2. Razor
  3. W15110710020
W15110710020

Razor W15110710020 User manual

  • Hello! I've reviewed the user manual for the Razor Front Fender W15110710020, which includes clear instructions on how to replace it using basic tools. I am ready for your questions about the process.
  • What tools are needed for the replacement?
    What is the first step in removing the old fender?
    What is the second step in removing the old fender?
    What should you do after installing new fender?
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1 Step 2
Required Tools: (Not included)
A. Two (2) 5 mm Allen wrenches
B. Phillips screwdriver
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using two (2) 5 mm Allen wrenches, loosen and remove
the axle bolts and slide the wheel down.
Using a Phillips screwdriver, loosen and remove the two
(2) screws that hold the fender onto the fork and slide the
fender out from the fork.
VECTOR FRONT FENDER
REPLACEMENT PROCEDURES
PART # W15110710020
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
/