Dakota Digital HLC-63C-VET Mounting Manual

Manual # 650626

HLC-63C-VET

Dakota Digital Clock Installation

For 1963-‘67 Corvette

Installation

Installation Manual

HLC Clock

HLC-63C-VET Includes:

Harness

1. Disconnect and remove the original clock. This is a direct replacement so no existing parts or

hardware will be reused.

2X Thumb Nuts

Manual # 650626

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect the provided harness to the

clock. Route the other end to the HDX

control box. Refer to clock operating

manual for setup.

2. With the original clock removed, carefully

maneuver the HLC clock in place while lining up

the mounting studs into location and secure the

gauge with the two supplied thumb nuts.