2. Razor
  3. W13112163017, W13112144017 Power Core E90 Sprint Foot Platforms Replacement
W13112163017, W13112144017 Power Core E90 Sprint Foot Platforms Replacement

Razor W13112163017, W13112144017 Power Core E90 Sprint Foot Platforms Replacement, W13112163017 Operating instructions

  • Hello! I've reviewed the user manual for the Razor Power Core E90 Sprint foot platform replacement. This document provides clear instructions on how to replace the foot platforms using basic tools like an Allen wrench and a Phillips screwdriver. It also emphasizes safety precautions and battery charging instructions. If you have any questions about the replacement process I am ready to help.
  • What tools are needed for the replacement?
    What should I do before starting the replacement?
    How many bolts need to be removed in step 1?
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1 Step 2
Required Tools: (Not included)
A. 6 mm Allen wrench
B. Phillips screwdriver
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a size 6 mm Allen wrench, remove four (4) bolts
from under the foot platform (two (2) on each side). Slide
the platform bracket down.
If replacing only the plastic platform, use a Phillips
screwdriver to remove four (4) screws on top of the
platform (two (2) on each side). Lift the plastic off from the
bracket.
POWER CORE E90 SPRINT FOOT PLATFORMS
REPLACEMENT PROCEDURES
PART # W13112163017/W13112144017
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Reverse the steps.
ATTENTION: Charge battery 12 hours before using.
/