VIA Technologies ARTiGO-A1200 Quick Manual

Brand: VIA Technologies

Model: ARTiGO-A1200

Type: Quick Manual

Specifications:

Specifications:Specifications:

Specifications:

•

CPU:

CPU:CPU:

CPU:

VIA Eden™ X2 1.0GHz processor (1066MHz FSB)

•

1066MHz Front Side Bus speed

•

2 MB L2 Cache memory

•

System Chipset:

System Chipset: System Chipset:

System Chipset:

VIA VX900 Unified Digital Media IGP chipset

•

System Memory:

System Memory: System Memory:

System Memory:

1 x SODIMM slot supporting DDR3 1066 SDRAM

•

Supports up to 4 GB memory size

•

Graphics:

Graphics:Graphics:

Graphics:

Integrated VIA Chrome9 HD DX9 3D/2D graphics and

video processor with MPEG-2, WMV9/VC1 and H.264

video decoding accelerator

•

Storage:

Storage:Storage:

Storage:

•

1 x 2.5” hard disk bay for 2.5” SATA HDD or

2.5” Flash SSD

•

1 x CFast card socket for Type I/II

•

LAN:

LAN:LAN:

LAN:

VIA VT6130 Gigabit Ethernet controller

•

Audio:

Audio:Audio:

Audio:

VIA VT2021 Blue Ray High Definition Audio Codec

ARTiGO-A1200

Quick Guide

Key Features:

Key Features:Key Features:

Key Features:

• Fanless, Ultra Slim, Ultra Compact, Space Saving

and Low Power Consumption

• Support USB 2.0 and 3.0, and Gigabit Ethernet port

• Support HDMI

port and VGA connector

• Support 2.5-inch SATA hard disk and CFast socket

• Support 3G/WLAN miniPCIe slot with one SIM

socket

The ARTiGO-A1200 is a fanless and ultra compact system. It is

based on the VIA EITX-2000 embedded board powered by a high

performance dual core 64-bit VIA Eden™ X2 1.0GHz processor.

The ARTiGO-A1200 system is designed with an elegant aluminum

chassis and has a wide selections of interfaces on the front and real

I/O panels to easily support various applications, easy integration

and quick setup. In addition, the ARTiGO-A1200 is a low power

consumption system and fully compatible with Microsoft Windows

and Linux operating systems.

Packing List:

Packing List:Packing List:

Packing List:

•

1 x ARTiGO-A1200 system

•

1 x AC-to-DC power adapter, DC 12V/5A, 60W

•

1 x Software driver and utility CD disc

•

1 x Quick Guide

Installing CFast Card

Installing CFast CardInstalling CFast Card

Installing CFast Card

Step 2

Step 2Step 2

Step 2

Locate the DDR3 SODIMM memory socket. Gently insert the

DDR3 memory module into the SODIMM socket at 30 degrees

angle. Push down the memory module until it snaps into place.

Installing the Memory

Installing the MemoryInstalling the Memory

Installing the Memory

•

System Indicator:

System Indicator:System Indicator:

System Indicator:

•

Power Status LED (green LED)

•

Hard Disk Drive Activity LED (red LED)

•

BIOS:

BIOS:BIOS:

BIOS:

AMI BIOS

•

8 Mbit SPI flash memory

•

Front I/O panel:

Front I/O panel:Front I/O panel:

Front I/O panel:

•

Power On/Off Button Switch

•

Power Status LED indicator

•

HDD Activity LED indicator

•

1 x VGA connector

•

1 x HDMI

port

•

1 x USB 3.0 port (optional)

•

2 x RJ-45 port (Gigabit Ethernet connection)

•

1 x CFast socket

•

Rear I/O panel:

Rear I/O panel:Rear I/O panel:

Rear I/O panel:

•

DC jack power input connector

•

2 x COM connectors (default as RS-232)

•

4 x USB 2.0 ports

•

2 x

3.5

Audio jacks (Line-Out and Mic-In)

•

Left Side I/O panel:

Left Side I/O panel:Left Side I/O panel:

Left Side I/O panel:

•

2 x Reserved antenna holes for WLAN and 3G

miniPCIe adapters

•

Dimensions:

Dimensions:Dimensions:

Dimensions:

234 mm (W) x 30 mm (H) x 124 mm (D)

•

Weight:

Weight: Weight:

Weight:

1.2 Kg (2.64 lbs) net weight

•

Operating Temperature:

Operating Temperature:Operating Temperature:

Operating Temperature:

0°C up to 45°C

•

Storage Temperature:

Storage Temperature: Storage Temperature:

Storage Temperature:

-10°C ~ 60°C

•

Relative Humidity:

Relative Humidity:Relative Humidity:

Relative Humidity:

0% ~ 90% @ 45°C, non-condensing

•

Vibration During Operation (with CFast card only):

Vibration During Operation (with CFast card only):Vibration During Operation (with CFast card only):

Vibration During Operation (with CFast card only):

▪

1Grms, IEC 60068-2-64, random, 5~500Hz,

1 Oct./min, 1 hr/axis

Step 3

Step 3Step 3

Step 3

Flip over the top cover. Then remove the memory thermal pad protective

cover (plastic) on the memory heatsink.

