Regency HD1950BK Installation guide

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Do not tighten all screws/bolts until completely assembled.

Keep all hardware parts out of reach of children.

Any problems or questions call Regency Ofﬁ ce Furniture at 1-866-816-9822

Organize your parts.

Brody Sit-Stand Chair • 1950 • INSTRUCTIONS

Parts :

A: Base

B: Gas Lift

C: Seat

STEP 1 : Attach Gas Lift(B) to Base(A) by lining up post with

hole and pressing into locked position.

STEP 2 : Attach Seat(C) to Gas Lift(B) by lining up hole

with post and pressing into locked position.

NOTE: Make sure

Seat(C) is facing the front of the Base(A).

front

rear

This manual is also suitable for