Danfoss BasicGrip - Liquid screed User guide

Application sheet

BasicGrip

Carpet / tiles / parquet / laminate / synthetics

Liquid screed

1 Carpet / tiles / parquet

2 Liquid screed (≥ CAF F5) 50 mm

3 FH composite pipe (16 mm)

4 BasicGrip panel 35mm insulation 35 mm

5 Basic perimeter insulation

Floor nish NA mm Carpet / tiles / parquet / laminate / synthetics

Construction height 85 mm Height excluding oor nish

Weight ~ 110 kg / m² Weight excluding oor nish

Thermal resistance R 0,85 m²K / W The minimum thermal resistance requirement of EnEV is fullled.

Thermal transmission coecient U 0,98 W / m²K

Design load ≤ 2,0 kN / m²

Point load (≥ 20 cm²) ≤ 1,0 kN

Impact subsonic noise reduction 28 dB Calculated value according to DIN 4109; applies to concrete slabs

thicker than 12 cm (DIN 4109: m² > 276 kg/m²).

Application area

Residential spaces, hallways and attic spaces in residential buildings and hotel rooms.

Corresponds to categories A1, A2 and A3 of DIN 1055-3.

Requirements & special features

A screed thickness of 60 mm must be maintained with CAF-F4 tile screeds.

The screed thicknesses must be adjusted in case of higher design load or point load

values.

Observe all installation instructions and manufacturer’s instructions.

Construction

According to EnEV, EN 1264, DIN 4109, 1055 and 18560

Construction number 178

Technical Data Floors/ceilings between rooms at the same temperature

VA.DY.A1.02

Danfoss HES