Executive
Version 1.1
0
Fantastic
Furniture
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Parts list
Backrest (P1);
Left Arm (P2);
Right Arm (P3);
Seat (P4);
Seat Plate (P5);
Gas Lift (P6);
Star Base (P7);
5 x Castors (P8);
4 x Small Bolts 8 x Large Bolts 8 x Washers
Allen Key
(H4)
2 x Large
Bolts (H2)
Seat (P4)
Right Arm (P3)
(H2)
(H3)
2 x Washers
(H3)
(H4)
Unzip the zippers on Right Arm (P3) to find the screw holes inside;
Lay down the Seat (P4) on floor.
Fix Right Arm (P3) on Seat (P4) with 2 x Large Bolts (H2) and 2 x Washers (H3) but do not
fully tighten bolts (leave loose).
Insert 5 x Castors (P8) into the Star Base (P7) as shown. Push down firmly on each castor to ensure they
are fixed in position. Insert the Gas Lift (P6) into the top of Star Base (P7).
Allen Key
(H4)
2 x Large
Bolts (H2)
Backrest (P1)
Right Arm (P3)
(H2)
(H3)
2 x Washers
(H3)
(H4)
Insert the Back (P1) and align it with the holes in the Right Arm (P3).
Fix Right Arm (P3) on Back (P1) with 2 x Large Bolts (H2) and 2 x Washers (H3) but do not
fully tighten (leave loose).
Step 4
Step 3
Backrest (P1)
Left Arm (P2)
(H2)
(H3)
(H4)
Turn over the Back (P1), Seat (P4) and Right Arm (P3) on floor.
Unzip the zippers on Left Arm (P2) to find the screw holes inside.
Fix Left Arm (P2) on Back (P1) with 2 x Large Bolts (H2) and 2 x Washers (H3) but do not
fully tighten (leave loose).
Allen Key
(H4)
2 x Large
Bolts (H2)
2 x Washers
(H3)
Page 6
Seat (P4)
Left Arm (P2)
(H4)
Fix Left Arm (P2) on Seat (P4) with 2 x Large Bolts (H2) and 2 x Washers (H3).
Fully tighten 8 x Large Bolts (H2) on Left Arm (P2) and Right Arm (P3).
4 x Small
Bolts (H1)
Allen Key
(H4)
Note the front facing orientation of the Seat Plate (P5) and align the holes on the Seat Plate (P5) with the
bottom of the Seat (P4) as shown.
Secure the Seat Plate (P5) to the Seat (P4) with 4 x Bolts (H1) by tightening with the Allen Key (H4).
(H1)
(H4)
Allen Key
(H4)
2 x Large
Bolts (H2)
2 x Washers
(H3)
Seat (P4)
Backrest (P1)
Seat Plate (P5)
Step 6
Step 5
Page 7
Position the centre hole of the Seat Plate (P5) over the top of Gas Lift (P6). Carefully lower the Seat (P4)
onto the Gas Lift (P6). Press seat down firmly. Check the connection is secure before sitting in the chair.
Seat Plate (P5) Gas Lift (P6)
Step 8
Step 7
Page 8
/