Manual # 650356A
VLC\VLK-57C
Dakota Digital VHX Clock Installation
For ‘57 Chevy Rectangular Clocks
Your new VLC\VLK-57C kit should include:
Installation
VLK Clamp
2X Thumb Nuts
(VLC & VLK)
CAT5 Cable
(Connects VLC\VLK
Clock to VHX Control
VLK Clock
Installation Manuals
1. The clock should be inserted into
the stock clock location from the
front.
VLC Clock OR
X2 VLC Clamp’s
VLC Clock Harness
Manual # 650356A
4510 W. 61
st
St. N., Sioux Falls SD 57107
Phone: (605) 332-6513 Fax: (605) 339-4106
www.dakotadigital.com
2. Slide the U-clamp or L-clamps
over the studs from the back,
tighten the thumb nuts to
secure the clock into the dash.
3. Connect the CAT5 cable to
the clock. Route this cable
back to the VHX control box.
4. Refer to the Operating Manual to complete the clock setup.
/
