Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
3320 - INSTRUCTIONS
Hardware:
J) Assembly Key ● K) Long Bolts(8) ● L) Short Bolts(4) ● M) Caps(8)
Parts:
A) Seat ● B) Back ● C) Right Arm ● D) Left Arm ● E) Mechanism ● F) Sleeve ● G) Cylinder ● H) Base ● I) Casters(5)
J
K
L M
A B
C D
E
F
G H I
STEP 2: Insert Cylinder(G) into Base(H).
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 1: Insert 5 Casters(I) into Base(H).
STEP 3: Insert Sleeve(F) over Cylinder(G).
I H
G
H
STEP 4: Attach the Mechanism(E) to the Seat(A) using 4 Short Bolts(L). Be sure that the tilt tension knob is facing the front of the seat.
Note: Do NOT tighten bolts until all bolts have been started.
E
STEP 5: Attach Back(B) to Seat(A) by attaching Right Arm(C) with 4 Long
Bolts(K). Repeat this step for the Left Arm(D). Place Caps(M) over inserts.
Note: Do NOT tighten bolts on each arm until all bolts have been started.
STEP 6: Finish by placing Cylinder(G) into
Mechanism(E) and apply force to the seat to ensure
connection.
A
A
3320 - INSTRUCTIONS
G
F
Right Side Left Side
B
K
K
K K
A
C
D
K
K
K K
L
LL
L
/
