Panasonic ETPKE200H User manual

Panasonic
Brand
Panasonic
Model
ETPKE200H
Category
Projector mounts
Type
User manual

Panasonic ETPKE200H

Panasonic ETPKE200H is a ceiling mount bracket for high ceilings. It is used when mounting a Panasonic’s applicable projector to high ceilings. This ceiling mount bracket cannot be used by itself. It must be combined with the optional bracket assembly ET-PKE200B.

The vertical correction angle is +10°, -40°, the horizontal slant correction angle is ±15°, and the horizontal turn correction angle is ±10°. The dimensions are (W × H × D): 264 × 864 – 1,464 × 264 mm (10-13/32 × 34-1/32 – 57-5/8 × 10-13/32 inches). The weight is approximately 5.2 kg (11.5 lbs).

Panasonic ETPKE200H

Panasonic ETPKE200H is a ceiling mount bracket for high ceilings. It is used when mounting a Panasonic’s applicable projector to high ceilings. This ceiling mount bracket cannot be used by itself. It must be combined with the optional bracket assembly ET-PKE200B.

The vertical correction angle is +10°, -40°, the horizontal slant correction angle is ±15°, and the horizontal turn correction angle is ±10°. The dimensions are (W × H × D): 264 × 864 – 1,464 × 264 mm (10-13/32 × 34-1/32 – 57-5/8 × 10-13/32 inches). The weight is approximately 5.2 kg (11.5 lbs).

S P E C F I L E
ET-PKE200H
Ceiling mount bracket for high ceilings
As of April 2012
SFL12A009
1 / 1
Specifications
Vertical correction angle: +10°, -40°
Horizontal slant correction angle: ±15°
Horizontal turn correction angle: ±10°
Dimensions (W × H × D): 264 × 864–1,464 × 264 mm
(10-13/32 × 34-1/32– 57-5/8 × 10-13/32 inches)
Weight: Approx. 5.2 kg* (11.5 lbs*)
Applicable bracket assembly: ET-PKE200B
Parts
Projector mount bracket A (pole included) . . . . . 1
Projector mount bracket B (pole included) . . . . . 1
Pole joint bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hexagonal nut (M6) . . . . . . . . . . . . . . . . . . . . . . 1
Snap pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screws (M3 × 10) . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on models.
Description
This ceiling mount bracket is used when mounting a Panasonic’s applicable projector to high ceilings.
N
OTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
∅ 54
4-∅ 54
(2-1/8)
*
2
951–1,551
(37-7/16 – 61-1/16 )
184.5
(7-1/4)
185.5
(7-5/16)
489.5
(19-9/32)
60
(2-3/8)
60
(2-3/8)
120
(4-23/32)
60
(2-3/8)
60
(2-3/8)
120
(4-23/32)
Projector
4-10
× 14
(13/32
× 9/16)
Adjustable in
30 mm (1-3/16) steps
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKE200B and the
PT-EZ570/EZ570L/EW630/EW630L/EX600/EX600L/
EW530/EW530L/EX500/EX500L is attached.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
  • Page 1 1

Panasonic ETPKE200H User manual

Panasonic
Brand
Panasonic
Model
ETPKE200H
Category
Projector mounts
Type
User manual

Panasonic ETPKE200H

Panasonic ETPKE200H is a ceiling mount bracket for high ceilings. It is used when mounting a Panasonic’s applicable projector to high ceilings. This ceiling mount bracket cannot be used by itself. It must be combined with the optional bracket assembly ET-PKE200B.

The vertical correction angle is +10°, -40°, the horizontal slant correction angle is ±15°, and the horizontal turn correction angle is ±10°. The dimensions are (W × H × D): 264 × 864 – 1,464 × 264 mm (10-13/32 × 34-1/32 – 57-5/8 × 10-13/32 inches). The weight is approximately 5.2 kg (11.5 lbs).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents