Dakota Digital VLC-42F Installation guide

Type
Installation guide
Manual # 650539
VLC-42F
Dakota Digital VHX Clock Installation
For 1942-48 Ford Car
Your new VLC-42F kit includes:
Installation
CAT5 Cable
VLC Clock
Installation Manuals
Power Harness
1. Disconnect and remove the original clock. Retain the factory hardware for re-assembly.
Manual # 650539
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect the CAT5 cable and the power harness to the clock. Route the other ends to the VHX
control box. Refer to enclosed clock operating manual for these connections and setup.
2. With the original clock removed, carefully maneuver the VLC clock in place while lining up the
mounting locations and secure the gauge with factory hardware from disassembly.
  • Page 1 1
  • Page 2 2

Dakota Digital VLC-42F Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI