Anova BRP302 Assembly Instruction

Brand: Anova

Model: BRP302

Type: Assembly Instruction

anovafurnishings.com

888.535.5005 tel

TOOLS NEEDED:

• Ratchet with 9/16" Socket

• 9/16" Wrench

Assembly Instructions

Ultra

BRP302

COMPONENT PARTS:

ASSEMBLY HARDWARE: All hardware is stainless steel.

(2) End Sections (1) Center Section (2) Supports

(16) 3/8" x 1 1/2"

Hex Head Bolt

(32) 3/8" Flat

Washers

(16) 3/8"-16

Drylock Nut

ASSEMBLY:

Inspect the shipping container contents for damage and to

determine that all components and hardware are present.

2. Lay all parts on a so work surface or on the shipping

packaging to prevent damage to nish.

NOTE: Before assembling the nuts to the bolts, it is

recommended that a light oil or petroleum jelly be applied

to the screw threads.

Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.

3. One at a time, align Center Section holes above End Section

holes as shown.

Using 4 bolts, 4 nuts, and 8 washers, secure the Center and

End Section together as shown, nger tight.

Using 4 bolts, 4 nuts, and 8 washers, secure the Supports

and End Section together as shown, nger tight.

Aer everything is in place, tighten all hardware with the

Ratchet and 9/16" Wrench. Retighten all hardware aer

two weeks.

Replacement Parts

End Section

Support

Center Section

4. Align both Supports' holes above End Section holes as

shown.

5. Repeat steps 3-4 with the other End Section.

Anova BRP302 Assembly Instruction

Anova BRP302 Assembly Instruction

Anova BRP302 Assembly Instruction

Related papers

Other documents