2. Razor
  3. W13110002049
W13110002049

Razor W13110002049 Operating instructions

  • Hello! I have reviewed the user manual for the POWER A2 front wheel replacement. This document provides the necessary steps and tools needed to replace the front wheel and also mentions a safety warning. I'm ready to answer any questions you may have regarding this process or regarding the device described in this manual.
  • What tools are needed for front wheel replacement?
    What safety precaution should be taken before starting the procedure?
    What is the second step?
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Paciļ¬c Time.
1
WARNING
Step 1 Step 2
Required Tools: (Not included)
A. Two (2) 5 mm Allen wrenches
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using two (2) 5 mm Allen wrenches, loosen the axle bolt
from the fork. Slide the wheel down.
Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
POWER A2
FRONT WHEEL REPLACEMENT PROCEDURES
PART # W13110002049
/