Workrite Ergonomics Tranquility Shoji Screen Installation guide

Type
Installation guide
1 of 2 Workrite Ergonomics | (800) 959–9675 www.workriteergo.com
Three Tranquility Panels No tools are required to install the Shoji Strap
Loosen Strap Loops for Attachment and Adjust Rounded Rings
Insert Tranquility Panels Through Loops
A Shoji Strap Assembly
Qty: 2
Required, Sold Separately Tools Required
Parts Included
Assembly & Installation Instructions,
Tranquility Shoji Strap Kit:
TRQ-MNT-SSCREEN3PNL-XXXX
Panel side
Outer
Inner
Top View
Strap Tail
Rings
Strap Tail
Rounded Ring
Rounded Ring
Rounded Ring
Panel side
Outer
Inner
Top View
Strap Tail
Rings
Rounded Ring
Rounded Ring
Panel side
Outer
Inner
Top View
Strap Tail
Rings
Rounded Ring
Rounded Ring
1
2
2 of 2 Workrite Ergonomics | (800) 959–9675 www.workriteergo.com
#1500329 Rev A
Cleaning Instructions
Vacuum clean regularly. Professional dry cleaning is recommended for treating marks or stains.
For self treatment, treat stains immediately by wiping clean with pH neutral soap and a damp cloth.
Tighten Strap
Hold the strap with your leξ€Ÿ hand, then pull out the strap
tail with your right hand to tighten the belt. This tension
will cause the two rounded rings to function as hinges.
Apply the Second Strap
Flip the panels to apply other strap.
Insert the panels through loops then tighten strap as above.
Strap Tail
Rounded Ring
Rounded Ring
3
4
βœ“
a
a
b
b
  • Page 1 1
  • Page 2 2

Workrite Ergonomics Tranquility Shoji Screen Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI