ROSE DISPLAYS ANOFRAME ROUND WITH LOOP AND SAUCER User manual

Brand: ROSE DISPLAYS

Model: ANOFRAME ROUND WITH LOOP AND SAUCER

Type: User manual

Parts

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

split rails

solid rail

Figure 2

AnoFrame

Step 1

Locate the two split rails and the solid

rail that is the same length as the split

rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid side

Ano rail. Insert one corner bracket

into each end of each split side Ano

rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Insert saucer into end of top Ano rail.

Fig. 3.

Note: It is easier to slide the saucer in

the Ano rail if you hold the cable as

close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in

Fig. 5 sliding sides together in the

order shown.

Step 4

Insert poster. Fig 6.

Instructions For assembly

Incept-8.23.02

Figure 1

Figure 5

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSAnoFRLoopandSaucer

Corner

Brackets

Loop and

Saucer

16-0018SL

AnoFrame Rails

12AF-100

AnoFrame

Split Rails

Figure 4

Figure 6

Round Profile Instruction Sheet

Figure 3

solid rail

split rails

Parts

split rails

solid rail

Figure 2

AnoFrame

Step 1

Locate the two split rails and the solid

rail that is the same length as the split

rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid side

Ano rail. Insert one corner bracket

into each end of each split side Ano

rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Insert saucer into end of top Ano rail.

Fig. 3.

Note: It is easier to slide the saucer in

the Ano rail if you hold the cable as

close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in

Fig. 5 sliding sides together in the

order shown.

Step 4

Insert poster. Fig 6.

Instructions For assembly

Incept-8.23.02

Figure 1

Figure 5

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSAnoFRLoopandSaucer

Corner

Brackets

Loop and

Saucer

16-0018SL

AnoFrame Rails

12AF-100

AnoFrame

Split Rails

Figure 4

Figure 6

Round Profile Instruction Sheet

Figure 3

solid rail

split rails

ROSE DISPLAYS ANOFRAME ROUND WITH LOOP AND SAUCER User manual

ROSE DISPLAYS ANOFRAME ROUND WITH LOOP AND SAUCER User manual

ROSE DISPLAYS ANOFRAME ROUND WITH LOOP AND SAUCER User manual

Related papers

Other documents