Dakota Digital VLK-49F Mounting Manual

Manual # 650420:B

VLC/VLK-49F

Dakota Digital VHX Clock Installation

For 1949-‘50 Ford cars

Your new VLC/VLK-49F kit includes:

Installation

2X 8-18 x 3/4”

Screws

CAT5 Cable

VLC Clock

Installation Manuals

1. Remove the original clock by

disconnecting the wiring and removing

two screws behind the dash.

Switch Harness

VLC Power Harness

CAT5 Cable

2X 8-18 x 3/4”

Screws

VLK Clock

Manual # 650420:B

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

2. Secure the clock to the dash using the two

supplied screws.

3. Connect the CAT5 cable and switch harness or VLC power harness to the clock and

carefully route these back to the VHX control box and refer to the Operating Manual to

complete the VHX clock setup.

Download PDF