Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
1015 - INSTRUCTIONS
Hardware:
G) Assembly Key ● H) Long Bolts(4) ● I) Washers(4) ● J) Short Bolts(4) ● K) Arm Washer
Parts:
A) Arms(2) ● B) Mechanism ● C) Casters(5) ● D) Base ● E) Cylinder ● F) Seat
A
B
C
D
E
F
G
H
I
J
K
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 1: Insert 5 Casters(C) into Base(D). STEP 2: Insert Cylinder(E) into Base(D).
C D
E
D
1015 - INSTRUCTIONS
STEP 3: Add 1 Washer(I) to each Short Bolt (J) and attach Mechanism(B) to Seat(F). Be sure that
the tilt tension knob is facing the front of the seat.
Note: Do NOT tighten Bolts until all bolts have been started.
B
F
J
J
J
J
STEP 4A: Lay seat on one side and place Arm Washer(K) over
each arm hole. Then attach arm to seat with 2 Long Bolts(H)
going through Arm(A), arm washer and nally into Seat(F).
STEP 4B: Repeat this step for second Arm(A).
K
H
H
A
F
STEP 5: Finish by placing Mechanism(B)
on Seat(F) into Cylinder(E) on Base and
apply force to the seat to ensure connection.
B
E
/
