Edsal PSB6500 Assembly Manual

Brand: Edsal

Model: PSB6500

Type: Assembly Manual

Edsal PSB6500 is a heavy-duty steel bin unit designed for efficient organization and storage in various industrial and commercial settings. With its sturdy construction and versatile design, the PSB6500 offers ample space and flexibility to accommodate a wide range of items, making it ideal for warehouses, factories, workshops, and retail stores.

The unit features multiple adjustable shelves that can be positioned at different heights to suit specific storage needs. The shelves are supported by durable posts and secured with Kwik-Klip fasteners, allowing for quick and easy assembly and reconfiguration. The bin unit also includes side and back braces that provide stability and prevent swaying, ensuring the safe storage of heavy items.

Installation Addendum For Bin Unit

STEP 1: install one shelf with the four (4) post to create the

bottom of the unit (See Figure 1). Start by aligning the holes

from the shelf to the third hole from the bottom of the post.

Insert the screws through the post and shelf and fasten with

the nuts provided (See Figure 2).

STEP 2: Install one shelf to the 4 post to create the top of the

unit. Start by aligning the holes from the shelf to the top holes

of the four (4) post. Insert the screws through the post and

shelf and fasten with the nuts provided (See Figure 3).

STEP 3: Install 2nd shelf from top shelf. Start by counting

down eight (8) holes from the top hole of the post. Insert the

Kwik-Klip’s top tab into the eigth(8) hole from the top of the

post, and the Kwik-Klip’s bottom tab into the ninth (9) hole

from the top of the post (See Figure 4). Repeat this step on

the three (3) remaining post, then continue by installing the

second (2) shelf onto the clips.

STEP 4: Finish installing the remaining ten (10) shelves by

placing the top tab of a Kwik-Klip every five (5) holes counting

down five holes from the bottom tab of the Kwik-Klip that was

previously installed. Complete this process on all four (4)

post. Then continue by installing the shelves onto the clips

(See Figure 5).

STEP 5: Install the side braces in a criss-cross manner on

both sides of the assembled unit. Start by counting down

twenty two holes (22) from the top hole of the back post.

Align one (1) hole of the side brace with the hole of the post.

Insert a screw through the side brace and post, and fasten

with the nuts provided. Take the opposite end of the side

brace and count down forty nine (49) holes from the top hole

of the front post (See Figure 6). Align the hole of the brace

with the hole of the post. Insert a screw through the side

brace and the post, and fasten with the nuts provided. Con-

tinue by doing the same procedure for the opposite side of the

unit for the installation of the remaining side braces.

STEP 6: Install back braces in a criss-cross manner to the

back of the unit. Start by counting down fifteen holes (15)

from the top hole of the left back post. Align one (1) hole of

the back brace with the hole of the post. Insert a screw

through the back brace and the post, and fasten with the nut

provided. Take the opposite side of the back brace and count

down thirty nine (39) holes from the top hole of the right back

post (See Figure 7). Align the hole of the back brace with the

hole of the post. Insert a screw through the back brace and

the post, and fasten with the nut provided. Continue by fas-

tening the opposite end of the back braces to the opposite

end of the unit using the same procedure.

Figure 1

Figure 2

Top Hole

Third Hole

Form Bottom

Figure 3

Figure 4

Klip Top Tab

Klip Bottom Tab

Figure 6

22nd Hole

49th Hole

15th Hole

39th Hole

Figure 7

Figure 5

Edsal PSB6500 Assembly Manual

Edsal PSB6500 Assembly Manual

Edsal PSB6500 Assembly Manual

Related papers

Other documents