TMI Products 55-57 Chevy Sedan Headliner Installation guide

Type
Installation guide

TMI Products 55-57 Chevy Sedan Headliner is a comprehensive kit that allows for the complete replacement of the headliner in your classic Chevy. With detailed instructions and all necessary hardware included, this kit is designed for a professional installation to ensure a perfect fit and finish. Replace your old, worn-out headliner with this high-quality kit to restore your Chevy's interior to its original glory.

TMI Products 55-57 Chevy Sedan Headliner is a comprehensive kit that allows for the complete replacement of the headliner in your classic Chevy. With detailed instructions and all necessary hardware included, this kit is designed for a professional installation to ensure a perfect fit and finish. Replace your old, worn-out headliner with this high-quality kit to restore your Chevy's interior to its original glory.

Dash Pad Installation Guide
A professional is recomened for
all TMI Products installs
Chevy Bel Air 55-57
Tools needed:
Page 1
PN 99-0165-000
QP XX-XXX REV
Step 1: The headliner goes directly through the rear window opening.
You will need help getting the headliner in the car and installing it. Make
sure you have the headliner centered while preforming all of the
following steps.
Step 2: Re-Installing the rear front
A-pillar and top headliner chrome will
hold the the front of the headliner up
into place. These four front trim pieces
re-install just like factory. Some triming of
material may be necessary so that vinyl is not
sticking out from behind the trim pieces. You
fasten these all the way down.
**NOTE: All headliner trim and rear glass must be removed
prior to installation**
Step 3: Re-Install the quarter window trim. This will hold up the
rear and sides of the headliner. Some triming of material may be
necessary so that vinyl is not sticking out from trim pieces.
Do not tighten this trim piece all the way down as there is still
B and C pillar pieces that need to be installed.
RAZOR BLADE
PHILLIPS SCREWDRIVER
TUCK TOOL
Head Liner Installation Guide
A professional is recomened for
all TMI Products installs
Chevy Bel Air 55-57
Page 2
Step 4: The B-pillar post coverings will rquire some drilling. These will sit
behind the quarter window trim piece. You will drill into the B-pillar
TUBE”. Pre-Fit the B-Pillar post covering. Note the two holes on the
covering to mark locations of where to drill. once the locations are
marked you can drill, Install post covering, and fasten with screws.
Step 5: Installing the C pillar covering. This covering goes between
the rear window lip and the rests behind the quarter window trim
piece. Once this covering is in you can fully tighten down the rear
quarter glass trim piece. During this step you can nal trim and glue
the excess material of the headliner and C-Pillar into the rear window
channel much like a factory headliner. For 55 and 57 cars this is also
the time to re-install the rear window trim. it goes in just as factory
and follows the perimiter of the window stoping at the package tray.
Step 6: Above the door jam you will have raw headliner material that
will need to be trimmed and glued into the factory gab designed for
headliners. In order to tuck the excess material in you will need to use
a headliner tuck tool.
TUBE FOR
SCREWS
Step 7: Now that the headliner and pillar coverings are installed you
can now install sunvisors, rearview mirrors, and dome lights as they will
go in similar to factory.
  • Page 1 1
  • Page 2 2

TMI Products 55-57 Chevy Sedan Headliner Installation guide

Type
Installation guide

TMI Products 55-57 Chevy Sedan Headliner is a comprehensive kit that allows for the complete replacement of the headliner in your classic Chevy. With detailed instructions and all necessary hardware included, this kit is designed for a professional installation to ensure a perfect fit and finish. Replace your old, worn-out headliner with this high-quality kit to restore your Chevy's interior to its original glory.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI