ROSE DISPLAYS AnoFrame User manual

Brand: ROSE DISPLAYS

Model: AnoFrame

Type: User manual

Parts

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

split rails

solid rail

Figure 2

Step 1

Locate the two split rails and the

solid rail that is the same length as

the split rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid

side Ano rail. Insert one corner

bracket into each end of each split

side Ano rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Insert saucer into end of top Ano rail.

Fig. 3.

Note: It is easier to slide the saucer in

the Ano rail if you hold the cable as

close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in

Fig. 5 sliding sides together in the

order shown.

Step 4

Insert poster. Fig 6.

Note: The AnoFrame shown here is

a square profile. It is available in

either square or round profile.

AnoFrameTM

Square Profile Instruction Sheet

solid rail

split rails

Instructions For assembly

Incept-8.23.02

Figure 1

Figure 5

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INANFSQCableandSaucer

Corner

Brackets

AnoFrame Rails

12AF-100

AnoFrame

Split Rails

Figure 6

Cable and

Saucer

16-0018SS

Figure 4Figure 3

Parts

split rails

solid rail

Figure 2

Step 1

Locate the two split rails and the

solid rail that is the same length as

the split rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid

side Ano rail. Insert one corner

bracket into each end of each split

side Ano rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Insert saucer into end of top Ano rail.

Fig. 3.

Note: It is easier to slide the saucer in

the Ano rail if you hold the cable as

close to the saucer as possible. Fig 4.

Step 3

Assemble frame following steps in

Fig. 5 sliding sides together in the

order shown.

Step 4

Insert poster. Fig 6.

Note: The AnoFrame shown here is

a square profile. It is available in

either square or round profile.

AnoFrameTM

Square Profile Instruction Sheet

solid rail

split rails

Instructions For assembly

Incept-8.23.02

Figure 1

Figure 5

The AnoFrame is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INANFSQCableandSaucer

Corner

Brackets

AnoFrame Rails

12AF-100

AnoFrame

Split Rails

Figure 6

Cable and

Saucer

16-0018SS

Figure 4Figure 3

ROSE DISPLAYS AnoFrame User manual

ROSE DISPLAYS AnoFrame User manual

ROSE DISPLAYS AnoFrame User manual

Related papers

Other documents