2. JasonL
  3. EWS24-18GB-BE

JasonL EWS24-18GB-BE, EWS36-18GB-BE, EWS36-36GB-BE, EWS48-36GB-BE, EWS48-48GB-BE, EWS61-48GB-BE Operating instructions

  • I've reviewed the assembly instructions for the Echo Panel + Glassboard solution. The document details the steps needed to install the echo panels and securely mount the glassboard using standoffs and brackets. I'm ready to help with any questions you have about the assembly process or components.
  • What should be installed first?
    How is the glassboard attached?
    What should the diameter of the holes be for standoffs?
1 of 3
www.jasonl.com.au
Echo Panel + Glassboard
solution
Need help! Call us on 1300 527 665
A*1 B*1
C*4
D*4 E*4
Echo Panel (size and quantity
varies according to purchase size) Glassboard (size and
quantity varies according
to purchase size)
ASSEMBLY INSTRUCTIONS
3. Make holes on the echo
panels to make way for
standoffs/brackets. Please
note these holes must be
same diameter as provided
standoffs/brackets.
2 of 3
www.jasonl.com.au
Need help! Call us on 1300 527 665
Please install the echo panels to the
wall first following the Echo Pannel
Assembly instructions.
1.
2. Present the glassboard in the
desired location, making sure it is
centered. Place a pencil mark into
the Echo Pannel trough the
Glassboard holes.
Echo Panel + Glassboard
solution
ASSEMBLY INSTRUCTIONS
3 of 3
www.jasonl.com.au
Need help! Call us on 1300 527 665
Use a hammer to place all dawers in
place.
4. 2. Screw the standoffs to the wall. 3. Place the glassboard and secure with
brakets.
Echo Panel + Glassboard
solution
ASSEMBLY INSTRUCTIONS
x4
x4
/