2. Displays2go
  3. SLWLM48MHG

Displays2go SLWLM48MHG, SLWLM48BLK, SLWLM48NAT Operating instructions

  • Hello! I've reviewed the mounting instructions for the Slatwall Panel. This document outlines the steps and tools necessary to install the panel. It specifies the use of expansion screws, Phillips screws, and the requirement of four people for assembly. I am ready to answer any questions you have about mounting your device according to this document.
  • How many people are needed to assemble this unit?
    What kind of screws are used for mounting?
    What tools are needed?
SLATWALL PANEL
MOUNTING INSTRUCTIONS
NOTE: Must have four people to assemble this unit.


 
TOOLS NEEDED


Step 1
I. Mark the top of the panel using a leveler (Figures B & C)
II. Mark the 13 holes using the distances shown in Figure A:
23"
•
Step 2
I.
Use drill and drill bit to make holes in the marked
areas from step 1 (Figure A)
II.
Insert the expansion screw into the holes (Figure B)
III. Have at least 2 people hold the slatwall panel while
another person screws in the #6x158 phillips screws
through the panel and into the wall (Figure C)
/