Dakota Digital VLC-63C-VET Mounting Manual

Manual # 650465

VLC-63C-VET

Dakota Digital VHX Clock Installation

For 1963-‘67 Corvette

Your new VLC-63C-VET kit includes:

Installation

CAT5 Cable

VLC Clock

Installation Manuals

Power Harness

1. Disconnect and remove the original clock. This is a direct replacement so no existing parts

or hardware will be reused.

2X Thumb Nuts

Manual # 650465

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect the CAT5 cable and the

power harness to the clock. Route the

other ends to the VHX control box.

Refer to enclosed clock operating

manual for these connections and

setup.

2. With the original clock removed, carefully maneuver the VLC clock in place while lining

up the mounting studs into location and secure the gauge with the two supplied thumb

nuts.