Barebone System with EITX

Barebone System with EITXBarebone System with EITX

Barebone System with EITX-

-2000 Board

2000 Board2000 Board

2000 Board

•

Shock During Operation (with CFast card only):

Shock During Operation (with CFast card only):Shock During Operation (with CFast card only):

Shock During Operation (with CFast card only):

▪

10G, IEC 60068-2-27, half size, 11ms duration

•

Software Compatibility (Operating System)

Software Compatibility (Operating System)Software Compatibility (Operating System)

Software Compatibility (Operating System)

▪

Microsoft Windows 7

▪

Microsoft Windows XP

▪

Microsoft Windows XP Embedded

▪

Microsoft Windows Embedded Standard 7

▪

Linux

Note:

Note:Note:

Note:

Please ensure that all items in the packing list are present before

using this product. If any of the items are missing or damaged,

contact your distributor or sales representative immediately.

Rear I/O Panel Layout

Rear I/O Panel LayoutRear I/O Panel Layout

Rear I/O Panel Layout

Side I/O Panel Layout

Side I/O Panel LayoutSide I/O Panel Layout

Side I/O Panel Layout

Front I/O Panel Layout

Front I/O Panel LayoutFront I/O Panel Layout

Front I/O Panel Layout

Step 1

Step 1Step 1

Step 1

Remove the top cover from the chassis by unscrewing the ten screws to

locate the DDR3 SODIMM memory socket.

Step 1

Step 1Step 1

Step 1

Remove the CFast socket cover by unscrewing the two screws.

Step 2

Step 2Step 2

Step 2

Insert the CFast card into the CFast socket. Ensure the proper orientation

is correct before inserting the card. Reinstall the CFast socket cover and

secure it with screws.

P/N: 99G51-013154-10

For more information on this and

other VIA products, please visit

www.viaembedded.com

Step 3

Step 3Step 3

Step 3

Reinstall the brackets with 2.5” SATA hard disk by aligning the

brackets on the standoff mounting holes. Then secure the

brackets with four screws.

VIA Technologies, Inc.

VIA Technologies, Inc.VIA Technologies, Inc.

VIA Technologies, Inc.

1F, 531, Zhong-zheng Road,

Xindian District, New Taipei City 231,

Taiwan

Tel: 886-2-2218-5452

Fax: 886-2-2218-5453

Web: www.via.com.tw

Step 1

Step 1Step 1

Step 1

On the bottom side of the top cover, remove the SATA 2.5” hard

disk drive brackets.

Installing 2.5

Installing 2.5Installing 2.5

Installing 2.5-

-inch

inchinch

inch

SATA Hard Disk

SATA Hard DiskSATA Hard Disk

SATA Hard Disk

Step 4

Step 4Step 4

Step 4

Connect the SATA data and power cables into the system board

and connect the other end of the cables into the 2.5” SATA hard

disk.

Step 2

Step 2Step 2

Step 2

Attach the brackets to the 2.5-inch SATA hard disk then secure it

with four screws.

Inserting 3G SIM Card

Inserting 3G SIM CardInserting 3G SIM Card

Inserting 3G SIM Card

Step 1

Step 1Step 1

Step 1

Push back firmly the SIM card socket to unlock and open. Pull up

the socket and place the SIM card in the socket.

Step 2

Step 2Step 2

Step 2

Gently close the socket by pulling down the SIM socket

containing with SIM card then carefully lock the SIM slot as

indicated in the figures.

Note:

Note:Note:

Note:

Ensure the angled

corner of the SIM

card is placed in

the correct way

before closing the

socket.

Installing 3G and

Installing 3G and Installing 3G and

Installing 3G and

WLAN kit

WLAN kitWLAN kit

WLAN kit

Step 1

Step 1Step 1

Step 1

Align the notch on the miniPCIe (3G/WLAN) module with the

notch on the miniPCIe slot then insert the module at 30° angle.

Step 2

Step 2Step 2

Step 2

Once the module has been fully inserted, push down the

module until the screw hole align with the standoff hole then

secure the module with screw.

Step 3

Step 3Step 3

Step 3

Locate the 3G/WLAN antenna holes at the rear side of the

chassis. Insert the 3G/WLAN port connectors into the antenna

holes from the inside of the chassis. Insert the washer and fasten

it with the nut then install the external antenna.

Step 4

Step 4Step 4

Step 4

Gently connect the mini coaxial cables of the 3G/WLAN port

connectors to the mini RF connectors on the 3G/WLAN miniPCIe

module.

Dimensions

DimensionsDimensions

Dimensions

Installing the Chassis

Installing the Chassis Installing the Chassis

Installing the Chassis

Top Cover

Top CoverTop Cover

Top Cover

Front View

Front ViewFront View

Front View

Side View

Side ViewSide View

Side View

Step 1

Step 1Step 1

Step 1

Align and install the top cover with the chassis and secure it with

ten screws.

VIA Technologies ARTiGO-A1200 Quick Manual

VIA Technologies ARTiGO-A1200 Quick Manual

VIA Technologies ARTiGO-A1200 Quick Manual

Related papers

Other documents