel
DoorDoor
Door
Door
Top panel Top panel
Side
panel
Side
panel
Door
Top panel
Side
panel Top panel
Door
Top panel
Door
Top panel
Door
Top panel
Door
Side
panel
Side
panel
Page 18
fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
fantastic furniture JAVBCK2DROOOPABOAK Assembly Instructions
- Type
- Assembly Instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
fantastic furniture CODDRW2DWOOOPABOAK Assembly Instructions
-
-
-
-
-
-
-