Redback A4658 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Redback A4658 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.redbackaudio.com.au Redback® Proudly Made In Australia 1
Redback® A 4658 Paging Console Power Injector
OVERVIEW
The Redback® A 4658 has been designed to provide external power injection to the new A 4660 Redback Paging Console.
This may be required when the A 4660 is connected via a long Cat5e/6 cable run, or when two paging consoles are cascaded
together and the master unit cannot provide enough power.
The power injector can be inserted in the line between the master unit and the paging console, or in the line between the
rst and second paging consoles.
Figure 1 illustrates an example of both congurations when connected to an A 4580 master unit, but the same applies when
connecting to other master units such as the A 4500C, A 4450, A 4270, A 4489A etc
(Note: the option of cascading consoles is not available on all master units).
The A 4658 is powered from the 24V DC plugpack supplied with the unit.
Fig 1. Connecting A 4658 power injectors into the Cat5e/6 cable run.
Operating Manual
User manual revision number: 1.0 10/07/2023
Redback® A 4658 (Front) Redback® A 4658 (Rear)
Model: A 4660
To Main Unit To 2nd Console
Manufactured in Australia By
Altronic Distributors Pty. Ltd.
www.redbackaudio.com.au
Model: A 4660
To Main Unit To 2nd Console
Manufactured in Australia By
Altronic Distributors Pty. Ltd.
www.redbackaudio.com.au
Cat5e/6 cable
(Max total run to
2nd console 200 Metres)
Manufactured in Australia By Altronic Distributors Pty. Ltd.
From
BGM
AMP
L
R
BGM Out
24V
Switched
Out
From
24V
BATTERY
24V DC
IN
Zone 17-32
From
PA
AMP
Zones
1 2 3 4 5 6 7 8
1/17
34
12
+ -
+ -
2/183/194/205/216/227/238/249/2510/2611/2712/2813/2914/3015/31
16/32
100V Switching -
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplier speakers to ”+” and “-” terminals.
Connect Zone amplier line level inputs to “+” , ” - ” and “ ” terminals.
Preamp Switching -
DIP Switch Settings
SW
1
2
4-8
On O
Single Amp Mode
Not Used
Dual Amp Mode
Line Level Speaker Level
N/O
N/C
+-
www.redbackaudio.com.au
+_
PA Out
BGM Input Evac Input
+_
+_
324V Out Trigger
ON-Evac/OFF-Any
L
R
Extender
16GB
Maximum
Micro
SD Card
+
-
Evac
Trigger
120mA
Max
To Paging Consoles
(Maximum 500mA per output)
+- +- +- +- +- +- +- +- +- +- +- +- +- +- +-
1 2 3 4 5 6 7 8
Model: A 4660
To Main Unit To 2nd Console
Manufactured in Australia By
Altronic Distributors Pty. Ltd.
www.redbackaudio.com.au
Model: A 4660
To Main Unit To 2nd Console
Manufactured in Australia By
Altronic Distributors Pty. Ltd.
www.redbackaudio.com.au
24V DC
PLUGPACK
24V DC
PLUGPACK
Cat5e/6 cable
(Max total run to
2nd console 200 Metres)
A 4660
A 4660
A 4660 A 4660
A 4580
A 4658
A 4658
/