Page is loading ...
199
10°
10°
Ø49
Ø42
(1-15/16˝)
70
Projector
Attachement plate
369– 449
(14-17/32˝–17-11/16˝)
Adjustable in
20 mm (25/32˝) steps
Adjustable in
20 mm (25/32˝) steps
65 (2-9/16˝)
(2-3/4˝)
(1-21/32˝)
(7-27/32˝)
176
(6-15/16˝)
432
(17˝)
436 (17-5/32˝)
13 (1/2˝)
*
3-Ø9.5 (3/8˝)
Ø8.5(11/32˝)
20 (2-9/16˝)
150 (5-29/32˝)
424–507 (16-11/16˝–19-31/32˝)
160 (6-5/16˝)
140 (5-1/2˝)
110 (4-11/32˝)
130 (5-1/8˝)
100 (3-15/16˝)
S PEC F ILE
ET-PKF100H
Ceiling mount bracket
As of June 2008 < 1 >
Specifications Vertical correction angle: +20°, -5°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions (W x H x D): 435 x 424 – 507 x 254 mm
(17-1/8˝ x 16-11/16˝–19-31/32˝ x 10˝)
Note: Height (H) include holding brackets.
Weight: 2.7 kg (6.0 lbs)
Attachment plateIllustration shows the bracket attached to the
PT-F300NT/F300/FW300NT/FW300.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . . . . . . . . .1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . .1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . .1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . .1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . .1
Holding bracket A . . . . . . . . . . . . . . . . . . . . . . .1
Holding bracket B . . . . . . . . . . . . . . . . . . . . . . .1
Washer-fitted hexagonal bolts (M6 x 12) . . . . .15
Hexagonal screws (M6 x 8) . . . . . . . . . . . . . . . .4
Washer-fitted screws (M4 x 12) . . . . . . . . . . . . .8
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be us ed when mounting LCD projectors to the heigh ceiling.
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has s ufficient s trength.
• Read the enclosed mounting instructions thoroughly before s tarting.
• When the product is no longer going to be used, have it dispos ed of quickly by a professional
disposal service.
• Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or simi-
lar tool.)
S PEC F ILE
ET-PKF100H
Ceiling mount bracket
As of October 2008 < 2 >
195
10°
10°
Ø49
Ø43
(1-15/16˝)
70
Projector
Attachement plate
369– 449
(14-17/32˝–17-11/16˝)
Adjustable in
20 mm (25/32˝) steps
65 (2-9/16˝)
(2-3/4˝)
(1-11/16˝)
(7-11/16˝)
176
(6-15/16˝)
432
(17˝)
435 (17-1/8˝)
13 (1/2˝)
3-Ø9.5 (3/8˝)
Ø8.5(11/32˝)
20 (2-9/16˝)
150 (5-29/32˝)
160 (6-5/16˝)
140 (5-1/2˝)
110 (4-11/32˝)
130 (5-1/8˝)
100 (3-15/16˝)
Attachment plateIllustration shows the bracket attached to the
PT-F200NT/F200.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
/
