2. JasonL
  3. EMP3512BEB-L

JasonL EMP3512BEB-L Operating instructions

  • Hello! I have reviewed the Assembly Instructions for the Echo L-brackets modesty panel. This document outlines the steps for installing the panel, including drilling and bracket attachments. I'm ready to answer any questions you may have about the assembly process or components.
  • How many people are required for installation?
    Is a power drill needed?
    Are there pre-drilled holes?
ASSEMBLY INSTRUCTIONS
Echo modesty panel
with L-brackets
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Echo Plate x 1
L Bracket x2
Clamps cover x2
Screws x4
Wood screws x 4
A
B
C
D
E
COMPONENTS
D
B
C
Experienced assembly is required. User will need to drill wood screws into underside of desk. No pre-drilled holes are provided for this system.
Power Drill tool is required.2 Persons required for installation *
A
ASSEMBLY INSTRUCTIONS
Echo modesty panel
with L-brackets
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 01
Please drill two holes using 8mm drill bit having a 32.5 mm gap between
screw holes. Please measure the distance from the top of the panel to
ensure that the top plate bracket will sit flush with the echo modesty
panel.
Assembe A plate with B bracket and tighten using 4 x screws provided
(D) and apply the bracket cover C
250 mm
STEP 02
AB
D
C
ASSEMBLY INSTRUCTIONS
Echo modesty panel
with L-brackets
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Please assemble Echo panel with desktop using L brackets. Please drill 4 x wood screws (E) into the underneath desk and tighten
the L brackets on the desk. We recommend installing the modesty
panel around 100mm from the edge of the top.
STEP 04
STEP 03
100 mm
ASSEMBLY INSTRUCTIONS
Echo modesty panel
with L-brackets
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
/