TMI Products Chevy Truck 1988-98 Visor Installation guide

Brand: TMI Products

Model: Chevy Truck 1988-98 Visor

Type: Installation guide

1. Phillips Screwdriver

2. Razor Blade

Sun Visor

Parts:

Step 1: Remove factory Sun visors; be sure

to keep factory screws and retaining bracket as

they’ll be used with your TMI Sun Visors. Twist

off retaining bracket along with the rod from

factory sun visors and install them into TMI sun

visors. *Note: It’s going to be a tight

fit and will require a firm push.

Step 2: If you’re using a new headliner,

you would need to use a straight razor to cut

a single “X” into the headliner material to locate

the hole for the Sun visor retaining bracket.

Step 3: Use a Phillips Screwdriver to screw

Sun visor into place.

Step 4: Repeat on opposite side.

PN: 99-1001-000

QP: RD-WI-001

Chevy Truck • 1988-98

1

TMI Products Chevy Truck 1988-98 Visor Installation guide

Brand: TMI Products

Model: Chevy Truck 1988-98 Visor

Type: Installation guide

Related papers

Other documents