Razor W20136401003 User manual

Brand: Razor

Model: W20136401003

Type: User manual

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

1

WARNING

Step 1 Step 2

Required Tools: (Not included)

A. Phillips screwdriver

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect

charger before conducting any assembly or maintenance procedures. Failure to follow these

steps in the correct order may cause irreparable damage.

Using a Phillips screwdriver, remove the ﬁve (5) screws

from the side with the power switch.

Pull the cover off. Be careful not to damage the wires for

the charger port and power switch. Set cover aside.

POWER CORE E90 SPRINT BATTERY

REPLACEMENT PROCEDURES

PART # W20136401003

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciﬁc Time.

2

Step 3

Step 5

Step 4

Using a Phillips screwdriver, remove the two (2) screws

(on both sides of the battery) from the battery strap.

Remove battery strap and set aside.

Locate and disconnect the battery from the controller.

Remove the battery.

Reverse the steps

• Place the New Battery inside unit

• Re-connect the Battery and Control Module

• Place the Bracket back on the top of the battery

• Re-attach battery cover with screws.

ATTENTION: Charge battery 12 hours before using.

1
2

Razor W20136401003 User manual

Brand: Razor

Model: W20136401003

Type: User manual

Related papers

Other documents