2. TRAN LED
  3. VEVE
VEVE

TRAN LED VEVE Installation guide

  • I have read the installation instructions for Q-Tran's linear fixtures, including mounting options using screws, magnets, silicone, and VHB tape. The document details the hardware and steps for each method, and I'm ready to answer any questions you have about installing your fixture.
  • How many clips are provided for fixtures 4 feet or less?
    Which type of screw is used for the magnet bracket?
    What should be kept in mind when using magnet clips?
    What is the recommended curing time for 832 silicone?
    Is the 832 silicone suitable for submersible applications?
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com Specification subject to change. Rev-02-23-22
INSTALLATION Linear Fixtures - VEVE
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
Mounting
NOTE: 2 clips provided for 4’ or less;
4 clips provided for greater than 4’
.20
"
.81"
1.25"
1.25"
.20
"
.20
"
.81"
Stainless Steel Clip
(SST-01)
Magnet Clip
(MG-01)
HARDWARE
#6x5/8" Flat head screw
(Included)
#4x5/8" Flat head screw
(Included)
12"
.75"
.23"
2.5"
.64"
.26
"
.625"
.21
"
.625"
Magnet Mount Accessory
(MMA)
(Sold separately)
NOTE:
Apply silicone in a well ventilated area. 832 Silicone is sold with caulking gun. Do not use in any submersible applications.
NOTE:
The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection
.
Using the #6 Flat head screws, mount two screws into the 12”
magnet bracket through the slotted holes at each end
Attach the magnet clips onto the extrusion Connect the assembled extrusion and its magnet clips to the magnet
bracket, the install should match the section view
VHB Mounting
832 Silicone Mounting
Magnet Mounting
Screw Mounting
#4x5/8"
Flat head screw
#6x5/8"
Flat head screw
.21
"
.625"
.26
"
.625"
3.
1.
24" - 30"
2.
3.
1. 2.
Section View
3.
2.
20
MINS
24" - 30"
1.
832
3.
2.
1.
/